Friction door holder and friction casement stay - BJ Waller Limited
Friction door holder and friction casement stay - BJ Waller Limited
Friction door holder and friction casement stay - BJ Waller Limited
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Locking <strong>casement</strong> <strong>stay</strong> for window <strong>and</strong> <strong>door</strong>202220Casement <strong>stay</strong>sFix 202 <strong>and</strong> 220Used for inward-opening windows with sash lipped overframe.202, 220cbaFor sash width less than 500 mm:Fix 202.For sash width over 500 mm: Fix 220.Desired opening position is fixed withthe adjusting screw. Fits both right <strong>and</strong>left.Constructiona) Rod.b) Sash fixture with runner <strong>and</strong>adjusting screw.c) Rod fixture with pin.InstallationinstructionsMaterialRod of anodized aluminium.Brass adjusting screw with polyamidehead.Pin of galvanized brass.Other parts of acetal plastic in white orbrown.202, 220Frame width Item Opening Measure Measuremm no. angle A mm B mmup to 500 202 c:a 80° 95 75over 500 220 c:a 80° 190 75InstallationAssemble the <strong>casement</strong> <strong>stay</strong> for rightorleft-hung sash. Push down the rodfixture pin until it snaps in.Mount according to adjacentinstruction. Measurements from thehinge side. The rod fixture is mountedto place the rod parallel to the sash.ScrewFor rod fixture, useno. 7 (3.8 mm) TKX / DIN 7996.For sash fixture, useno. 6 (3.5 mm) TKFX / DIN 7995.202, 220I 176
Change language