www.mtt-group.com

Prototype and batch production blowmouldings from low cost mouldsMTT 50/E Semi AutomaticBlow Moulding MachineThe MTT 50/E Blow Moulding machine is specifically designed to fill a nichefor production of short series hollow forms, where the set up time and toolingcosts of a conventional blow moulding machine are prohibitive.The machine is semi automatic with operators unloading parts and initiatingan automatic moulding cycle, ensuring product consistency. It is ideally suitedto batches of up to 1000 and does not require preforms. Materials are fed by ascrew plasticiser and include PE, PP and HDPE.Further information on all of these technologies can be found in our productspecific brochure:English: 2531/2 en.German 2531/2 de.EP Tooling Resin – the process1. Use any type of rapid prototypingmodel including wood, plaster,leather, silicone or resin.Fit metal inserts if required.2. Mix EP Tooling Resin with Hardenerand degas. Fix casting frame andcooling pipes. Cast the EP ToolingResin. Degas again.3. Fix upper casting frame. Cast EPTooling Resin. Degas again.4. Remove the casting frame.5. Heat cure the mould in the oven.6. Completed injection tool.11