MB-SG50 - Aluprof

• Aesthetically pleasant appearance• Reduced on site installation• Cost effectiveStructurally SiliconeGlazed Curtain WallMB-SG50Mullion cross-sectionTransom cross-sectionThe MB-SG50 system enables to build curtain walls with glazing without the visible aluminum face caps givingan impression of glassy surface from the outside. They come as prefabricated units from the manufacturing sitewhich ensures quality and reduces on site assembly.

MB-SG50MB-SG50 SEMIMB-SG50 base system varietyfeatures glazing units integratedtogether with the use of siliconesealant. The system carries thermalbarrier and triple insulation systemof gaskets that provide enhancedthermal insulation as well aswatertightness and air permeability.The MB-SG50 SEMI variety featureskey benefits of structural glazedcurtain wall and at the same timeoffers delicate picture frame lookwhen viewed externally.FEATURES AND BENEFITS• aesthetically pleasant appearance - the gap between glazing unit is 16 mm.• front glass joint silicone sealed• tilt window does not affect the appearance• mullion drainageTECHNICAL SPECIFICATIONMB-SG50 / MB-SG50 SEMISize and widthDepth mullions85 - 125 mmDepth transoms45 - 105 mmInertia mullions 81,06 - 315,40 cm 4Inertia transoms 35,06 - 166,45 cm 4Glazing thickness28 - 32 mmPERFORMANCEAir PermeabilityWindload resistanceWatertightnessThermal Insulation (U TJ )1430 PaEN 12179:2002U; EN 13116:2002UMB-SG50 / MB-SG50 SEMIClass A4 (600Pa)EN 12153:2002U; EN 12152:2002UClass R7 (600Pa)EN 12155:2002U;EN 12154:2002U1637PaEN 12179:2002U; EN 13116:2002UIt is measured individually and depends upon profile’s combinationThe Member ofGK Kety GroupALUPROF S.A.Head officeul. Warszawska 153, 43-300 Bielsko-Biała, Polandtel. +48 33 81 95 300, fax +48 33 82 20 512e-mail: aluprof@aluprof.euwww.aluprof.eu, www.aluprof.co.ukEN-12.2011