Pricing Guide for Horizontal Above NEMA Motors - Siemens Industry ...

Pricing Guide for HorizontalAboveNEMA Motors – Rev. 2http://www.usa.siemens.com/motors

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 1Part RevRecPage 1Date 06/13Revision RecordRev. No. Section Part Page Date Description0 All All All 11/12 NEW1 2 1 5 12/121. Replaced >1000 hp range for WPII and 1000 hp3. Added missing price for TEFC SH560s Frame.2 1 1, 2, 3 5, 8 06/131750HP, 1800RPM – changed Basic List Price and Std.Rotor Construction2 1 4 3, 5 06/131750HP, 1800RPM – changed Basic List Price and Std.Rotor Construction2 1 1, 2, 3 10 06/131500HP & 1750HP, 1800RPM – changed Basic ListPrice and Std. Rotor Construction2 1 4 7 06/131500HP & 1750HP, 1800RPM – changed Basic ListPrice and Std. Rotor ConstructionAll information in this guide is subject to change without notice.Rev. No. Approved: Title Date0 (Joseph Moreland) Business Manager 6/28/2013

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 1Part GeneralPage 1Date 11/12General InformationAs one of the World’s leading provider of large motors with Global service and support second to none, Siemenssells and manufactures a complete line of motors at the ISO-9001 Certified Norwood, OH plant. This 350,000square foot facility has produced over 150,000 high voltage motors continuously since 1898. The Norwoodplant offers horizontal AC squirrel-cage induction motors through 18,000 horsepower and voltage ranges from460 through 13200 volts. The plant also manufactures a complete line of vertical motors.Larger induction motors as well as wound rotor and synchronous motors are also available from other Siemensplants located in Germany.The following pages covers horizontal induction motors through 5000HP. It is intended for use in pricing themore common ratings, enclosures and modifications. Special features or applications which could affect framesize and, therefore seriously impact cost and price, should be referred to factory for price and availability.Ratings that fall outside those covered in this book, as well as all vertical motors, should also be referred tofactory for pricing and availability.For additional information and updates of our products and services visit our website atwww.usa.siemens.com/motorsand click on the “Large AC Above NEMA motors” link.NOTE: This Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112 supersedes allprevious issues of the Pricing Guide for Horizontal Above NEMA Motors.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 1Part GeneralPage 2Date 11/12General InformationAll ratings in this price guide are designed for the following; Horizontal Mounting 3 phase Class F insulation Service factor of 1.0 Maximum temperature rise of 80 degrees C by resistance at 1.0 service factor Maximum 40 degrees C ambient Altitude of 3300 feet or less Direct connection to a typical centrifugal load with rated voltage and frequency applied at themotor terminals and a load inertia value equal to or less than NEMA value for the rating. Also,during accelerating period, connected load torque shall be equal to, or less than, a torque whichvaries as square of the speed and is equal to 100% of full-load torque at rated speed.Frame sizes are estimated and are subject to change without notice. Frame sizes may have a suffix orcombination of suffixes dependent upon enclosure, bearings, and/or features; D = Flanged. Indicates that motor is to be supplied with a D-flanged bearing housing. S = Short shaft. Indicates motor is to be supplied with Siemens standard short shaft extension fordirect connection except on 680 frame series where no suffix is used. Y = Special mounting. Indicates motor is to be supplied with non-standard mounting dimensions. Z = Special shaft. Indicates motor is to be supplied with non-standard or special shaft dimensions. No Suffix = Indicates that motor is to be supplied with a Siemens standard long shaft extensionexcept on 680 & 800 frame series. The long shaft is provided if Belt Drive modification is madefrom the Modification & Accessories Section.Some 680 frame ratings can be supplied with grease lubricated ball bearings. Refer exact requirementsto factory for price and availability.Lead Times will be per the latest issue of the Norwood Product Lead Times document ANMC- 70000-xxxx.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 1Part EnclPage 3Date 11/12Enclosures – Designed To Meet All Application And Environmental NeedsHorizontal Drip Proof / Weather Protected I (Type CG) / IC01 / IP23Meets or exceeds industry standards for NEMA WP-type machines. Best suited for indoor applications wherenot exposed to extreme ambient conditions. Available through 10,000 HP.Horizontal Drip Proof / Weather Protected II (Type CGII) / IC01 / IP24Meets or exceeds industry standards for NEMA WPII-type machines. Specifically designed for outdoorapplications where motor is not likely to be protected by other structures. Available through 18,000 HP.Totally Enclosed Fan Cooled(Type CZ, CGZ, 1LA4) / IC411 / IP54-IP55Designed for indoor and outdoor applicationswhere internal parts must be protected fromadverse ambient conditions. Utilizes coolingfins on all four quadrants of yoke andhousings. Available through 3,000 HP.Totally Enclosed Air-to-Air Cooled(Type CAZ) / IC611 / IP54Designed for indoor and outdoor applications whereinternal parts must be protected from adverseambient conditions. Utilizes air-to-air tube-type heatexchangers. Available through 14,000 HP.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 1Part EnclPage 4Date 11/12Enclosures – Designed To Meet All Application And Environmental NeedsTotally Enclosed Water-to-Air Cooled (Type CGG) / ICW81 / IP54Same critical design requirements as the air-to-air cooled machine with the added benefit of low noise andefficient water cooling. Available through 18,000 HP.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Machine Readable Product Description (MRPD) StructureSection 1Part MRPDPage 5Date 11/12Siemens Norwood AboveNEMA motors has adopted the Machine-Readable ProductDesignation structure (MRPD). These designations, which are very similar in structure to thoseused by many other Siemens Business Units, will provide a clear means of product designation.The benefits of adopting the MRPD codes include:1) Consistent communication between regional organizations, field sales personnel and thebusiness unit2) Improved processes within Norwood3) Enables smoother transition into product standardization4) Provides a basis for product lead-timesThe MRPD structure is generated by two segments:1) Product codes - 12 Alpha-numeric characters which define: Enclosure Frame-size Motor speed (Number of poles) Rotor construction Voltage / Frequency Type of construction (horizontal, vertical, flange-mounted, etc)2) Option codes - Standard accessoriesThe next several pages describe the Product Code structure for; Modular (ODP/WPI, WPII, TEAAC and TEWAC enclosures) machines. TEFC machines.In the Modifications and Accessories Section, you will find the Option Codes and Categorieslisted. It is important that these codes, both Product and Options, are clearly indicated on theorders.The Categories, explained in more detail later, are listed as the minimum category for the givenoption. The base motor category or other options with higher categories may impact the overallcategory of the motor. The highest category will dictate the applicable lead-time of the motor.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Machine Readable Product Description (MRPD) StructureSection 1Part MRPDPage 6Date 11/12MODULARSub Group FactoryData Position 1 2 3 4 5 6 7 - 8 9 10 11 12 - ZExample 1 R P 2 6 8 E - 2 H E 3 0 - Z1 + 2 Main Group Identification1R Induction Motor (Modular - ODP/WPI, WPII, TEWAC or TEAAC)1S Induction Motor (Modular) - Hazardous Areas3 Sub Group (Enclosure-type & Hazardous Area)1RA ODP / WPI (IP23 / IC01), Non-hazardous Areas1RN TEWAC (IP54 / ICW81), Non-hazardous Areas1RP WPII (IP24 / IC01), Non-hazardous Areas1RQ TEAAC (IP54 / IC611 or IC616), Non-hazardous Areas1SC WPII (IP24 / IC01), Hazardous Areas (Division 2 or Zone 2)1SG TEAAC (IP54 / IC611 or IC616), Hazardous Areas (Division 2 or Zone 2)1SL TEWAC (IP54 / ICW81), Hazardous Areas (Division 2 or Zone 2)4 Factory Specifics2 2 = Norwood-built5 + 6 Frame-size50 500 Frame58 580 Frame68 680 Frame80 800 Frame11 1120 Frame7 Reserved for Factory UseE This position will contain letters for Norwood-built motors8 Number of Poles2 2 pole motor4 4 pole motor6 6 pole motor8 8 pole motor3 10 pole motor5 12 pole motor7 14 pole motor9 Refer to factory for slower speeds9 Cooling TypeODP / WPI, WPII & TEWAC - Standard Internal Fan DesignHTEAAC = Use H Code for TEAACs with Auxiliary Blowers for Cooling (IC616)J TEAAC = Use J Code for TEAACs with Shaft-Mounted External Fan (IC611)10 Rotor ConstructionMotors without VFD (Line Supply Operation) Motors used with VFDB Aluminum Die-cast L Low Voltage Drive - Aluminum RotorE Copper-bar M Low Voltage Drive - Copper RotorN Medium Voltage Drive - Aluminum RotorV Medium Voltage Drive - Copper Rotor11 Voltage, frequencyMedium / High Voltage Applications Low Voltage Applications0 3300 V, 50 hz 0 690 V, --1 6600 V, 60 hz 1 460 V, 60 hz2 13200 V, 60 hz 2 575 V, 60 hz3 4160 V, 60 hz 3 380 V, 50 hz4 4000 V, 60 hz 4 415 V, 50 hz5 2300 V, 60 hz 5 500 V, --6 6000 V, 50 hz 67 6600 V, 50 hz 7 660 V, --8 10000 V, 50 hz 89 other voltage/frequency 9 other voltage/frequency12 Mounting0 Horizontal, foot-mounted1 NEMA D-Flange, with feet3 Vertical, hollow shaft4 Vertical, solid shaft, with canopy8 Vertical, solid shaft, without canopy9 Other types of mounting (requires additional text)13 Option CodeZ Means that the motors will have additional optionsMainGroupFramesizeReserved# of PolesCooling TypeRotorTypeVolts / HzMountingOptions

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Machine Readable Product Description (MRPD) StructureSection 1Part MRPDPage 7Date 11/12TEFC(All frames except SH560)MainGroupS ub Group FactoryFramesizeReserved# of PolesRotor TypeLineSupplyorVFDVolts / HzMountingOptionsData Position 1 2 3 4 5 6 7 - 8 9 10 11 12 - ZExample 1 L A 2 5 8 E - 2 L N 3 0 - Z1 + 2 Main Group Identification1L Induction Motor (TE FC), Non-Hazardous Area1M Induction Motor (TE FC), Hazardous Area (Div. or Zone 2)1P Induction Motor for special application (TEAO)3 Sub Group (Enclosure-type & Hazardous Area)A TEFC, IP54, Basic VersionQ TEAO - Forced-ventilatedS TEFC, IP54, Hazardous Area (Division 2 or Zone 2)4 Factory Specifics2 2 = Norwood-built5 + 6 Fra me-size40 SH400 Frame45 SH450 Frame50 500 Frame58 580 Frame70 708 Frame78 780 Frame88 880 Frame7 Re served for Fa ctory UseE This position will contain letters for Norwood-built motors8 Number of Poles2 2 pole motor4 4 pole motor6 6 pole motor8 8 pole motor3 10 pole motor5 12 pole motor7 14 pole motor9 Refer to factory for slower speeds9 Rotor TypeL Aluminum die-castN Copper-bar10 Line Supply or VFD (LV or MV )A Line-supply; Low V oltage (1000 V)11 Voltage, frequencyLine supply operation, MV / HV MV drive converter operation Line supply/drive converter operation, LV0 3300 V, 50 hz 0 2.3kV, 50 hz 0 690 V1 6600 V, 60 hz 1 2.3 kV, 60 hz 1 460 V2 2300 V, 60 hz 2 3.3 kV, 50 hz 2 575 V3 3000 V, 50 hz 3 3.3 kV, 60 hz 5 500 V4 4160 V, 60 hz 4 4.16 kV, 50 hz 7 660 V5 4000 V, 60 hz 5 4.16 kV, 60 hz 9 Other Voltages6 6000 V, 50 hz7 6600 V, 50 hz9 other voltage/frequency12 Mounting0 Horizontal, foot-mounted1 NE MA D-Flange, with feet9 Other types of mounting (requires additional text)13 Option CodeZ M eans that the motors will have additional options

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Machine Readable Product Description (MRPD) StructureSection 1Part MRPDPage 8Date 11/12TEFC(SH5 60 F rame On ly )MainGroupS ub Group FactoryFramesizeReserved# of PolesRotor TypeLineSupplyorVFDVolts / HzMountingOptionsData Position 1 2 3 4 5 6 7 - 8 9 10 11 12 - ZExample 1 L A 4 5 6 0 - 2 C N 5 0 - Z1 + 2 Upper and Main Group Identifica tion1L Induction Motor (TE FC-IP55), Non-Hazardous Area1M Induction Motor (TE FC-IP55), Hazardous Area (Div. or Zone 2)1P Induction Motor for special application (TEAO)3 L ow er GroupA Squirrel-cage, basic versionQ TEAO - Forced-ventilatedS TEFC Hazardous Area (Division 2 or Zone 2)4 Series4 H-Com pac t II5 + 6 Shaft Height56 SH560 Frame7 Co de fo r re l ati ve le ng th of th e stato r core0 Short 4 Long2 Medium 6 Extra long8 Number of Poles2 2 pole motor4 4 pole motor6 6 pole motor8 8 pole motor9 Refer to factory for slower speeds9 Rotor TypeA Aluminum die-castC Copper-bar10 Line Supply or VFD (LV or MV )A Line-supply; Low V oltageM MasterdrivesN Line-supply; High V oltageV MV drive convertersW Other drive converters11 Voltage, frequencyLine supply operation, MV / HV MV drive converter operation Line supply/drive converter operation, LV0 3300 V, 50 hz 0 2.3kV, 50 hz 0 690 V1 6600 V, 60 hz 1 2.3 kV, 60 hz 1 460 V3 3000 V, 50 hz 2 3.3 kV, 50 hz 2 575 V4 4160 V, 60 hz 3 3.3 kV, 60 hz 5 500 V5 4000 V, 60 hz 4 4.16 kV, 50 hz 7 660 V6 6000 V, 50 hz 5 4.16 kV, 60 hz 9 Other Voltages7 6600 V, 50 hz9 other voltage/frequency12 Mounting0 Horizontal, foot-mounted9 Other types of mounting (requires additional text)13 Option CodeZ M eans that the motors will have additional options

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 1Part IndexPage 9Date 11/12IndexSection 1 Base List Prices, Frame, and FeaturesPagePart 1 - ODP Enclosure - 60 Hertz 1-10Part 2 - WPI Enclosure - 60 Hertz 1-10Part 3 - WPII Enclosure - 60 Hertz 1-10Part 4 - TEWAC Enclosure - 60 Hertz 1-7Part 5 - TEFC Enclosure - 60 Hertz 1-10Part 6 - TEAAC Enclosure - 60 Hertz 1-7Part 1A - ODP Enclosure - 50 Hertz 1-3Part 2A - WPI Enclosure - 50 Hertz 1-3Part 3A - WPII Enclosure - 50 Hertz 1-3Part 4A - TEWAC Enclosure – 50 Hertz 1-2Part 5A - TEFC Enclosure - 50 Hertz 1-2Part 6A - TEAAC Enclosure - 50 Hertz 1-2Part 5B – TEFC Enclosure per IEEE 841 Std – 2009 1-4Section 2 Modifications & AccessoriesAdjustable Speed Drives 1Altitude 2Ambient 2API 541 – 3 rd or 4 th Editions 3API 547 – 2005 3-6Assembly 7Balance – Precision Balance for Low Vibration 7Balance – Special 7Bearings – Insulation 8Bearings – Lubrication Systems 8Bearings - Oil Sump Heaters 8Bearing Protective Devices – Mechanical 9Bearing Protective Devices – Temperature 10-11Bearings – Sleeve 12Belt Drive Applications 13Cancellation Charges 14Chipper/Crusher Drives 14Couplings 15Current Transformers 15Differential Pressure Switch 15Direction of Rotation 15All information in this guide is subject to change without notice. Please contact your local Siemens salesrepresentative for information or assistance with any ratings or modifications not found in this book or with anySiemens products.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 1Part IndexPage 10Date 11/12IndexSection 2 Modifications & Accessories - continuedPageEfficiency – Higher Than Standard 15Export Packaging 16Fan - External Cooling 16-17Fan Housing 17Filters 18Flanges 18Freight 18Frequency - 50 Hertz 18Ground Pads 19Hardware 19Hazardous Location / Temperature Code 19IEEE 841 19Inrush Current 19Insulation 20Load Inertia 20Noise Requirements 21Paint Systems 22Rotor Construction / Corrosion Protection 22Service Factor 23Shaft Extension 23Shaft Seal 23Shipment Terms & Packaging 24Software Packages 24Soleplates / Slide Rails / Shims 24Space Heaters 25Starting – Reduced Voltage/Soft Start 25Startup Assistance 25Stator - Connections 25Stator -Insulation/Treatments 26Stator - Protective Devices 26Terminal Boxes / Differential & Surge Protection / Current Transformers /Standoff Insulators27-28Tests 29-30Torques – Non-Standard 31Voltages 31Warranty Offerings 31All information in this guide is subject to change without notice. Please contact your local Siemens salesrepresentative for information or assistance with any ratings or modifications not found in this book or with anySiemens products.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionODP ENCLOSURE-60 Hertz 460 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 1Page 1Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 3600 460 508 $45,956 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2506-2BA10200 1800 460 508 $41,605 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2507-4BA10200 1200 460 508 $42,909 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-6BA10200 900 460 508 $44,841 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-8BA10200 720 460 588 $55,192 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2612-3BA10200 600 460 588 $55,753 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2614-5BA10200 514 460 588 $93,427 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2618-7BD10200 450 460 588 $93,427 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2618-9BD10250 3600 460 508 $46,690 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2506-2BA10250 1800 460 508 $42,909 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BA10250 1200 460 508 $44,841 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-6BA10250 900 460 508 $47,127 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-8BA10250 720 460 588 $56,060 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2612-3BA10250 600 460 588 $67,335 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2616-5BA10250 514 460 588 $96,326 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2621-7BD10300 3600 460 508 $46,540 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BA10300 1800 460 508 $43,551 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BA10300 1200 460 508 $47,127 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-6BA10300 900 460 508 $50,971 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-8BA10300 720 460 588 $59,271 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2614-3BA10300 600 460 588 $76,037 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-5BA10300 514 460 5810 $102,098 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2623-7BD10350 3600 460 508 $47,260 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BA10350 1800 460 508 $44,841 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-4BA10350 1200 460 508 $49,053 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-6BA10350 900 460 508 $53,717 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-8BA10350 720 460 588 $67,335 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2616-3BA10350 600 460 5810 $84,710 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-5BA10400 3600 460 508 $48,537 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BA10400 1800 460 508 $47,127 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BA10400 1200 460 508 $49,787 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-6BA10400 900 460 5010 $61,587 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2525-8BA10400 720 460 588 $76,037 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-3BA10400 600 460 5810 $96,421 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-5BA10450 3600 460 508 $49,288 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BA10450 1800 460 508 $47,832 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BA10450 1200 460 5010 $58,389 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-6BA10450 900 460 5010 $65,714 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2530-8BA10450 720 460 588 $78,939 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-3BA10450 600 460 5810 $117,668 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-5BD10500 3600 460 508 $52,884 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BA10500 1800 460 508 $49,053 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BA10500 1200 460 5010 $62,050 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2525-6BA10500 900 460 588 $76,037 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-8BA10500 720 460 5810 $84,710 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-3BA10500 600 460 5810 $119,489 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-5BD10TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionODP ENCLOSURE-60 Hertz 460 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 1Page 2Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient600 3600 460 508 $53,703 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BA10600 1800 460 508 $50,971 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-4BA10600 1200 460 5010 $63,885 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-6BA10600 900 460 588 $78,939 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-8BA10600 720 460 5810 $100,280 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-3BA10700 3600 460 508 $57,244 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2515-2BA10700 1800 460 5010 $58,389 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-4BA10700 1200 460 588 $76,037 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-6BA10700 900 460 5810 $96,421 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-8BA10800 3600 460 5010 $65,665 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BA10800 1800 460 5010 $60,218 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2523-4BA10800 1200 460 588 $78,939 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BA10800 900 460 5810 $100,280 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-8BA10TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionODP ENCLOSURE-60 Hertz 2300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 1Page 3Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 3600 2300 508 $47,491 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB50200 1800 2300 508 $43,820 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BB50200 1200 2300 508 $43,820 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-6BB50200 900 2300 508 $45,749 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-8BB50200 720 2300 588 $57,536 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2612-3BB50200 600 2300 588 $58,704 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2614-5BB50200 514 2300 588 $97,262 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2621-7BE50200 450 2300 6811 $171,327 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-9BE50250 3600 2300 508 $48,226 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB50250 1800 2300 508 $44,476 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BB50250 1200 2300 508 $45,749 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-6BB50250 900 2300 508 $49,965 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-8BB50250 720 2300 588 $58,440 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2612-3BB50250 600 2300 588 $77,570 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-5BB50250 514 2300 5810 $103,976 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2623-7BE50250 450 2300 6811 $174,038 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-9BE50300 3600 2300 508 $48,984 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB50300 1800 2300 508 $45,749 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-4BB50300 1200 2300 508 $48,035 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-6BB50300 900 2300 508 $54,637 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-8BB50300 720 2300 588 $61,125 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2614-3BB50300 600 2300 588 $79,875 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-5BB50300 514 2300 5810 $117,780 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-7BE50300 450 2300 6811 $176,836 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-9BE50350 3600 2300 508 $49,767 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB50350 1800 2300 508 $48,035 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB50350 1200 2300 508 $49,965 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-6BB50350 900 2300 5010 $64,799 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-8BB50350 720 2300 588 $69,402 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2616-3BB50350 600 2300 5810 $86,588 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-5BB50350 514 2300 6811 $171,327 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-7BE50350 450 2300 6811 $180,664 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-9BE50400 3600 2300 508 $50,662 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB50400 1800 2300 508 $48,754 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB50400 1200 2300 508 $51,894 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-6BB50400 900 2300 5010 $66,634 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2530-8BB50400 720 2300 588 $77,570 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-3BB50400 600 2300 5810 $96,814 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-5BB50400 514 2300 6811 $177,763 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-7BE50400 450 2300 6811 $183,522 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-9BE50TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionODP ENCLOSURE-60 Hertz 2300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 1Page 4Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient450 3600 2300 508 $51,446 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB50450 1800 2300 508 $49,965 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB50450 1200 2300 5010 $59,307 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-6BB50450 900 2300 588 $77,570 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-8BB50450 720 2300 588 $79,875 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-3BB50450 600 2300 5810 $117,780 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-5BE50450 514 2300 6811 $180,576 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-7BE50450 450 2300 6811 $190,617 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-9BE50500 3600 2300 508 $52,255 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB50500 1800 2300 508 $50,713 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB50500 1200 2300 5010 $62,782 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2525-6BB50500 900 2300 588 $79,875 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-8BB50500 720 2300 5810 $86,588 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-3BB50500 600 2300 6811 $171,327 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-5BE50500 514 2300 6811 $190,617 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-7BE50500 450 2300 6811 $197,047 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-9BE50600 3600 2300 508 $53,832 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB50600 1800 2300 508 $51,894 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-4BB50600 1200 2300 5010 $64,799 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-6BB50600 900 2300 5810 $96,814 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-8BB50600 720 2300 5810 $100,393 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-3BB50600 600 2300 6811 $177,763 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-5BE50600 514 2300 6811 $201,748 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-7BE50600 450 2300 6811 $208,181 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2732-9BE50700 3600 2300 508 $54,666 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB50700 1800 2300 5010 $60,985 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2523-4BB50700 1200 2300 588 $79,875 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB50700 900 2300 5810 $100,393 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-8BB50700 720 2300 6811 $177,763 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-3BE50700 600 2300 6811 $184,190 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2723-5BE50700 514 2300 6813 $228,003 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2734-7BE50700 450 2300 6813 $253,720 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-9BE50800 3600 2300 508 $58,186 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2515-2BB50800 1800 2300 5010 $64,799 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-4BB50800 1200 2300 588 $81,111 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB50800 900 2300 5810 $117,780 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-8BE50800 720 2300 6811 $190,617 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE50800 600 2300 6811 $197,047 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-5BE50800 514 2300 6813 $247,287 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-7BE50900 3600 2300 5010 $66,610 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB50900 1800 2300 5010 $65,769 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-4BB50900 1200 2300 5810 $86,588 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-6BB50900 900 2300 5812 $133,445 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-8BE50900 720 2300 6811 $193,633 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE50900 600 2300 6811 $201,748 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-5BE50900 514 2300 6813 $253,720 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-7BE50TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionODP ENCLOSURE-60 Hertz 2300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 1Page 5Date /1AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient1000 3600 2300 5010 $69,790 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB501000 1800 2300 5810 $82,549 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-4BB501000 1200 2300 5810 $117,780 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-6BE501000 900 2300 5812 $144,463 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-8BE501000 720 2300 6811 $197,047 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-3BE501000 600 2300 6813 $234,436 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-5BE501250 3600 2300 5010 $76,125 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2523-2BB501250 1800 2300 5810 $96,814 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-4BB501250 1200 2300 5812 $133,445 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-6BE501250 900 2300 6811 $182,464 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-8BE501250 720 2300 6813 $228,003 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2734-3BE501250 600 2300 6813 $253,720 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-5BE501500 3600 2300 5810 $94,249 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2623-2BB501500 1800 2300 5810 $100,393 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-4BB501500 1200 2300 5812 $144,463 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-6BE501500 900 2300 6811 $195,327 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-8BE501500 720 2300 6813 $247,287 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-3BE501750 3600 2300 5810 $95,741 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2623-2BB501750 1800 2300 5812 $133,079 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-4BB501750 1200 2300 6811 $195,327 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-6BE501750 900 2300 6813 $228,003 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-8BE501750 720 2300 6813 $253,720 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-3BE502000 3600 2300 5810 $105,427 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2623-2BB502000 1800 2300 5812 $144,095 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-4BE502000 1200 2300 6813 $221,579 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2734-6BE502000 900 2300 6813 $240,863 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-8BE502250 3600 2300 5812 $125,783 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2627-2BB502250 1800 2300 6811 $175,617 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-4BE502250 1200 2300 6813 $234,436 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2738-6BE502500 3600 2300 5812 $134,029 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2632-2BB502500 1800 2300 6811 $180,439 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-4BE502500 1200 2300 6813 $240,863 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-6BE503000 3600 2300 6811 $183,920 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2723-2BE503000 1800 2300 6813 $203,978 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2732-4BE503500 3600 2300 6813 $210,856 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2727-2BE503500 1800 2300 6813 $216,832 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-4BE504000 3600 2300 6813 $217,454 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2730-2BE504000 1800 2300 6813 $229,695 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-4BE504500 3600 2300 6813 $224,054 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2732-2BE505000 3600 2300 6813 $230,661 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2734-2BE50TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionODP ENCLOSURE-60 Hertz 4000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 1Page 6Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 3600 4000 508 $48,912 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB40200 1800 4000 508 $45,201 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BB40200 1200 4000 508 $45,201 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-6BB40200 900 4000 508 $49,413 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-8BB40200 720 4000 588 $58,796 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2612-3BB40200 600 4000 588 $70,470 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2616-5BB40200 514 4000 5810 $104,595 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2623-7BE40200 450 4000 6811 $172,349 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-9BE40250 3600 4000 508 $49,669 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB40250 1800 4000 508 $45,877 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BB40250 1200 4000 508 $47,127 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-6BB40250 900 4000 508 $53,265 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-8BB40250 720 4000 588 $62,131 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2614-3BB40250 600 4000 588 $78,881 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-5BB40250 514 4000 5810 $106,214 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2623-7BE40250 450 4000 6811 $175,076 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-9BE40300 3600 4000 508 $50,450 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB40300 1800 4000 508 $47,127 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-4BB40300 1200 4000 508 $49,413 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-6BB40300 900 4000 5010 $62,363 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2523-8BB40300 720 4000 588 $70,470 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2616-3BB40300 600 4000 588 $81,991 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-5BB40300 514 4000 6811 $172,349 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-7BE40300 450 4000 6811 $178,782 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-9BE40350 3600 4000 508 $51,256 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB40350 1800 4000 508 $49,413 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB40350 1200 4000 508 $51,345 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-6BB40350 900 4000 5010 $66,171 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-8BB40350 720 4000 588 $78,881 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-3BB40350 600 4000 5810 $87,207 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-5BB40350 514 4000 6811 $178,782 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-7BE40350 450 4000 6811 $181,611 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-9BE40400 3600 4000 508 $52,082 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB40400 1800 4000 508 $50,153 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB40400 1200 4000 508 $53,265 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-6BB40400 900 4000 5010 $82,029 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2530-8BE40400 720 4000 588 $81,991 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-3BB40400 600 4000 5810 $98,921 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-5BB40400 514 4000 6811 $181,611 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-7BE40400 450 4000 6811 $185,209 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2723-9BE40TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionODP ENCLOSURE-60 Hertz 4000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 1Page 8Date /1AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient1000 3600 4000 5010 $71,201 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB401000 1800 4000 5810 $83,701 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-4BB401000 1200 4000 5810 $119,003 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-6BE401000 900 4000 5812 $145,686 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-8BE401000 720 4000 6811 $202,763 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-3BE401000 600 4000 6813 $237,701 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-5BE401250 3600 4000 5010 $77,546 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2523-2BB401250 1800 4000 5810 $98,921 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-4BB401250 1200 4000 5812 $134,671 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-6BE401250 900 4000 6811 $183,474 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-8BE401250 720 4000 6813 $237,701 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-3BE401250 600 4000 6813 $256,988 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-5BE401500 3600 4000 5810 $97,212 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2623-2BB401500 1800 4000 5810 $101,616 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-4BB401500 1200 4000 5812 $145,686 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-6BE401500 900 4000 6811 $196,336 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-8BE401500 720 4000 6813 $256,988 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-3BE401750 3600 4000 5810 $98,750 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2623-2BB401750 1800 4000 5812 $1,8 Ball - Grease Lube Self Bi-directional CG 1RA2634-4BB401750 1200 4000 6811 $196,336 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-6BE401750 900 4000 6813 $231,274 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-8BE401750 720 4000 6813 $261,054 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-3BE402000 3600 4000 5810 $108,485 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2623-2BB402000 1800 4000 5812 $145,320 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-4BE402000 1200 4000 6813 $224,847 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2734-6BE402000 900 4000 6813 $244,137 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-8BE402250 3600 4000 5812 $138,322 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2632-2BB402250 1800 4000 6811 $176,636 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-4BE402250 1200 4000 6813 $237,701 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2738-6BE402500 3600 4000 5812 $140,382 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2632-2BB402500 1800 4000 6811 $181,464 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-4BE402500 1200 4000 6813 $244,137 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-6BE403000 3600 4000 6811 $184,955 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2723-2BE403000 1800 4000 6813 $207,249 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2732-4BE403500 3600 4000 6813 $214,220 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2727-2BE403500 1800 4000 6813 $220,109 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-4BE404000 3600 4000 6813 $220,815 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2730-2BE404000 1800 4000 6813 $232,960 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-4BE404500 3600 4000 6813 $227,415 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2732-2BE405000 3600 4000 6813 $234,019 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2734-2BE40TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionODP ENCLOSURE-60 Hertz 6600 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 1Page 9Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient300 1800 6600 508 $53,537 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB10350 1800 6600 508 $54,338 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB10350 1200 6600 588 $84,262 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB10350 900 6600 588 $81,152 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-8BB10350 720 6600 6811 $175,617 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-3BE10350 600 6600 6811 $175,617 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-5BE10400 3600 6600 508 $55,159 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB10400 1800 6600 508 $55,463 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB10400 1200 6600 588 $85,567 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB10400 900 6600 588 $82,409 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-8BB10400 720 6600 6811 $178,396 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-3BE10400 600 6600 6811 $182,047 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-5BE10450 3600 6600 508 $56,012 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB10450 1800 6600 5010 $62,581 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-4BB10450 1200 6600 588 $86,912 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB10450 900 6600 588 $84,262 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-8BB10450 720 6600 6811 $182,047 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-3BE10450 600 6600 6811 $184,927 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-5BE10450 514 6600 6811 $201,336 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-7BE10500 3600 6600 508 $59,518 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB10500 1800 6600 5010 $64,799 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-4BB10500 1200 6600 588 $88,300 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB10500 900 6600 5810 $106,515 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-8BB10500 720 6600 6811 $184,927 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-3BE10500 600 6600 6811 $188,477 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2723-5BE10500 514 6600 6811 $206,037 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-7BE10600 3600 6600 5010 $69,247 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB10600 1800 6600 5010 $66,481 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2523-4BB10600 1200 6600 5810 $101,735 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-6BB10600 900 6600 5810 $123,902 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-8BE10600 720 6600 6811 $187,900 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-3BE10600 600 6600 6811 $201,336 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-5BE10600 514 6600 6813 $240,975 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-7BE10700 3600 6600 5010 $70,319 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB10700 1800 6600 5010 $68,460 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2525-4BB10700 1200 6600 5810 $119,122 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2625-6BE10700 900 6600 5812 $133,445 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2630-8BE10700 720 6600 6811 $194,903 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE10700 600 6600 6811 $204,522 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-5BE10700 514 6600 6813 $253,832 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-7BE10800 3600 6600 5010 $75,463 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB10800 1800 6600 588 $81,152 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-4BB10800 1200 6600 5812 $133,445 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2630-6BE10800 900 6600 5812 $139,561 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-8BE10800 720 6600 6811 $197,987 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE10800 600 6600 6811 $212,467 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2732-5BE10TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionODP ENCLOSURE-60 Hertz 6600 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 1Page 10Date AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient900 3600 6600 5010 $76,632 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB10900 1800 6600 5810 $86,509 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-4BB10900 1200 6600 5812 $139,561 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-6BE10900 900 6600 6811 $180,321 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2723-8BE10900 720 6600 6811 $206,037 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-3BE10900 600 6600 6813 $240,975 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-5BE101000 3600 6600 5010 $77,836 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB101000 1800 6600 5810 $90,037 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-4BB101000 1200 6600 5812 $145,686 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2634-6BE101000 900 6600 6811 $186,751 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-8BE101000 720 6600 6813 $234,542 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2734-3BE101000 600 6600 6813 $253,832 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-5BE101250 3600 6600 5810 $98,280 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2621-2BB101250 1800 6600 5810 $101,735 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-4BB101250 1200 6600 6811 $186,751 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-6BE101250 900 6600 6811 $199,607 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-8BE101250 720 6600 6813 $260,259 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-3BE101500 3600 6600 5810 $106,854 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2623-2BB101500 1800 6600 5812 $1,0 Ball - Grease Lube Self Bi-directional CG 1RA2634-4BB101500 1200 6600 6811 $199,607 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-6BE101500 900 6600 6813 $234,542 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-8BE101750 3600 6600 5810 $108,544 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2623-2BB101750 1800 6600 5812 $147,570 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2634-4BB101750 1200 6600 6813 $228,118 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2734-6BE101750 900 6600 6813 $247,405 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-8BE102000 3600 6600 5812 $138,322 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2630-2BB102000 1800 6600 6811 $184,729 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-4BE102000 1200 6600 6813 $240,975 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2738-6BE102250 3600 6600 5812 $144,590 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2632-2BB102250 1800 6600 6811 $196,729 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-4BE102250 1200 6600 6813 $247,405 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-6BE102500 3600 6600 6811 $188,319 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2723-2BE102500 1800 6600 6813 $216,950 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2734-4BE103000 3600 6600 6813 $194,476 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2725-2BE103000 1800 6600 6813 $229,810 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2738-4BE103500 3600 6600 6813 $224,185 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2730-2BE103500 1800 6600 6813 $236,240 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-4BE104000 3600 6600 6813 $237,377 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2734-2BE10TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPI ENCLOSURE-60 Hertz 460 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 2Page 1Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 3600 460 508 $46,692 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2506-2BA10200 1800 460 508 $42,305 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2507-4BA10200 1200 460 508 $43,599 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-6BA10200 900 460 508 $45,531 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-8BA10200 720 460 588 $56,690 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2612-3BA10200 600 460 588 $57,229 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2614-5BA10200 514 460 588 $94,902 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2618-7BD10200 450 460 588 $94,902 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2618-9BD10250 3600 460 508 $47,438 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2506-2BA10250 1800 460 508 $43,599 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BA10250 1200 460 508 $45,531 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-6BA10250 900 460 508 $47,817 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-8BA10250 720 460 588 $57,582 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2612-3BA10250 600 460 588 $68,811 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2616-5BA10250 514 460 588 $97,802 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2621-7BD10300 3600 460 508 $47,253 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BA10300 1800 460 508 $44,251 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BA10300 1200 460 508 $47,817 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-6BA10300 900 460 508 $51,661 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-8BA10300 720 460 588 $60,747 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2614-3BA10300 600 460 588 $77,512 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-5BA10300 514 460 5810 $103,573 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2623-7BD10350 3600 460 508 $47,985 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BA10350 1800 460 508 $45,531 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-4BA10350 1200 460 508 $49,743 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-6BA10350 900 460 508 $54,407 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-8BA10350 720 460 588 $68,811 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2616-3BA10350 600 460 5810 $86,186 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-5BA10400 3600 460 508 $49,250 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BA10400 1800 460 508 $47,817 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BA10400 1200 460 508 $50,488 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-6BA10400 900 460 5010 $62,277 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2525-8BA10400 720 460 588 $77,512 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-3BA10400 600 460 5810 $97,896 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-5BA10450 3600 460 508 $50,012 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BA10450 1800 460 508 $48,533 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BA10450 1200 460 5010 $59,080 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-6BA10450 900 460 5010 $66,404 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2530-8BA10450 720 460 588 $80,415 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-3BA10450 600 460 5810 $119,143 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-5BD10500 3600 460 508 $53,598 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BA10500 1800 460 508 $49,743 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BA10500 1200 460 5010 $62,740 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2525-6BA10500 900 460 588 $77,512 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-8BA10500 720 460 5810 $86,186 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-3BA10500 600 460 5810 $120,988 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-5BD10TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPI ENCLOSURE-60 Hertz 460 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 2Page 2Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient600 3600 460 508 $54,427 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BA10600 1800 460 508 $51,661 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-4BA10600 1200 460 5010 $64,575 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-6BA10600 900 460 588 $80,415 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-8BA10600 720 460 5810 $101,756 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-3BA10700 3600 460 508 $57,957 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2515-2BA10700 1800 460 5010 $59,080 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-4BA10700 1200 460 588 $77,512 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-6BA10700 900 460 5810 $97,896 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-8BA10800 3600 460 5010 $66,378 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BA10800 1800 460 5010 $60,909 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2523-4BA10800 1200 460 588 $80,415 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BA10800 900 460 5810 $101,756 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-8BA10TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPI ENCLOSURE-60 Hertz 2300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 2Page 3Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 3600 2300 508 $48,204 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB50200 1800 2300 508 $44,510 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BB50200 1200 2300 508 $44,510 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-6BB50200 900 2300 508 $46,440 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-8BB50200 720 2300 588 $59,034 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2612-3BB50200 600 2300 588 $60,180 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2614-5BB50200 514 2300 588 $98,738 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2621-7BE50200 450 2300 6811 $174,860 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-9BE50250 3600 2300 508 $48,950 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB50250 1800 2300 508 $45,177 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BB50250 1200 2300 508 $46,440 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-6BB50250 900 2300 508 $50,655 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-8BB50250 720 2300 588 $59,962 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2612-3BB50250 600 2300 588 $79,046 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-5BB50250 514 2300 5810 $105,451 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2623-7BE50250 450 2300 6811 $177,627 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-9BE50300 3600 2300 508 $49,720 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB50300 1800 2300 508 $46,440 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-4BB50300 1200 2300 508 $48,726 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-6BB50300 900 2300 508 $55,327 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-8BB50300 720 2300 588 $62,601 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2614-3BB50300 600 2300 588 $81,351 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-5BB50300 514 2300 5810 $119,256 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-7BE50300 450 2300 6811 $180,482 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-9BE50350 3600 2300 508 $50,514 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB50350 1800 2300 508 $48,726 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB50350 1200 2300 508 $50,655 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-6BB50350 900 2300 5010 $65,490 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-8BB50350 720 2300 588 $70,878 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2616-3BB50350 600 2300 5810 $88,064 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-5BB50350 514 2300 6811 $174,860 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-7BE50350 450 2300 6811 $184,196 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-9BE50400 3600 2300 508 $51,375 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB50400 1800 2300 508 $49,455 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB50400 1200 2300 508 $52,584 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-6BB50400 900 2300 5010 $67,324 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2530-8BB50400 720 2300 588 $79,046 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-3BB50400 600 2300 5810 $98,290 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-5BB50400 514 2300 6811 $181,296 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-7BE50400 450 2300 6811 $187,111 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-9BE50TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPI ENCLOSURE-60 Hertz 2300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 2Page 4Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient450 3600 2300 508 $52,170 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB50450 1800 2300 508 $50,655 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB50450 1200 2300 5010 $59,997 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-6BB50450 900 2300 588 $79,046 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-8BB50450 720 2300 588 $81,351 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-3BB50450 600 2300 5810 $119,256 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-5BE50450 514 2300 6811 $184,165 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-7BE50450 450 2300 6811 $194,150 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-9BE50500 3600 2300 508 $52,991 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB50500 1800 2300 508 $51,413 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB50500 1200 2300 5010 $63,472 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2525-6BB50500 900 2300 588 $81,351 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-8BB50500 720 2300 5810 $88,064 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-3BB50500 600 2300 6811 $174,860 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-5BE50500 514 2300 6811 $194,150 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-7BE50500 450 2300 6811 $200,579 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-9BE50600 3600 2300 508 $54,546 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB50600 1800 2300 508 $52,584 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-4BB50600 1200 2300 5010 $65,490 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-6BB50600 900 2300 5810 $98,290 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-8BB50600 720 2300 5810 $101,869 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-3BB50600 600 2300 6811 $181,296 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-5BE50600 514 2300 6811 $205,280 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-7BE50600 450 2300 6811 $211,713 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2732-9BE50700 3600 2300 508 $55,390 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB50700 1800 2300 5010 $61,676 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2523-4BB50700 1200 2300 588 $81,351 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB50700 900 2300 5810 $101,869 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-8BB50700 720 2300 6811 $181,296 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-3BE50700 600 2300 6811 $187,723 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2723-5BE50700 514 2300 6813 $231,536 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2734-7BE50700 450 2300 6813 $257,252 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-9BE50800 3600 2300 508 $58,899 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2515-2BB50800 1800 2300 5010 $65,490 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-4BB50800 1200 2300 588 $82,610 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB50800 900 2300 5810 $119,256 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-8BE50800 720 2300 6811 $194,150 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE50800 600 2300 6811 $200,579 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-5BE50800 514 2300 6813 $250,819 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-7BE50900 3600 2300 5010 $67,323 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB50900 1800 2300 5010 $66,470 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-4BB50900 1200 2300 5810 $88,064 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-6BB50900 900 2300 5812 $134,921 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-8BE50900 720 2300 6811 $197,222 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE50900 600 2300 6811 $205,280 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-5BE50900 514 2300 6813 $257,252 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-7BE50TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPI ENCLOSURE-60 Hertz 2300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 2Page 5Date 06/13AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient1000 3600 2300 5010 $70,503 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB501000 1800 2300 5810 $84,024 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-4BB501000 1200 2300 5810 $119,256 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-6BE501000 900 2300 5812 $145,939 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-8BE501000 720 2300 6811 $200,579 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-3BE501000 600 2300 6813 $237,969 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-5BE501250 3600 2300 5010 $76,838 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2523-2BB501250 1800 2300 5810 $98,290 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-4BB501250 1200 2300 5812 $134,921 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-6BE501250 900 2300 6811 $185,997 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-8BE501250 720 2300 6813 $231,536 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2734-3BE501250 600 2300 6813 $257,252 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-5BE501500 3600 2300 5810 $95,757 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2623-2BB501500 1800 2300 5810 $101,869 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-4BB501500 1200 2300 5812 $145,939 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-6BE501500 900 2300 6811 $198,860 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-8BE501500 720 2300 6813 $250,819 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-3BE501750 3600 2300 5810 $97,272 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2623-2BB501750 1800 2300 5812 $134,555 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-4BB501750 1200 2300 6811 $198,860 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-6BE501750 900 2300 6813 $231,536 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-8BE501750 720 2300 6813 $257,252 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-3BE502000 3600 2300 5810 $106,984 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2623-2BB502000 1800 2300 5812 $145,570 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-4BE502000 1200 2300 6813 $225,112 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2734-6BE502000 900 2300 6813 $244,396 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-8BE502250 3600 2300 5812 $127,291 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2627-2BB502250 1800 2300 6811 $179,150 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-4BE502250 1200 2300 6813 $237,969 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2738-6BE502500 3600 2300 5812 $135,537 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2632-2BB502500 1800 2300 6811 $183,972 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-4BE502500 1200 2300 6813 $244,396 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-6BE503000 3600 2300 6811 $187,543 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2723-2BE503000 1800 2300 6813 $207,511 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2732-4BE503500 3600 2300 6813 $214,479 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2727-2BE503500 1800 2300 6813 $220,364 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-4BE504000 3600 2300 6813 $221,077 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2730-2BE504000 1800 2300 6813 $233,227 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-4BE504500 3600 2300 6813 $227,677 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2732-2BE505000 3600 2300 6813 $234,284 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2734-2BE50TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPI ENCLOSURE-60 Hertz 4000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 2Page 6Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 3600 4000 508 $49,625 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB40200 1800 4000 508 $45,891 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BB40200 1200 4000 508 $45,891 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-6BB40200 900 4000 508 $50,103 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-8BB40200 720 4000 588 $60,271 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2612-3BB40200 600 4000 588 $71,945 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2616-5BB40200 514 4000 5810 $106,070 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2623-7BE40200 450 4000 6811 $175,882 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-9BE40250 3600 4000 508 $50,393 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB40250 1800 4000 508 $46,578 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2510-4BB40250 1200 4000 508 $47,817 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-6BB40250 900 4000 508 $53,956 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-8BB40250 720 4000 588 $63,607 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2614-3BB40250 600 4000 588 $80,357 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-5BB40250 514 4000 5810 $107,712 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2623-7BE40250 450 4000 6811 $178,665 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-9BE40300 3600 4000 508 $51,186 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB40300 1800 4000 508 $47,817 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-4BB40300 1200 4000 508 $50,103 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-6BB40300 900 4000 5010 $63,053 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2523-8BB40300 720 4000 588 $71,945 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2616-3BB40300 600 4000 588 $83,466 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-5BB40300 514 4000 6811 $175,882 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-7BE40300 450 4000 6811 $182,315 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-9BE40350 3600 4000 508 $52,003 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB40350 1800 4000 508 $50,103 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB40350 1200 4000 508 $52,035 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-6BB40350 900 4000 5010 $66,861 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-8BB40350 720 4000 588 $80,357 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-3BB40350 600 4000 5810 $88,683 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-5BB40350 514 4000 6811 $182,315 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-7BE40350 450 4000 6811 $185,199 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-9BE40400 3600 4000 508 $52,796 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB40400 1800 4000 508 $50,853 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB40400 1200 4000 508 $53,956 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-6BB40400 900 4000 5010 $82,720 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2530-8BE40400 720 4000 588 $83,466 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-3BB40400 600 4000 5810 $100,396 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-5BB40400 514 4000 6811 $185,199 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-7BE40400 450 4000 6811 $188,741 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2723-9BE40TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPI ENCLOSURE-60 Hertz 4000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 2Page 7Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient450 3600 4000 508 $53,613 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB40450 1800 4000 508 $52,035 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB40450 1200 4000 5010 $61,366 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-6BB40450 900 4000 588 $80,357 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-8BB40450 720 4000 5810 $88,683 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-3BB40450 600 4000 5810 $120,479 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-5BE40450 514 4000 6811 $188,741 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2723-7BE40450 450 4000 6811 $201,601 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-9BE40500 3600 4000 508 $54,456 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB40500 1800 4000 508 $52,814 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB40500 1200 4000 5010 $65,032 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2525-6BB40500 900 4000 588 $83,466 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-8BB40500 720 4000 5810 $103,091 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-3BB40500 600 4000 6811 $182,315 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-5BE40500 514 4000 6811 $195,174 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-7BE40500 450 4000 6811 $206,296 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-9BE40600 3600 4000 508 $55,970 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB40600 1800 4000 508 $53,956 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-4BB40600 1200 4000 5010 $66,861 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-6BB40600 900 4000 5810 $100,396 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-8BB40600 720 4000 6811 $175,882 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-3BE40600 600 4000 6811 $185,199 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-5BE40600 514 4000 6811 $206,296 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-7BE40600 450 4000 6813 $241,234 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-9BE40700 3600 4000 508 $56,836 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB40700 1800 4000 5010 $63,053 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2523-4BB40700 1200 4000 588 $83,466 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB40700 900 4000 5810 $103,091 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-8BB40700 720 4000 6811 $182,315 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-3BE40700 600 4000 6811 $188,741 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2723-5BE40700 514 4000 6813 $234,807 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2734-7BE40700 450 4000 6813 $260,520 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-9BE40800 3600 4000 508 $60,317 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2515-2BB40800 1800 4000 5010 $66,861 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-4BB40800 1200 4000 5810 $88,683 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-6BB40800 900 4000 5810 $120,479 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-8BE40800 720 4000 6811 $195,174 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE40800 600 4000 6811 $201,601 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-5BE40800 514 4000 6813 $254,093 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-7BE40900 3600 4000 5010 $68,741 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB40900 1800 4000 5010 $67,862 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-4BB40900 1200 4000 5810 $100,396 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-6BB40900 900 4000 5812 $136,146 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-8BE40900 720 4000 6811 $201,601 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-3BE40900 600 4000 6811 $206,296 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-5BE40TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPI ENCLOSURE-60 Hertz 4000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 2Page 8Date 06/13AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient1000 3600 4000 5010 $71,915 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB401000 1800 4000 5810 $85,177 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-4BB401000 1200 4000 5810 $120,479 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-6BE401000 900 4000 5812 $147,162 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-8BE401000 720 4000 6811 $206,296 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-3BE401000 600 4000 6813 $241,234 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-5BE401250 3600 4000 5010 $78,259 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2523-2BB401250 1800 4000 5810 $100,396 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-4BB401250 1200 4000 5812 $136,146 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-6BE401250 900 4000 6811 $187,006 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-8BE401250 720 4000 6813 $241,234 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-3BE401250 600 4000 6813 $260,520 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-5BE401500 3600 4000 5810 $98,720 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2623-2BB401500 1800 4000 5810 $103,091 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-4BB401500 1200 4000 5812 $147,162 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-6BE401500 900 4000 6811 $199,869 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-8BE401500 720 4000 6813 $260,520 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-3BE401750 3600 4000 5810 $100,282 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2623-2BB401750 1800 4000 5812 $141,893 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2634-4BB401750 1200 4000 6811 $199,869 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-6BE401750 900 4000 6813 $234,807 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-8BE401750 720 4000 6813 $264,642 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-3BE402000 3600 4000 5810 $110,041 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2623-2BB402000 1800 4000 5812 $146,796 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-4BE402000 1200 4000 6813 $228,380 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2734-6BE402000 900 4000 6813 $247,670 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-8BE402250 3600 4000 5812 $139,830 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2632-2BB402250 1800 4000 6811 $180,168 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-4BE402250 1200 4000 6813 $241,234 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2738-6BE402500 3600 4000 5812 $141,914 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2632-2BB402500 1800 4000 6811 $184,997 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-4BE402500 1200 4000 6813 $247,670 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-6BE403000 3600 4000 6811 $188,578 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2723-2BE403000 1800 4000 6813 $210,782 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2732-4BE403500 3600 4000 6813 $217,843 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2727-2BE403500 1800 4000 6813 $223,642 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-4BE404000 3600 4000 6813 $224,438 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2730-2BE404000 1800 4000 6813 $236,492 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-4BE404500 3600 4000 6813 $231,038 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2732-2BE405000 3600 4000 6813 $237,642 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2734-2BE40TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPI ENCLOSURE-60 Hertz 6600 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 2Page 9Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient300 1800 6600 508 $54,227 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB10350 1800 6600 508 $55,039 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB10350 1200 6600 588 $85,738 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB10350 900 6600 588 $82,628 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-8BB10350 720 6600 6811 $179,150 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-3BE10350 600 6600 6811 $179,150 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-5BE10400 3600 6600 508 $55,872 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB10400 1800 6600 508 $56,153 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB10400 1200 6600 588 $87,065 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB10400 900 6600 588 $83,907 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-8BB10400 720 6600 6811 $181,984 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2718-3BE10400 600 6600 6811 $185,579 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-5BE10450 3600 6600 508 $56,737 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB10450 1800 6600 5010 $63,271 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-4BB10450 1200 6600 588 $88,434 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB10450 900 6600 588 $85,738 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-8BB10450 720 6600 6811 $185,579 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-3BE10450 600 6600 6811 $188,516 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-5BE10450 514 6600 6811 $204,869 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-7BE10500 3600 6600 508 $60,232 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB10500 1800 6600 5010 $65,490 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-4BB10500 1200 6600 588 $89,847 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB10500 900 6600 5810 $107,991 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-8BB10500 720 6600 6811 $188,516 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-3BE10500 600 6600 6811 $192,009 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2723-5BE10500 514 6600 6811 $209,570 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-7BE10600 3600 6600 5010 $69,960 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB10600 1800 6600 5010 $67,171 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2523-4BB10600 1200 6600 5810 $103,210 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-6BB10600 900 6600 5810 $125,378 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2627-8BE10600 720 6600 6811 $191,547 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2721-3BE10600 600 6600 6811 $204,869 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-5BE10600 514 6600 6813 $244,508 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-7BE10700 3600 6600 5010 $71,043 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB10700 1800 6600 5010 $69,150 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2525-4BB10700 1200 6600 5810 $120,598 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2625-6BE10700 900 6600 5812 $134,921 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2630-8BE10700 720 6600 6811 $198,436 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE10700 600 6600 6811 $208,111 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-5BE10700 514 6600 6813 $257,364 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-7BE10800 3600 6600 5010 $76,177 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB10800 1800 6600 588 $82,628 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-4BB10800 1200 6600 5812 $134,921 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2630-6BE10800 900 6600 5812 $141,037 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-8BE10800 720 6600 6811 $201,576 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-3BE10800 600 6600 6811 $216,000 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2732-5BE10TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPI ENCLOSURE-60 Hertz 6600 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 2Page 10Date AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient900 3600 6600 5010 $77,356 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB10900 1800 6600 5810 $87,985 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-4BB10900 1200 6600 5812 $141,037 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-6BE10900 900 6600 6811 $183,854 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2723-8BE10900 720 6600 6811 $209,570 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-3BE10900 600 6600 6813 $244,508 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-5BE101000 3600 6600 5010 $78,572 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB101000 1800 6600 5810 $91,512 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-4BB101000 1200 6600 5812 $147,162 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2634-6BE101000 900 6600 6811 $190,283 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-8BE101000 720 6600 6813 $238,075 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2734-3BE101000 600 6600 6813 $257,364 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-5BE101250 3600 6600 5810 $99,788 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2621-2BB101250 1800 6600 5810 $103,210 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-4BB101250 1200 6600 6811 $190,283 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2725-6BE101250 900 6600 6811 $203,140 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-8BE101250 720 6600 6813 $263,791 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2743-3BE101500 3600 6600 5810 $108,361 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2623-2BB101500 1800 6600 5812 $1,76 Ball - Grease Lube Self Bi-directional CG 1RA2634-4BB101500 1200 6600 6811 $203,140 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-6BE101500 900 6600 6813 $238,075 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2736-8BE101750 3600 6600 5810 $110,076 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2623-2BB101750 1800 6600 5812 $149,068 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2634-4BB101750 1200 6600 6813 $231,651 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2734-6BE101750 900 6600 6813 $250,938 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-8BE102000 3600 6600 5812 $139,830 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2630-2BB102000 1800 6600 6811 $188,262 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2727-4BE102000 1200 6600 6813 $244,508 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2738-6BE102250 3600 6600 5812 $146,098 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG 1RA2632-2BB102250 1800 6600 6811 $200,262 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2730-4BE102250 1200 6600 6813 $250,938 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-6BE102500 3600 6600 6811 $191,942 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2723-2BE102500 1800 6600 6813 $220,483 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2734-4BE103000 3600 6600 6813 $198,099 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2725-2BE103000 1800 6600 6813 $233,343 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2738-4BE103500 3600 6600 6813 $227,808 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2730-2BE103500 1800 6600 6813 $239,773 Copper Bar Sleeve - Oil Lube Self Bi-directional CG 1RA2741-4BE104000 3600 6600 6813 $241,000 Copper Bar Sleeve - Oil Lube Self Uni-directional CG 1RA2734-2BE10TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPII ENCLOSURE-60 Hertz 460 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 3Page 1Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 3600 460 508 $50,840 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2506-2BA10200 1800 460 508 $46,254 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2507-4BA10200 1200 460 508 $47,490 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2510-6BA10200 900 460 508 $49,422 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2512-8BA10200 720 460 588 $62,161 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2612-3BA10200 600 460 588 $62,616 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2614-5BA10200 514 460 588 $100,290 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2618-7BD10200 450 460 588 $100,290 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2618-9BD10250 3600 460 508 $51,652 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2506-2BA10250 1800 460 508 $47,490 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2510-4BA10250 1200 460 508 $49,422 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2512-6BA10250 900 460 508 $51,708 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-8BA10250 720 460 588 $63,138 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2612-3BA10250 600 460 588 $74,198 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2616-5BA10250 514 460 588 $103,189 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2621-7BD10300 3600 460 508 $51,274 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BA10300 1800 460 508 $48,201 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2510-4BA10300 1200 460 508 $51,708 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-6BA10300 900 460 508 $55,552 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2518-8BA10300 720 460 588 $66,134 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2614-3BA10300 600 460 588 $82,899 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2618-5BA10300 514 460 5810 $108,960 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2623-7BD10350 3600 460 508 $52,068 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BA10350 1800 460 508 $49,422 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2512-4BA10350 1200 460 508 $53,634 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-6BA10350 900 460 508 $58,298 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2521-8BA10350 720 460 588 $74,198 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2616-3BA10350 600 460 5810 $91,573 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2623-5BA10400 3600 460 508 $53,271 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BA10400 1800 460 508 $51,708 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BA10400 1200 460 508 $54,437 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-6BA10400 900 460 5010 $66,168 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2525-8BA10400 720 460 588 $82,899 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2618-3BA10400 600 460 5810 $103,284 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-5BA10450 3600 460 508 $54,096 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BA10450 1800 460 508 $52,482 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BA10450 1200 460 5010 $62,971 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2521-6BA10450 900 460 5010 $70,295 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2530-8BA10450 720 460 588 $85,802 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-3BA10450 600 460 5810 $124,530 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2627-5BD10500 3600 460 508 $57,619 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2513-2BA10500 1800 460 508 $53,634 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-4BA10500 1200 460 5010 $66,631 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2525-6BA10500 900 460 588 $82,899 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2618-8BA10500 720 460 5810 $91,573 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2623-3BA10500 600 460 5810 $126,458 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2627-5BD10TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPII ENCLOSURE-60 Hertz 460 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 3Page 2Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient600 3600 460 508 $58,511 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2513-2BA10600 1800 460 508 $55,552 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2518-4BA10600 1200 460 5010 $68,466 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2527-6BA10600 900 460 588 $85,802 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-8BA10600 720 460 5810 $107,143 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2627-3BA10700 3600 460 508 $61,979 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2515-2BA10700 1800 460 5010 $62,971 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2521-4BA10700 1200 460 588 $82,899 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2618-6BA10700 900 460 5810 $103,284 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-8BA10800 3600 460 5010 $70,399 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2516-2BA10800 1800 460 5010 $64,799 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2523-4BA10800 1200 460 588 $85,802 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-6BA10800 900 460 5810 $107,143 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2627-8BA10TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPII ENCLOSURE-60 Hertz 2300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 3Page 3Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 3600 2300 508 $52,226 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BB50200 1800 2300 508 $48,401 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2510-4BB50200 1200 2300 508 $48,401 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2510-6BB50200 900 2300 508 $50,330 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2512-8BB50200 720 2300 588 $64,505 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2612-3BB50200 600 2300 588 $65,567 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2614-5BB50200 514 2300 588 $104,125 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2621-7BE50200 450 2300 6811 $184,648 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2718-9BE50250 3600 2300 508 $53,034 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BB50250 1800 2300 508 $49,126 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2510-4BB50250 1200 2300 508 $50,330 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2512-6BB50250 900 2300 508 $54,546 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-8BB50250 720 2300 588 $65,519 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2612-3BB50250 600 2300 588 $84,433 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2618-5BB50250 514 2300 5810 $110,838 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2623-7BE50250 450 2300 6811 $187,570 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2718-9BE50300 3600 2300 508 $53,868 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BB50300 1800 2300 508 $50,330 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2512-4BB50300 1200 2300 508 $52,617 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-6BB50300 900 2300 508 $59,218 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2521-8BB50300 720 2300 588 $67,988 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2614-3BB50300 600 2300 588 $86,738 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-5BB50300 514 2300 5810 $124,643 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2627-7BE50300 450 2300 6811 $190,585 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2718-9BE50350 3600 2300 508 $54,728 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BB50350 1800 2300 508 $52,617 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BB50350 1200 2300 508 $54,546 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-6BB50350 900 2300 5010 $69,381 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2527-8BB50350 720 2300 588 $76,265 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2616-3BB50350 600 2300 5810 $93,451 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2623-5BB50350 514 2300 6811 $184,648 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2718-7BE50350 450 2300 6811 $193,984 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-9BE50400 3600 2300 508 $55,396 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BB50400 1800 2300 508 $53,404 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BB50400 1200 2300 508 $56,475 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2518-6BB50400 900 2300 5010 $71,215 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2530-8BB50400 720 2300 588 $84,433 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2618-3BB50400 600 2300 5810 $103,677 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-5BB50400 514 2300 6811 $191,084 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-7BE50400 450 2300 6811 $197,054 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-9BE50TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPII ENCLOSURE-60 Hertz 2300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 3Page 4Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient450 3600 2300 508 $56,254 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BB50450 1800 2300 508 $54,546 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-4BB50450 1200 2300 5010 $63,888 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2521-6BB50450 900 2300 588 $84,433 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2618-8BB50450 720 2300 588 $86,738 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-3BB50450 600 2300 5810 $124,643 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2627-5BE50450 514 2300 6811 $194,108 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-7BE50450 450 2300 6811 $203,938 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-9BE50500 3600 2300 508 $57,138 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BB50500 1800 2300 508 $55,362 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-4BB50500 1200 2300 5010 $67,363 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2525-6BB50500 900 2300 588 $86,738 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-8BB50500 720 2300 5810 $93,451 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2623-3BB50500 600 2300 6811 $184,648 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2718-5BE50500 514 2300 6811 $203,938 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-7BE50500 450 2300 6811 $210,368 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-9BE50600 3600 2300 508 $58,567 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2513-2BB50600 1800 2300 508 $56,475 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2518-4BB50600 1200 2300 5010 $69,381 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2527-6BB50600 900 2300 5810 $103,677 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-8BB50600 720 2300 5810 $107,256 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2627-3BB50600 600 2300 6811 $191,084 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-5BE50600 514 2300 6811 $215,069 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-7BE50600 450 2300 6811 $221,502 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2732-9BE50700 3600 2300 508 $59,474 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2513-2BB50700 1800 2300 5010 $65,566 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2523-4BB50700 1200 2300 588 $86,738 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-6BB50700 900 2300 5810 $107,256 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2627-8BB50700 720 2300 6811 $191,084 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-3BE50700 600 2300 6811 $197,511 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2723-5BE50700 514 2300 6813 $241,324 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2734-7BE50700 450 2300 6813 $267,040 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2743-9BE50800 3600 2300 508 $62,921 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2515-2BB50800 1800 2300 5010 $69,381 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2527-4BB50800 1200 2300 588 $88,080 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-6BB50800 900 2300 5810 $124,643 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2627-8BE50800 720 2300 6811 $203,938 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-3BE50800 600 2300 6811 $210,368 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-5BE50800 514 2300 6813 $260,607 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-7BE50900 3600 2300 5010 $71,345 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2516-2BB50900 1800 2300 5010 $70,419 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2527-4BB50900 1200 2300 5810 $93,451 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2623-6BB50900 900 2300 5812 $140,308 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2632-8BE50900 720 2300 6811 $207,165 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-3BE50900 600 2300 6811 $215,069 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-5BE50900 514 2300 6813 $267,040 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2743-7BE50TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPII ENCLOSURE-60 Hertz 2300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 3Page 5Date 06/13AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient1000 3600 2300 5010 $74,524 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2518-2BB501000 1800 2300 5810 $89,412 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-4BB501000 1200 2300 5810 $124,643 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2627-6BE501000 900 2300 5812 $151,326 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2636-8BE501000 720 2300 6811 $210,368 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-3BE501000 600 2300 6813 $247,757 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2736-5BE501250 3600 2300 5010 $80,860 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2523-2BB501250 1800 2300 5810 $103,677 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-4BB501250 1200 2300 5812 $140,308 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2632-6BE501250 900 2300 6811 $195,785 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-8BE501250 720 2300 6813 $241,324 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2734-3BE501250 600 2300 6813 $267,040 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2743-5BE501500 3600 2300 5810 $101,262 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2623-2BB501500 1800 2300 5810 $107,256 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2627-4BB501500 1200 2300 5812 $151,326 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2636-6BE501500 900 2300 6811 $208,648 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-8BE501500 720 2300 6813 $260,607 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-3BE501750 3600 2300 5810 $102,864 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2623-2BB501750 1800 2300 5812 $139,942 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2632-4BB501750 1200 2300 6811 $208,648 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-6BE501750 900 2300 6813 $241,324 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2736-8BE501750 720 2300 6813 $267,040 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2743-3BE502000 3600 2300 5810 $112,665 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII 1RP2623-2BB502000 1800 2300 5812 $150,957 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2636-4BE502000 1200 2300 6813 $234,900 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2734-6BE502000 900 2300 6813 $254,184 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-8BE502250 3600 2300 5812 $132,796 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII 1RP2627-2BB502250 1800 2300 6811 $188,938 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-4BE502250 1200 2300 6813 $247,757 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2738-6BE502500 3600 2300 5812 $141,042 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII 1RP2632-2BB502500 1800 2300 6811 $193,760 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-4BE502500 1200 2300 6813 $254,184 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-6BE503000 3600 2300 6811 $197,581 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII 1RP2723-2BE503000 1800 2300 6813 $217,299 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2732-4BE503500 3600 2300 6813 $224,518 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII 1RP2727-2BE503500 1800 2300 6813 $230,153 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2736-4BE504000 3600 2300 6813 $231,115 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII 1RP2730-2BE504000 1800 2300 6813 $243,016 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-4BE504500 3600 2300 6813 $237,716 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII 1RP2732-2BE505000 3600 2300 6813 $244,323 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII 1RP2734-2BE50TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPII ENCLOSURE-60 Hertz 4000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 3Page 6Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 3600 4000 508 $53,646 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BB40200 1800 4000 508 $49,782 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2510-4BB40200 1200 4000 508 $49,782 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2510-6BB40200 900 4000 508 $53,994 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-8BB40200 720 4000 588 $65,659 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2612-3BB40200 600 4000 588 $77,332 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2616-5BB40200 514 4000 5810 $111,457 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2623-7BE40200 450 4000 6811 $185,670 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2718-9BE40250 3600 4000 508 $54,477 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BB40250 1800 4000 508 $50,527 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2510-4BB40250 1200 4000 508 $51,708 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2512-6BB40250 900 4000 508 $57,847 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2518-8BB40250 720 4000 588 $68,994 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2614-3BB40250 600 4000 588 $85,744 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2618-5BB40250 514 4000 5810 $113,183 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2623-7BE40250 450 4000 6811 $188,608 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2718-9BE40300 3600 4000 508 $55,333 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BB40300 1800 4000 508 $51,708 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2512-4BB40300 1200 4000 508 $53,994 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-6BB40300 900 4000 5010 $66,944 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2523-8BB40300 720 4000 588 $77,332 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2616-3BB40300 600 4000 588 $88,854 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-5BB40300 514 4000 6811 $185,670 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2718-7BE40300 450 4000 6811 $192,103 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-9BE40350 3600 4000 508 $56,217 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BB40350 1800 4000 508 $53,994 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BB40350 1200 4000 508 $55,926 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-6BB40350 900 4000 5010 $70,752 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2527-8BB40350 720 4000 588 $85,744 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2618-3BB40350 600 4000 5810 $94,070 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2623-5BB40350 514 4000 6811 $192,103 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-7BE40350 450 4000 6811 $195,142 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-9BE40400 3600 4000 508 $56,817 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BB40400 1800 4000 508 $54,802 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BB40400 1200 4000 508 $57,847 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2518-6BB40400 900 4000 5010 $86,611 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2530-8BE40400 720 4000 588 $88,854 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-3BB40400 600 4000 5810 $105,784 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-5BB40400 514 4000 6811 $195,142 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-7BE40400 450 4000 6811 $198,530 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2723-9BE40TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPII ENCLOSURE-60 Hertz 4000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 3Page 7Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient450 3600 4000 508 $57,697 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BB40450 1800 4000 508 $55,926 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-4BB40450 1200 4000 5010 $65,257 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2521-6BB40450 900 4000 588 $85,744 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2618-8BB40450 720 4000 5810 $94,070 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2623-3BB40450 600 4000 5810 $125,866 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2627-5BE40450 514 4000 6811 $198,530 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2723-7BE40450 450 4000 6811 $211,389 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-9BE40500 3600 4000 508 $58,604 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BB40500 1800 4000 508 $56,763 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-4BB40500 1200 4000 5010 $68,923 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2525-6BB40500 900 4000 588 $88,854 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-8BB40500 720 4000 5810 $108,479 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2627-3BB40500 600 4000 6811 $192,103 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-5BE40500 514 4000 6811 $204,963 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-7BE40500 450 4000 6811 $216,084 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-9BE40600 3600 4000 508 $59,991 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2513-2BB40600 1800 4000 508 $57,847 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2518-4BB40600 1200 4000 5010 $70,752 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2527-6BB40600 900 4000 5810 $105,784 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-8BB40600 720 4000 6811 $185,670 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2718-3BE40600 600 4000 6811 $195,142 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-5BE40600 514 4000 6811 $216,084 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-7BE40600 450 4000 6813 $251,022 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2736-9BE40700 3600 4000 508 $60,920 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2513-2BB40700 1800 4000 5010 $66,944 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2523-4BB40700 1200 4000 588 $88,854 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-6BB40700 900 4000 5810 $108,479 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2627-8BB40700 720 4000 6811 $192,103 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-3BE40700 600 4000 6811 $198,530 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2723-5BE40700 514 4000 6813 $244,595 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2734-7BE40700 450 4000 6813 $270,308 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2743-9BE40800 3600 4000 508 $64,338 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2515-2BB40800 1800 4000 5010 $70,752 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2527-4BB40800 1200 4000 5810 $94,070 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2623-6BB40800 900 4000 5810 $125,866 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2627-8BE40800 720 4000 6811 $204,963 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-3BE40800 600 4000 6811 $211,389 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-5BE40800 514 4000 6813 $263,882 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-7BE40900 3600 4000 5010 $72,762 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2516-2BB40900 1800 4000 5010 $71,811 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2527-4BB40900 1200 4000 5810 $105,784 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-6BB40900 900 4000 5812 $141,534 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2632-8BE40900 720 4000 6811 $211,389 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-3BE40900 600 4000 6811 $216,084 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-5BE40TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPII ENCLOSURE-60 Hertz 4000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 3Page 8Date 06/13AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient1000 3600 4000 5010 $75,936 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2518-2BB401000 1800 4000 5810 $90,564 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-4BB401000 1200 4000 5810 $125,866 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2627-6BE401000 900 4000 5812 $152,549 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2636-8BE401000 720 4000 6811 $216,084 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-3BE401000 600 4000 6813 $251,022 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2736-5BE401250 3600 4000 5010 $82,280 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2523-2BB401250 1800 4000 5810 $105,784 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-4BB401250 1200 4000 5812 $141,534 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2632-6BE401250 900 4000 6811 $196,794 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-8BE401250 720 4000 6813 $251,022 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2736-3BE401250 600 4000 6813 $270,308 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2743-5BE401500 3600 4000 5810 $104,224 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2623-2BB401500 1800 4000 5810 $108,479 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2627-4BB401500 1200 4000 5812 $152,549 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2636-6BE401500 900 4000 6811 $209,657 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-8BE401500 720 4000 6813 $270,308 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2743-3BE401750 3600 4000 5810 $105,873 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2623-2BB401750 1800 4000 5812 $147,280 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2634-4BB401750 1200 4000 6811 $209,657 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-6BE401750 900 4000 6813 $244,595 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2736-8BE401750 720 4000 6813 $274,585 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2743-3BE402000 3600 4000 5810 $115,723 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII 1RP2623-2BB402000 1800 4000 5812 $152,183 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2636-4BE402000 1200 4000 6813 $238,168 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2734-6BE402000 900 4000 6813 $257,458 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-8BE402250 3600 4000 5812 $145,335 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII 1RP2632-2BB402250 1800 4000 6811 $189,956 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-4BE402250 1200 4000 6813 $251,022 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2738-6BE402500 3600 4000 5812 $147,505 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII 1RP2632-2BB402500 1800 4000 6811 $194,785 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-4BE402500 1200 4000 6813 $257,458 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-6BE403000 3600 4000 6811 $198,617 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII 1RP2723-2BE403000 1800 4000 6813 $220,570 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2732-4BE403500 3600 4000 6813 $227,882 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII 1RP2727-2BE403500 1800 4000 6813 $233,430 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2736-4BE404000 3600 4000 6813 $234,476 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII 1RP2730-2BE404000 1800 4000 6813 $246,280 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-4BE404500 3600 4000 6813 $241,077 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII 1RP2732-2BE405000 3600 4000 6813 $247,681 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII 1RP2734-2BE40TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPII ENCLOSURE-60 Hertz 6600 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 3Page 9Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient300 1800 6600 508 $58,118 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BB10350 1800 6600 508 $58,988 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BB10350 1200 6600 588 $91,125 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-6BB10350 900 6600 588 $88,015 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2618-8BB10350 720 6600 6811 $188,938 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2718-3BE10350 600 6600 6811 $188,938 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2718-5BE10400 3600 6600 508 $59,893 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BB10400 1800 6600 508 $60,044 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-4BB10400 1200 6600 588 $92,536 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-6BB10400 900 6600 588 $89,378 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2618-8BB10400 720 6600 6811 $191,927 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2718-3BE10400 600 6600 6811 $195,368 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-5BE10450 3600 6600 508 $60,820 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BB10450 1800 6600 5010 $67,162 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2518-4BB10450 1200 6600 588 $93,991 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-6BB10450 900 6600 588 $91,125 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-8BB10450 720 6600 6811 $195,368 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-3BE10450 600 6600 6811 $198,459 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-5BE10450 514 6600 6811 $214,657 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-7BE10500 3600 6600 508 $64,253 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2513-2BB10500 1800 6600 5010 $69,381 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2521-4BB10500 1200 6600 588 $95,492 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-6BB10500 900 6600 5810 $113,378 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2627-8BB10500 720 6600 6811 $198,459 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-3BE10500 600 6600 6811 $201,798 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2723-5BE10500 514 6600 6811 $219,358 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-7BE10600 3600 6600 5010 $73,982 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2516-2BB10600 1800 6600 5010 $71,062 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2523-4BB10600 1200 6600 5810 $108,598 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-6BB10600 900 6600 5810 $130,765 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2627-8BE10600 720 6600 6811 $201,650 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2721-3BE10600 600 6600 6811 $214,657 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-5BE10600 514 6600 6813 $254,296 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2736-7BE10700 3600 6600 5010 $75,127 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2516-2BB10700 1800 6600 5010 $73,041 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2525-4BB10700 1200 6600 5810 $125,985 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2625-6BE10700 900 6600 5812 $140,308 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2630-8BE10700 720 6600 6811 $208,224 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-3BE10700 600 6600 6811 $218,054 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-5BE10700 514 6600 6813 $267,153 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-7BE10800 3600 6600 5010 $80,198 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2518-2BB10800 1800 6600 588 $88,015 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2618-4BB10800 1200 6600 5812 $140,308 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2630-6BE10800 900 6600 5812 $146,424 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2632-8BE10800 720 6600 6811 $211,519 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-3BE10800 600 6600 6811 $225,788 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2732-5BE10TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPII ENCLOSURE-60 Hertz 6600 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 3Page 10Date 06/13AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient900 3600 6600 5010 $81,440 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2518-2BB10900 1800 6600 5810 $93,372 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-4BB10900 1200 6600 5812 $146,424 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2632-6BE10900 900 6600 6811 $193,642 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2723-8BE10900 720 6600 6811 $219,358 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-3BE10900 600 6600 6813 $254,296 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2736-5BE101000 3600 6600 5010 $82,720 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2518-2BB101000 1800 6600 5810 $96,899 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2623-4BB101000 1200 6600 5812 $152,549 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2634-6BE101000 900 6600 6811 $200,072 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-8BE101000 720 6600 6813 $247,863 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2734-3BE101000 600 6600 6813 $267,153 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-5BE101250 3600 6600 5810 $105,293 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2621-2BB101250 1800 6600 5810 $108,598 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-4BB101250 1200 6600 6811 $200,072 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2725-6BE101250 900 6600 6811 $212,928 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-8BE101250 720 6600 6813 $273,579 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2743-3BE101500 3600 6600 5810 $113,866 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2623-2BB101500 1800 6600 5812 $152,183 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2634-4BB101500 1200 6600 6811 $212,928 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-6BE101500 900 6600 6813 $247,863 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2736-8BE101750 3600 6600 5810 $115,668 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2623-2BB101750 1800 6600 5812 $154,539 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2634-4BB101750 1200 6600 6813 $241,439 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2734-6BE101750 900 6600 6813 $260,726 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-8BE102000 3600 6600 5812 $145,335 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII 1RP2630-2BB102000 1800 6600 6811 $198,050 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2727-4BE102000 1200 6600 6813 $254,296 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2738-6BE102250 3600 6600 5812 $151,603 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII 1RP2632-2BB102250 1800 6600 6811 $210,050 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2730-4BE102250 1200 6600 6813 $260,726 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-6BE102500 3600 6600 6811 $201,981 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII 1RP2723-2BE102500 1800 6600 6813 $230,271 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2734-4BE103000 3600 6600 6813 $208,137 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII 1RP2725-2BE103000 1800 6600 6813 $243,131 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2738-4BE103500 3600 6600 6813 $237,847 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII 1RP2730-2BE103500 1800 6600 6813 $249,561 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII 1RP2741-4BE104000 3600 6600 6813 $251,038 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII 1RP2734-2BE10TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEWAC ENCLOSURE-60 Hertz 460 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 4Page 1Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 720 460 588 $110,588 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2612-3BA10200 600 460 588 $110,305 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2614-5BA10200 514 460 588 $147,979 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2618-7BD10200 450 460 588 $147,979 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2618-9BD10250 720 460 588 $112,327 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2612-3BA10250 600 460 588 $121,887 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2616-5BA10250 514 460 588 $150,878 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2621-7BD10300 720 460 588 $113,823 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2614-3BA10300 600 460 588 $130,588 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-5BA10300 514 460 5810 $156,649 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2623-7BD10350 720 460 588 $121,887 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2616-3BA10350 600 460 5810 $139,262 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2623-5BA10400 720 460 588 $130,588 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-3BA10400 600 460 5810 $150,973 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-5BA10450 720 460 588 $133,491 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-3BA10450 600 460 5810 $172,220 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2627-5BD10500 900 460 588 $130,588 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-8BA10500 720 460 5810 $139,262 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2623-3BA10500 600 460 5810 $174,885 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2627-5BD10600 900 460 588 $133,491 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-8BA10600 720 460 5810 $154,832 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2627-3BA10700 1200 460 588 $130,588 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-6BA10700 900 460 5810 $150,973 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-8BA10800 1200 460 588 $133,491 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-6BA10800 900 460 5810 $154,832 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2627-8BA10TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEWAC ENCLOSURE-60 Hertz 2300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 4Page 2Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 720 2300 588 $112,932 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2612-3BB50200 600 2300 588 $113,256 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2614-5BB50200 514 2300 588 $151,814 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2621-7BE50200 450 2300 6811 $258,140 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2718-9BE50250 720 2300 588 $114,708 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2612-3BB50250 600 2300 588 $132,122 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-5BB50250 514 2300 5810 $158,527 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2623-7BE50250 450 2300 6811 $262,225 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2718-9BE50300 720 2300 588 $115,677 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2614-3BB50300 600 2300 588 $134,427 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-5BB50300 514 2300 5810 $172,332 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2627-7BE50300 450 2300 6811 $266,441 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2718-9BE50350 720 2300 588 $123,954 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2616-3BB50350 600 2300 5810 $141,140 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2623-5BB50350 514 2300 6811 $258,140 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2718-7BE50350 450 2300 6811 $267,477 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-9BE50400 720 2300 588 $132,122 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-3BB50400 600 2300 5810 $151,366 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-5BB50400 514 2300 6811 $264,576 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-7BE50400 450 2300 6811 $271,709 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-9BE50450 900 2300 588 $132,122 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-8BB50450 720 2300 588 $134,427 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-3BB50450 600 2300 5810 $172,332 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2627-5BE50450 514 2300 6811 $268,763 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-7BE50450 450 2300 6811 $277,430 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-9BE50500 900 2300 588 $134,427 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-8BB50500 720 2300 5810 $141,140 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2623-3BB50500 600 2300 6811 $258,140 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2718-5BE50500 514 2300 6811 $277,430 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-7BE50500 450 2300 6811 $283,860 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-9BE50600 900 2300 5810 $151,366 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-8BB50600 720 2300 5810 $154,945 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2627-3BB50600 600 2300 6811 $264,576 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-5BE50600 514 2300 6811 $288,561 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-7BE50600 450 2300 6811 $294,994 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2732-9BE50700 1200 2300 588 $134,427 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-6BB50700 900 2300 5810 $154,945 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2627-8BB50700 720 2300 6811 $264,576 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-3BE50700 600 2300 6811 $271,003 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2723-5BE50700 514 2300 6813 $314,816 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2734-7BE50700 450 2300 6813 $340,533 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2743-9BE50800 1200 2300 588 $136,508 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-6BB50800 900 2300 5810 $172,332 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2627-8BE50800 720 2300 6811 $277,430 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-3BE50800 600 2300 6811 $283,860 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-5BE50800 514 2300 6813 $334,100 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-7BE50TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEWAC ENCLOSURE-60 Hertz 2300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 4Page 3Date 06/13AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient900 1200 2300 5810 $141,140 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2623-6BB50900 900 2300 5812 $187,997 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2632-8BE50900 720 2300 6811 $281,820 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-3BE50900 600 2300 6811 $288,561 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-5BE50900 514 2300 6813 $340,533 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2743-7BE501000 1800 2300 5810 $137,101 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-4BB501000 1200 2300 5810 $172,332 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2627-6BE501000 900 2300 5812 $199,015 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2636-8BE501000 720 2300 6811 $283,860 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-3BE501000 600 2300 6813 $321,249 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-5BE501250 1800 2300 5810 $151,366 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-4BB501250 1200 2300 5812 $187,997 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2632-6BE501250 900 2300 6811 $269,277 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-8BE501250 720 2300 6813 $314,816 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2734-3BE501250 600 2300 6813 $340,533 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2743-5BE501500 3600 2300 5810 $149,991 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2623-2BB501500 1800 2300 5810 $154,945 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2627-4BB501500 1200 2300 5812 $199,015 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2636-6BE501500 900 2300 6811 $282,140 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-8BE501500 720 2300 6813 $334,100 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-3BE501750 3600 2300 5810 $152,364 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2623-2BB501750 1800 2300 5812 $187,631 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2632-4BB501750 1200 2300 6811 $282,140 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-6BE501750 900 2300 6813 $314,816 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-8BE501750 720 2300 6813 $340,533 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2743-3BE502000 3600 2300 5810 $162,961 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGG 1RN2623-2BB502000 1800 2300 5812 $198,646 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2636-4BE502000 1200 2300 6813 $308,393 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2734-6BE502000 900 2300 6813 $327,676 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-8BE502250 3600 2300 5812 $181,525 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGG 1RN2627-2BB502250 1800 2300 6811 $262,430 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-4BE502250 1200 2300 6813 $321,249 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2738-6BE502500 3600 2300 5812 $189,771 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGG 1RN2632-2BB502500 1800 2300 6811 $267,252 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-4BE502500 1200 2300 6813 $327,676 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-6BE503000 3600 2300 6811 $272,952 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2723-2BE503000 1800 2300 6813 $290,791 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2732-4BE503500 3600 2300 6813 $299,888 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2727-2BE503500 1800 2300 6813 $303,645 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-4BE504000 3600 2300 6813 $306,486 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2730-2BE504000 1800 2300 6813 $316,508 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-4BE504500 3600 2300 6813 $313,086 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2732-2BE505000 3600 2300 6813 $319,693 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2734-2BE50TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEWAC ENCLOSURE-60 Hertz 4000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 4Page 4Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 720 4000 588 $113,348 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2612-3BB40200 600 4000 588 $125,021 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2616-5BB40200 514 4000 5810 $159,146 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2623-7BE40200 450 4000 6811 $259,162 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2718-9BE40250 720 4000 588 $116,683 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2614-3BB40250 600 4000 588 $133,433 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-5BB40250 514 4000 5810 $161,610 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2623-7BE40250 450 4000 6811 $263,263 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2718-9BE40300 720 4000 588 $125,021 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2616-3BB40300 600 4000 588 $136,543 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-5BB40300 514 4000 6811 $259,162 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2718-7BE40300 450 4000 6811 $265,595 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-9BE40350 720 4000 588 $133,433 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-3BB40350 600 4000 5810 $141,759 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2623-5BB40350 514 4000 6811 $265,595 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-7BE40350 450 4000 6811 $269,797 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-9BE40400 720 4000 588 $136,543 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-3BB40400 600 4000 5810 $153,473 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-5BB40400 514 4000 6811 $269,797 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-7BE40400 450 4000 6811 $272,022 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2723-9BE40450 900 4000 588 $133,433 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-8BB40450 720 4000 5810 $141,759 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2623-3BB40450 600 4000 5810 $173,555 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2627-5BE40450 514 4000 6811 $272,022 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2723-7BE40450 450 4000 6811 $284,882 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-9BE40500 900 4000 588 $136,543 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-8BB40500 720 4000 5810 $156,168 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2627-3BB40500 600 4000 6811 $265,595 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-5BE40500 514 4000 6811 $278,455 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-7BE40500 450 4000 6811 $289,576 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-9BE40600 900 4000 5810 $153,473 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-8BB40600 720 4000 6811 $259,162 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2718-3BE40600 600 4000 6811 $269,797 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-5BE40600 514 4000 6811 $289,576 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-7BE40600 450 4000 6813 $324,514 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-9BE40700 1200 4000 588 $136,543 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-6BB40700 900 4000 5810 $156,168 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2627-8BB40700 720 4000 6811 $265,595 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-3BE40700 600 4000 6811 $272,022 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2723-5BE40700 514 4000 6813 $318,087 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2734-7BE40700 450 4000 6813 $343,801 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2743-9BE40800 1200 4000 5810 $141,759 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2623-6BB40800 900 4000 5810 $173,555 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2627-8BE40800 720 4000 6811 $278,455 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-3BE40800 600 4000 6811 $284,882 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-5BE40800 514 4000 6813 $337,374 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-7BE40TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEWAC ENCLOSURE-60 Hertz 4000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 4Page 5Date 06/13AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient900 1200 4000 5810 $153,473 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-6BB40900 900 4000 5812 $189,223 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2632-8BE40900 720 4000 6811 $284,882 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-3BE40900 600 4000 6811 $289,576 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-5BE401000 1800 4000 5810 $138,253 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-4BB401000 1200 4000 5810 $173,555 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2627-6BE401000 900 4000 5812 $200,238 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2636-8BE401000 720 4000 6811 $289,576 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-3BE401000 600 4000 6813 $324,514 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-5BE401250 1800 4000 5810 $153,473 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-4BB401250 1200 4000 5812 $189,223 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2632-6BE401250 900 4000 6811 $270,287 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-8BE401250 720 4000 6813 $324,514 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-3BE401250 600 4000 6813 $343,801 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2743-5BE401500 3600 4000 5810 $152,953 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2623-2BB401500 1800 4000 5810 $156,168 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2627-4BB401500 1200 4000 5812 $200,238 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2636-6BE401500 900 4000 6811 $283,150 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-8BE401500 720 4000 6813 $343,801 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2743-3BE401750 3600 4000 5810 $155,373 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2623-2BB401750 1800 4000 5812 $194,970 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2634-4BB401750 1200 4000 6811 $283,150 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-6BE401750 900 4000 6813 $318,087 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-8BE401750 720 4000 6813 $349,241 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2743-3BE402000 3600 4000 5810 $166,019 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGG 1RN2623-2BB402000 1800 4000 5812 $199,872 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2636-4BE402000 1200 4000 6813 $311,660 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2734-6BE402000 900 4000 6813 $330,950 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-8BE402250 3600 4000 5812 $194,064 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGG 1RN2632-2BB402250 1800 4000 6811 $263,449 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-4BE402250 1200 4000 6813 $324,514 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2738-6BE402500 3600 4000 5812 $197,005 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGG 1RN2632-2BB402500 1800 4000 6811 $268,277 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-4BE402500 1200 4000 6813 $330,950 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-6BE403000 3600 4000 6811 $273,987 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2723-2BE403000 1800 4000 6813 $294,062 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2732-4BE403500 3600 4000 6813 $303,252 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2727-2BE403500 1800 4000 6813 $306,922 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-4BE404000 3600 4000 6813 $309,847 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2730-2BE404000 1800 4000 6813 $319,773 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-4BE404500 3600 4000 6813 $316,447 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2732-2BE405000 3600 4000 6813 $323,051 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2734-2BE40TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEWAC ENCLOSURE-60 Hertz 6600 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 4Page 6Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient350 1200 6600 588 $138,814 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-6BB10350 900 6600 588 $135,704 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-8BB10350 720 6600 6811 $262,430 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2718-3BE10350 600 6600 6811 $262,430 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2718-5BE10400 1200 6600 588 $140,963 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-6BB10400 900 6600 588 $137,805 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-8BB10400 720 6600 6811 $266,582 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2718-3BE10400 600 6600 6811 $268,860 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-5BE10450 1200 6600 588 $143,179 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-6BB10450 900 6600 588 $138,814 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-8BB10450 720 6600 6811 $268,860 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-3BE10450 600 6600 6811 $273,114 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-5BE10450 514 6600 6811 $288,150 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-7BE10500 1200 6600 588 $145,466 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-6BB10500 900 6600 5810 $161,067 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2627-8BB10500 720 6600 6811 $273,114 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-3BE10500 600 6600 6811 $275,290 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2723-5BE10500 514 6600 6811 $292,850 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-7BE10600 1200 6600 5810 $156,287 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-6BB10600 900 6600 5810 $178,454 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2627-8BE10600 720 6600 6811 $277,505 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2721-3BE10600 600 6600 6811 $288,150 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-5BE10600 514 6600 6813 $327,788 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-7BE10700 1200 6600 5810 $173,674 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2625-6BE10700 900 6600 5812 $187,997 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2630-8BE10700 720 6600 6811 $281,717 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-3BE10700 600 6600 6811 $292,709 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-5BE10700 514 6600 6813 $340,645 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-7BE10800 1800 6600 588 $135,704 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-4BB10800 1200 6600 5812 $187,997 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2630-6BE10800 900 6600 5812 $194,113 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2632-8BE10800 720 6600 6811 $286,174 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-3BE10800 600 6600 6811 $299,280 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2732-5BE10900 1800 6600 5810 $141,061 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-4BB10900 1200 6600 5812 $194,113 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2632-6BE10900 900 6600 6811 $267,134 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2723-8BE10900 720 6600 6811 $292,850 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-3BE10900 600 6600 6813 $327,788 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-5BE101000 1800 6600 5810 $144,588 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2623-4BB101000 1200 6600 5812 $200,238 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2634-6BE101000 900 6600 6811 $273,564 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-8BE101000 720 6600 6813 $321,355 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2734-3BE101000 600 6600 6813 $340,645 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-5BE10TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEWAC ENCLOSURE-60 Hertz 6600 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 4Page 7Date 06/13AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient1250 3600 6600 5810 $154,022 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2621-2BB101250 1800 6600 5810 $156,287 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-4BB101250 1200 6600 6811 $273,564 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2725-6BE101250 900 6600 6811 $286,421 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-8BE101250 720 6600 6813 $347,072 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2743-3BE101500 3600 6600 5810 $162,595 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2623-2BB101500 1800 6600 5812 $199,872 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2634-4BB101500 1200 6600 6811 $286,421 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-6BE101500 900 6600 6813 $321,355 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2736-8BE101750 3600 6600 5810 $165,168 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2623-2BB101750 1800 6600 5812 $202,966 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2634-4BB101750 1200 6600 6813 $314,931 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2734-6BE101750 900 6600 6813 $334,218 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-8BE102000 3600 6600 5812 $194,064 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGG 1RN2630-2BB102000 1800 6600 6811 $271,542 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2727-4BE102000 1200 6600 6813 $327,788 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2738-6BE102250 3600 6600 5812 $200,332 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGG 1RN2632-2BB102250 1800 6600 6811 $283,542 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2730-4BE102250 1200 6600 6813 $334,218 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-6BE102500 3600 6600 6811 $277,351 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2723-2BE102500 1800 6600 6813 $303,763 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2734-4BE103000 3600 6600 6813 $283,508 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2725-2BE103000 1800 6600 6813 $316,623 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2738-4BE103500 3600 6600 6813 $313,217 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2730-2BE103500 1800 6600 6813 $323,053 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG 1RN2741-4BE104000 3600 6600 6813 $326,409 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG 1RN2734-2BE10TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEFC ENCLOSURE-60 Hertz 460 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 5Page 1Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 900 460 509 $55,670 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-8LA10200 720 460 588 $77,413 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2621-3LA10200 600 460 588 $77,413 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2621-5LA10250 1800 460 509 $49,844 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2514-4LA10250 1200 460 509 $52,436 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2518-6LA10250 900 460 5011 $62,695 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2525-8LA10250 720 460 588 $78,923 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2623-3LA10250 600 460 5810 $88,118 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2625-5LA10300 3600 460 509 $53,611 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2514-2LA10300 1800 460 509 $51,735 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2516-4LA10300 1200 460 509 $54,427 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-6LA10300 900 460 5013 $78,968 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2532-8LA10300 720 460 588 $80,105 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2623-3LA10300 600 460 5810 $113,174 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2630-5NA10350 3600 460 509 $55,651 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2516-2LA10350 1800 460 509 $52,554 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2516-4LA10350 1200 460 5011 $62,695 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2525-6LA10350 900 460 5013 $84,265 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2537-8LA10350 720 460 5810 $93,973 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2627-3LA10350 600 460 SH400 $142,978 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2725-5NA10400 3600 460 509 $56,532 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2516-2LA10400 1800 460 5011 $55,236 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2518-4LA10400 1200 460 5011 $64,683 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2527-6LA10400 900 460 588 $78,923 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2623-8LA10400 720 460 SH400 $139,681 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2723-3NA10400 600 460 SH400 $149,588 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2730-5NA10450 3600 460 509 $57,685 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2518-2LA10450 1800 460 5011 $57,012 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-4LA10450 1200 460 5013 $78,968 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2532-6LA10450 900 460 5810 $93,973 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2627-8LA10450 720 460 SH400 $146,288 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2727-3NA10450 600 460 SH400 $152,888 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2732-5NA10500 3600 460 5011 $64,336 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2521-2LA10500 1800 460 5011 $57,865 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-4LA10500 1200 460 588 $78,923 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2623-6LA10500 900 460 5812 $129,298 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2634-8NA10500 720 460 SH400 $149,588 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2730-3NA10500 600 460 SH400 $157,847 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2735-5NA10600 3600 460 5011 $68,411 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2525-2LA10600 1800 460 5011 $60,596 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2525-4LA10600 1200 460 5810 $93,973 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2627-6LA10600 900 460 5812 $140,920 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2641-8NA10600 720 460 SH450 $194,442 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2830-3NA10600 600 460 SH450 $201,882 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2834-5NA10TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEFC ENCLOSURE-60 Hertz 460 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 5Page 2Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient700 3600 460 5013 $84,539 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2530-2LA10700 1800 460 5013 $78,968 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2532-4LA10700 1200 460 5812 $133,177 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2636-6NA10700 900 460 SH400 $146,288 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2727-8NA10700 720 460 SH450 $201,882 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2834-3NA10700 600 460 SH450 $209,567 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2838-5NA10800 1800 460 5013 $96,168 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2535-4NA10800 1200 460 SH400 $142,978 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2725-6NA10800 900 460 SH450 $194,442 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2830-8NA10800 720 460 SH450 $209,567 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2838-3NA10800 600 460 880 $277,207 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2132-5NA10TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEFC ENCLOSURE-60 Hertz 2300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 5Page 3Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 3600 2300 509 $52,548 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2512-2LN20200 1800 2300 509 $49,687 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2512-4LN20200 1200 2300 509 $51,527 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2516-6LN20200 900 2300 509 $56,642 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-8LN20200 720 2300 588 $82,847 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2616-3LN20200 600 2300 5810 $92,885 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2625-5LN20250 3600 2300 509 $54,579 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2514-2LN20250 1800 2300 509 $50,816 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2514-4LN20250 1200 2300 509 $53,381 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2518-6LN20250 900 2300 5011 $65,628 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2527-8LN20250 720 2300 588 $84,528 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2623-3LN20250 600 2300 5810 $96,982 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2627-5LN20300 3600 2300 509 $55,443 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2514-2LN20300 1800 2300 509 $52,707 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2516-4LN20300 1200 2300 509 $55,378 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-6LN20300 900 2300 5013 $79,979 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2532-8LN20300 720 2300 5810 $92,885 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2625-3LN20300 600 2300 SH400 $144,744 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2725-5NN20350 3600 2300 509 $56,617 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2516-2LN20350 1800 2300 509 $53,541 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2516-4LN20350 1200 2300 5011 $63,637 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2525-6LN20350 900 2300 5013 $85,277 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2537-8LN20350 720 2300 5810 $100,504 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2630-3LN20350 600 2300 SH400 $151,348 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2730-5NN20400 3600 2300 509 $57,513 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2516-2LN20400 1800 2300 5011 $56,150 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2518-4LN20400 1200 2300 5011 $65,628 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2527-6LN20400 900 2300 5810 $96,982 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2627-8LN20400 720 2300 SH400 $144,744 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2725-3NN20400 600 2300 SH400 $154,649 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2732-5NN20450 3600 2300 509 $58,651 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2518-2LN20450 1800 2300 5011 $57,929 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-4LN20450 1200 2300 5013 $79,979 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2532-6LN20450 900 2300 5810 $98,434 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2627-8LN20450 720 2300 SH400 $151,348 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2730-3NN20450 600 2300 SH450 $200,040 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2832-5NN20500 3600 2300 5011 $65,305 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2521-2LN20500 1800 2300 5011 $58,796 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-4LN20500 1200 2300 5013 $85,277 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2537-6LN20500 900 2300 5812 $128,156 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2632-8NN20500 720 2300 SH400 $154,649 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2732-3NN20500 600 2300 SH450 $207,595 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2836-5NN20TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEFC ENCLOSURE-60 Hertz 2300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 5Page 4Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient600 3600 2300 5011 $69,380 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2525-2LN20600 1800 2300 5011 $61,510 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2525-4LN20600 1200 2300 5810 $96,982 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2627-6LN20600 900 2300 5812 $143,667 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2641-8NN20600 720 2300 SH450 $200,040 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2832-3NN20600 600 2300 SH450 $211,380 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2838-5NN20700 3600 2300 5013 $85,604 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2530-2LN20700 1800 2300 5013 $77,853 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2530-4LN20700 1200 2300 5812 $135,906 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2636-6NN20700 900 2300 SH400 $148,051 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2727-8NN20700 720 2300 SH450 $207,595 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2836-3NN20700 600 2300 880 $273,796 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2130-5NN20800 3600 2300 5013 $90,087 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2534-2LN20800 1800 2300 5013 $83,156 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2535-4LN20800 1200 2300 5812 $143,667 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2641-6NN20800 900 2300 SH400 $151,348 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2730-8NN20800 720 2300 880 $268,399 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2127-3NN20800 600 2300 880 $284,117 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2134-5NN20900 3600 2300 5810 $129,368 Copper Bar Ball - Grease Lube Self Uni-directional CZ 1LA2627-2NN20900 1800 2300 5810 $117,333 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2630-4NN20900 1200 2300 SH400 $151,348 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2730-6NN20900 900 2300 SH450 $203,816 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2834-8NN20900 720 2300 880 $278,946 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2132-3NN20900 600 2300 880 $294,426 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2138-5NN201000 3600 2300 5812 $164,511 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CZ 1LA2636-2NN201000 1800 2300 5812 $128,156 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2632-4NN201000 1200 2300 SH450 $196,259 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2830-6NN201000 900 2300 SH450 $211,380 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2838-8NN201000 720 2300 880 $284,117 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2134-3NN201000 600 2300 880 $299,577 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2141-5NN201250 3600 2300 SH450 $204,687 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ 1LA2827-2NN201250 1800 2300 SH450 $196,259 Copper Bar Ball - Grease Lube Self Uni-directional CGZ 1LA2830-4NN201250 1200 2300 SH450 $199,364 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2830-6NN201250 900 2300 880 $284,117 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2134-8NN201250 720 2300 880 $299,577 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2141-3NN201500 3600 2300 880 $299,029 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ 1LA2127-2NN201500 1800 2300 SH450 $199,364 Copper Bar Ball - Grease Lube Self Uni-directional CGZ 1LA2830-4NN201500 1200 2300 SH450 $211,380 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2838-6NN201500 900 2300 880 $299,577 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2141-8NN201500 720 2300 SH564 $434,262 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4564-3NN201750 3600 2300 880 $305,029 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ 1LA2130-2NN201750 1800 2300 SH450 $200,040 Copper Bar Ball - Grease Lube Self Uni-directional CGZ 1LA2832-4NN201750 1200 2300 880 $284,117 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2134-6NN201750 900 2300 SH562 $363,234 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4562-8NN20TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEFC ENCLOSURE-60 Hertz 2300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 5Page 5Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient2000 3600 2300 880 $316,527 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ 1LA2134-2NN202000 1800 2300 880 $278,946 Copper Bar Ball - Grease Lube Self Uni-directional CGZ 1LA2132-4NN202000 1200 2300 SH560 $330,065 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4560-6NN202000 900 2300 SH564 $394,783 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4564-8NN202250 3600 2300 SH560 $335,730 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional 1LA4 1LA4560-2NN202250 1800 2300 880 $294,426 Copper Bar Ball - Grease Lube Self Uni-directional CGZ 1LA2138-4NN202250 1200 2300 SH562 $355,145 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4562-6NN202500 3600 2300 SH562 $359,998 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional 1LA4 1LA4562-2NN202500 1800 2300 SH562 $303,370 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4562-4NN202500 1200 2300 SH564 $379,413 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4564-6NN203000 1800 2300 SH564 $340,583 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4564-4NN20TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEFC ENCLOSURE-60 Hertz 4000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 5Page 6Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 1800 4000 509 $50,371 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2512-4LN50200 1200 4000 509 $52,951 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2516-6LN50200 900 4000 509 $58,100 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-8LN50200 720 4000 588 $85,392 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2623-3LN50200 600 4000 5810 $94,469 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2625-5LN50250 3600 4000 509 $56,040 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2514-2LN50250 1800 4000 509 $52,271 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2514-4LN50250 1200 4000 509 $54,808 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2518-6LN50250 900 4000 5011 $67,052 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2527-8LN50250 720 4000 588 $86,671 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2623-3LN50250 600 4000 5810 $102,097 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2630-5LN50300 3600 4000 509 $56,927 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2514-2LN50300 1800 4000 509 $54,162 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2516-4LN50300 1200 4000 509 $56,799 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-6LN50300 900 4000 5013 $81,493 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2532-8LN50300 720 4000 5810 $98,150 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2627-3LN50300 600 4000 SH400 $149,808 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2727-5NN50350 3600 4000 509 $58,069 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2516-2LN50350 1800 4000 509 $55,019 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2516-4LN50350 1200 4000 5011 $65,064 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2525-6LN50350 900 4000 5013 $86,788 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2537-8LN50350 720 4000 SH400 $146,502 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2725-3NN50350 600 4000 SH400 $161,371 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2735-5NN50400 3600 4000 509 $58,987 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2516-2LN50400 1800 4000 5011 $57,525 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2518-4LN50400 1200 4000 5011 $67,052 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2527-6LN50400 900 4000 5810 $98,150 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2627-8LN50400 720 4000 SH400 $153,105 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2730-3NN50400 600 4000 SH450 $198,075 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2830-5NN50450 3600 4000 509 $60,109 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2518-2LN50450 1800 4000 5011 $59,313 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-4LN50450 1200 4000 5013 $81,493 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2532-6LN50450 900 4000 5810 $102,097 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2630-8LN50450 720 4000 SH400 $156,415 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2732-3NN50450 600 4000 SH450 $205,636 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2834-5NN50500 3600 4000 5011 $66,763 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2521-2LN50500 1800 4000 5011 $60,201 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-4LN50500 1200 4000 5013 $86,788 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2537-6LN50500 900 4000 5812 $137,271 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2636-8NN50500 720 4000 SH400 $161,371 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2735-3NN50500 600 4000 SH450 $209,411 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2836-5NN50TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEFC ENCLOSURE-60 Hertz 4000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 5Page 7Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient600 3600 4000 5011 $70,829 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2525-2LN50600 1800 4000 5011 $62,891 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2525-4LN50600 1200 4000 5810 $102,097 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2630-6LN50600 900 4000 5812 $145,029 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2641-8NN50600 720 4000 SH450 $205,636 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2834-3NN50600 600 4000 880 $261,823 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2125-5NN50700 3600 4000 5013 $87,215 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2530-2LN50700 1800 4000 5013 $79,378 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2530-4LN50700 1200 4000 5812 $137,271 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2636-6NN50700 900 4000 SH400 $149,808 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2727-8NN50700 720 4000 SH450 $213,196 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2838-3NN50700 600 4000 880 $275,538 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2130-5NN50800 3600 4000 5013 $91,695 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2534-2LN50800 1800 4000 5013 $84,664 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2535-4LN50800 1200 4000 5812 $145,029 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2641-6NN50800 900 4000 SH400 $161,371 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2735-8NN50800 720 4000 880 $275,538 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2130-3NN50800 600 4000 880 $285,853 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2134-5NN50900 3600 4000 5810 $131,112 Copper Bar Ball - Grease Lube Self Uni-directional CZ 1LA2627-2NN50900 1800 4000 5810 $118,920 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2630-4NN50900 1200 4000 SH400 $161,371 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2735-6NN50900 900 4000 SH450 $205,636 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2834-8NN50900 720 4000 880 $285,853 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2134-3NN50900 600 4000 880 $296,174 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2138-5NN501000 3600 4000 5812 $166,078 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CZ 1LA2636-2NN501000 1800 4000 5812 $141,156 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2638-4NN501000 1200 4000 SH450 $198,075 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2830-6NN501000 900 4000 SH450 $213,196 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2838-8NN501000 720 4000 880 $296,174 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2138-3NN501000 600 4000 880 $301,324 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2141-5NN501250 3600 4000 SH450 $206,639 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ 1LA2827-2NN501250 1800 4000 SH450 $198,075 Copper Bar Ball - Grease Lube Self Uni-directional CGZ 1LA2830-4NN501250 1200 4000 SH450 $201,209 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2830-6NN501250 900 4000 880 $285,853 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2134-8NN501250 720 4000 880 $301,324 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2141-3NN501500 3600 4000 880 $301,649 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ 1LA2127-2NN501500 1800 4000 SH450 $201,209 Copper Bar Ball - Grease Lube Self Uni-directional CGZ 1LA2830-4NN501500 1200 4000 SH450 $213,196 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2838-6NN501500 900 4000 880 $301,324 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2141-8NN501500 720 4000 SH564 $438,648 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4564-3NN501750 3600 4000 880 $306,974 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ 1LA2130-2NN501750 1800 4000 SH450 $201,857 Copper Bar Ball - Grease Lube Self Uni-directional CGZ 1LA2832-4NN501750 1200 4000 880 $285,853 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2134-6NN501750 900 4000 SH562 $366,903 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4562-8NN50TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEFC ENCLOSURE-60 Hertz 4000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 5Page 8Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient2000 3600 4000 880 $318,466 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ 1LA2134-2NN502000 1800 4000 880 $280,694 Copper Bar Ball - Grease Lube Self Uni-directional CGZ 1LA2132-4NN502000 1200 4000 SH560 $333,399 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4560-6NN502000 900 4000 SH564 $398,771 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4564-8NN502250 3600 4000 SH560 $339,121 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional 1LA4 1LA4560-2NN502250 1800 4000 880 $296,174 Copper Bar Ball - Grease Lube Self Uni-directional CGZ 1LA2138-4NN502250 1200 4000 SH562 $358,732 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4562-6NN502500 3600 4000 SH562 $363,635 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional 1LA4 1LA4562-2NN502500 1800 4000 SH562 $306,434 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4562-4NN502500 1200 4000 SH564 $383,246 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4564-6NN503000 3600 4000 SH564 $411,846 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional 1LA4 1LA4564-2NN503000 1800 4000 SH564 $344,023 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4564-4NN50TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEFC ENCLOSURE-60 Hertz 6600 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 5Page 9Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient250 1200 6600 588 $90,212 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2621-6LN10250 900 6600 5810 $97,664 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2625-8LN10250 720 6600 SH450 $191,277 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2825-3NN10300 3600 6600 509 $60,405 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2514-2LN10300 1800 6600 5011 $60,277 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2518-4LN10300 1200 6600 5810 $97,664 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2625-6LN10300 900 6600 5810 $101,171 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2627-8LN10300 720 6600 SH450 $194,304 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2825-3NN10350 3600 6600 509 $62,433 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2516-2LN10350 1800 6600 5011 $62,056 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-4LN10350 1200 6600 5810 $101,171 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2627-6LN10350 900 6600 5810 $105,112 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2630-8LN10350 720 6600 SH450 $197,428 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2825-3NN10350 600 6600 SH450 $210,632 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2834-5NN10400 3600 6600 5011 $69,670 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2521-2LN10400 1800 6600 5011 $63,853 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2523-4LN10400 1200 6600 5810 $105,112 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2630-6LN10400 900 6600 5810 $121,938 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2630-8NN10400 720 6600 SH450 $203,069 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2830-3NN10400 600 6600 SH450 $218,187 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2838-5NN10450 3600 6600 5011 $73,745 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2525-2LN10450 1800 6600 5011 $64,808 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2523-4LN10450 1200 6600 5810 $121,938 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2630-6NN10450 900 6600 5812 $141,383 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2636-8NN10450 720 6600 SH450 $210,632 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2834-3NN10450 600 6600 880 $266,673 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2125-5NN10500 3600 6600 5013 $90,411 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2530-2LN10500 1800 6600 5013 $82,404 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2530-4LN10500 1200 6600 5810 $123,763 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2630-6NN10500 900 6600 5812 $149,136 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2641-8NN10500 720 6600 SH450 $218,187 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2838-3NN10500 600 6600 880 $270,738 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2125-5NN10600 3600 6600 5013 $94,894 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2534-2LN10600 1800 6600 5013 $87,693 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2535-4LN10600 1200 6600 5812 $141,383 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2636-6NN10600 900 6600 SH400 $154,652 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2727-8NN10600 720 6600 880 $275,766 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2127-3NN10600 600 6600 880 $275,766 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2127-5NN10700 3600 6600 5810 $134,305 Copper Bar Ball - Grease Lube Self Uni-directional CZ 1LA2627-2NN10700 1800 6600 5810 $105,112 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2630-4LN10700 1200 6600 5812 $145,260 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2638-6NN10700 900 6600 SH400 $166,224 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2735-8NN10700 720 6600 880 $285,703 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2132-3NN10700 600 6600 880 $285,703 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2132-5NN10TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEFC ENCLOSURE-60 Hertz 6600 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 5Page 10Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient800 3600 6600 5812 $157,480 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CZ 1LA2630-2NN10800 1800 6600 5812 $133,625 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2632-4NN10800 1200 6600 SH400 $166,224 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2735-6NN10800 900 6600 SH450 $206,847 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2832-8NN10800 720 6600 880 $296,018 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2136-3NN10800 600 6600 880 $296,018 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2136-5NN10900 3600 6600 5812 $161,910 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CZ 1LA2632-2NN10900 1800 6600 5812 $137,507 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2634-4NN10900 1200 6600 SH400 $168,922 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2735-6NN10900 900 6600 SH450 $218,187 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2838-8NN10900 720 6600 880 $306,339 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2141-3NN10900 600 6600 880 $306,339 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2141-5NN101000 3600 6600 SH400 $175,167 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ 1LA2730-2NN101000 1800 6600 SH400 $161,259 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2732-4NN101000 1200 6600 SH450 $203,069 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2830-6NN101000 900 6600 880 $285,703 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2132-8NN101000 720 6600 880 $311,009 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2141-3NN101250 3600 6600 SH450 $225,725 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ 1LA2834-2NN101250 1800 6600 SH450 $203,069 Copper Bar Ball - Grease Lube Self Uni-directional CGZ 1LA2830-4NN101250 1200 6600 880 $290,865 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2134-6NN101250 900 6600 880 $301,186 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2138-8NN101250 720 6600 SH562 $415,701 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4562-3NN101500 3600 6600 880 $312,559 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ 1LA2130-2NN101500 1800 6600 SH450 $206,847 Copper Bar Ball - Grease Lube Self Uni-directional CGZ 1LA2832-4NN101500 1200 6600 880 $295,299 Copper Bar Ball - Grease Lube Self Bi-directional CGZ 1LA2134-6NN101500 900 6600 SH560 $339,811 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4560-8NN101500 720 6600 SH564 $451,808 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4564-3NN101750 3600 6600 880 $329,796 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ 1LA2136-2NN101750 1800 6600 880 $285,703 Copper Bar Ball - Grease Lube Self Uni-directional CGZ 1LA2132-4NN101750 1200 6600 SH560 $336,833 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4560-6NN101750 900 6600 SH562 $377,910 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4562-8NN102000 3600 6600 SH560 $342,613 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional 1LA4 1LA4560-2NN102000 1800 6600 880 $290,865 Copper Bar Ball - Grease Lube Self Uni-directional CGZ 1LA2134-4NN102000 1200 6600 SH560 $343,401 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4560-6NN102000 900 6600 SH564 $410,734 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4564-8NN102250 3600 6600 SH560 $349,294 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional 1LA4 1LA4560-2NN102250 1800 6600 SH560 $295,427 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4560-4NN102250 1200 6600 SH562 $369,494 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4562-6NN102500 3600 6600 SH562 $374,545 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional 1LA4 1LA4562-2NN102500 1800 6600 SH562 $315,628 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4562-4NN102500 1200 6600 SH564 $394,744 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4564-6NN103000 3600 6600 SH564 $424,201 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional 1LA4 1LA4564-2NN103000 1800 6600 SH564 $354,344 Copper Bar Ball - Grease Lube Self Uni-directional 1LA4 1LA4564-4NN10TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEAAC ENCLOSURE-60 Hertz 460 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 6Page 1Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 720 460 588 $96,721 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-3CA10200 600 460 588 $117,616 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-5CA10200 514 460 5810 $144,976 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-7CD10200 450 460 5812 $161,067 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-9CD10250 720 460 588 $108,637 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2616-3CA10250 600 460 5810 $139,777 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-5CA10250 514 460 5812 $161,067 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-7CD10250 450 460 5812 $175,500 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2634-9CD10300 900 460 588 $108,637 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2616-8CA10300 720 460 5810 $125,473 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-3CA10300 600 460 5810 $143,750 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-5CA10300 514 460 5812 $175,500 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2634-7CD10350 900 460 588 $117,616 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-8CA10350 720 460 5810 $139,777 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-3CA10350 600 460 5812 $170,034 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-5CD10400 900 460 588 $120,598 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-8CA10400 720 460 5810 $143,750 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-3CA10400 600 460 5812 $180,043 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-5CD10450 1200 460 588 $117,616 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-6CA10450 900 460 5810 $127,588 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-8CA10450 720 460 5812 $170,034 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-3CD10500 3600 460 588 $101,760 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CA10500 1200 460 588 $120,598 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-6CA10500 900 460 5810 $139,777 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-8CA10500 720 460 5812 $175,500 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2634-3CD10600 3600 460 5810 $124,477 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-2CA10600 1800 460 588 $117,616 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-4CA10600 1200 460 5810 $127,588 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-6CA10600 900 460 5812 $162,951 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-8CD10700 3600 460 5810 $126,446 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-2CA10700 1800 460 5810 $125,473 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-4CA10700 1200 460 5810 $157,165 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-6CD10700 900 460 5812 $175,500 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2634-8CD10800 3600 460 5810 $128,479 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-2CA10800 1800 460 5810 $147,561 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-4CA10800 1200 460 5812 $161,067 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-6CD10TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEAAC ENCLOSURE-60 Hertz 2300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 6Page 2Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 720 2300 588 $99,750 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2614-3CB50200 600 2300 588 $121,561 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-5CB50200 514 2300 5810 $157,564 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-7CE50200 450 2300 5812 $168,003 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-9CE50250 720 2300 588 $119,189 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-3CB50250 600 2300 5810 $140,177 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-5CB50250 514 2300 5812 $168,003 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-7CE50250 450 2300 5812 $185,674 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-9CE50300 900 2300 588 $119,189 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-8CB50300 720 2300 5810 $127,588 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-3CB50300 600 2300 5810 $143,863 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-5CB50300 514 2300 5812 $185,674 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-7CE50300 450 2300 6811 $266,103 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2732-9CE50350 900 2300 588 $121,561 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-8CB50350 720 2300 5810 $140,177 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-3CB50350 600 2300 5812 $174,311 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-5CE50350 514 2300 6811 $248,324 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2725-7CE50350 450 2300 6813 $305,254 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-9CE50400 900 2300 5810 $127,588 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-8CB50400 720 2300 5812 $168,003 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-3CE50400 600 2300 5812 $185,674 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-5CE50400 514 2300 6811 $259,590 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2730-7CE50400 450 2300 6813 $318,280 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-9CE50450 3600 2300 588 $107,327 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB50450 1200 2300 588 $119,189 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-6CB50450 900 2300 5810 $140,177 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-8CB50450 720 2300 5812 $180,628 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2634-3CE50450 600 2300 6811 $248,324 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2725-5CE50450 514 2300 6811 $266,103 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2732-7CE50500 3600 2300 588 $109,025 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB50500 1200 2300 588 $121,561 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-6CB50500 900 2300 5810 $143,863 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-8CB50500 720 2300 5812 $185,674 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-3CE50500 600 2300 6811 $254,829 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2727-5CE50500 514 2300 6813 $305,254 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-7CE50600 3600 2300 588 $110,778 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB50600 1800 2300 588 $119,189 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-4CB50600 1200 2300 5810 $127,588 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-6CB50600 900 2300 5812 $174,311 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-8CE50600 720 2300 6811 $248,324 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2725-3CE50600 600 2300 6811 $266,103 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2732-5CE50600 514 2300 6813 $318,280 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-7CE50TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEAAC ENCLOSURE-60 Hertz 2300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 6Page 3Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient700 3600 2300 588 $111,710 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2614-2CB50700 1800 2300 5810 $125,473 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-4CB50700 1200 2300 5810 $161,256 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-6CE50700 900 2300 5812 $185,674 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-8CE50700 720 2300 6811 $259,590 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2730-3CE50700 600 2300 6813 $305,254 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-5CE50800 3600 2300 588 $116,072 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2616-2CB50800 1800 2300 5810 $127,588 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-4CB50800 1200 2300 5812 $168,003 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-6CE50800 900 2300 6811 $233,534 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2723-8CE50800 720 2300 6813 $292,224 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2734-3CE50800 600 2300 6813 $318,280 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-5CE50900 3600 2300 5810 $136,888 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-2CB50900 1800 2300 5810 $140,177 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-4CB50900 1200 2300 5812 $174,311 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-6CE50900 900 2300 6811 $240,050 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2725-8CE50900 720 2300 6813 $305,254 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-3CE501000 3600 2300 5810 $139,054 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-2CB501000 1800 2300 5810 $143,863 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-4CB501000 1200 2300 5812 $185,674 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-6CE501000 900 2300 6811 $253,080 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2730-8CE501000 720 2300 6813 $318,280 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-3CE501250 3600 2300 5810 $145,159 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-2CB501250 1800 2300 5810 $161,256 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-4CE501250 1200 2300 6813 $285,711 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2734-6CE501250 900 2300 6813 $298,732 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-8CE501500 3600 2300 5812 $179,405 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-2CE501500 1800 2300 5812 $185,674 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-4CE501500 1200 2300 6813 $298,732 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-6CE501500 900 2300 6813 $311,761 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-8CE501750 3600 2300 5812 $184,567 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-2CE501750 1800 2300 6811 $238,006 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2727-4CE501750 1200 2300 6813 $305,254 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2741-6CE502000 3600 2300 5812 $195,635 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2632-2CE502000 1800 2300 6813 $267,873 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2732-4CE502250 3600 2300 6811 $256,613 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2723-2CE502250 1800 2300 6813 $280,906 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2736-4CE502500 3600 2300 6813 $267,265 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2725-2CE502500 1800 2300 6813 $293,932 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2741-4CE503000 3600 2300 6813 $291,984 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2727-2CE503000 1800 2300 6813 $298,332 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2741-4CE503500 3600 2300 6813 $306,105 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2732-2CE504000 3600 2300 6813 $317,179 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZB 1RQ2734-2BE50TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEAAC ENCLOSURE-60 Hertz 4000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 6Page 4Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 720 4000 588 $103,271 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2614-3CB40200 600 4000 588 $123,750 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-5CB40200 514 4000 5810 $159,729 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-7CE40200 450 4000 5812 $169,268 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-9CE40250 720 4000 588 $120,549 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-3CB40250 600 4000 5810 $142,341 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-5CB40250 514 4000 5812 $169,268 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-7CE40250 450 4000 5812 $186,942 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-9CE40300 900 4000 588 $120,549 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-8CB40300 720 4000 5810 $130,280 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-3CB40300 600 4000 5812 $169,268 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-5CE40300 514 4000 5812 $186,942 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-7CE40300 450 4000 6811 $267,133 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2732-9CE40350 900 4000 588 $123,750 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-8CB40350 720 4000 5810 $159,729 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-3CE40350 600 4000 5812 $178,101 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-5CE40350 514 4000 6811 $249,345 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2725-7CE40350 450 4000 6813 $308,572 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-9CE40400 900 4000 5810 $130,280 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-8CB40400 720 4000 5812 $169,268 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-3CE40400 600 4000 5812 $186,942 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-5CE40400 514 4000 6811 $260,611 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2730-7CE40400 450 4000 6813 $321,593 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-9CE40450 3600 4000 588 $109,165 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB40450 1200 4000 588 $123,750 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-6CB40450 900 4000 5810 $142,341 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-8CB40450 720 4000 5812 $181,896 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2634-3CE40450 600 4000 6811 $249,345 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2725-5CE40450 514 4000 6811 $267,133 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2732-7CE40500 3600 4000 588 $110,892 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB40500 1200 4000 5810 $130,280 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-6CB40500 900 4000 5810 $145,128 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-8CB40500 720 4000 5812 $186,942 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-3CE40500 600 4000 6811 $255,858 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2727-5CE40500 514 4000 6813 $308,572 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-7CE40600 3600 4000 588 $112,675 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB40600 1800 4000 588 $120,549 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-4CB40600 1200 4000 5810 $142,341 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-6CB40600 900 4000 5812 $178,101 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-8CE40600 720 4000 6811 $249,345 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2725-3CE40600 600 4000 6811 $267,133 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2732-5CE40600 514 4000 6813 $321,593 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-7CE40TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEAAC ENCLOSURE-60 Hertz 4000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 6Page 5Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient700 3600 4000 588 $113,542 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2614-2CB40700 1800 4000 5810 $126,646 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-4CB40700 1200 4000 5810 $162,518 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-6CE40700 900 4000 5812 $186,942 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-8CE40700 720 4000 6811 $260,611 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2730-3CE40700 600 4000 6813 $308,572 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-5CE40800 3600 4000 588 $118,150 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2616-2CB40800 1800 4000 5810 $130,280 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-4CB40800 1200 4000 5812 $169,268 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-6CE40800 900 4000 6811 $234,560 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2723-8CE40800 720 4000 6813 $295,540 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2734-3CE40800 600 4000 6813 $321,593 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-5CE40900 3600 4000 5810 $133,530 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-2CB40900 1800 4000 5810 $142,341 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-4CB40900 1200 4000 5812 $178,101 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-6CE40900 900 4000 6811 $241,077 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2725-8CE40900 720 4000 6813 $308,572 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-3CE401000 3600 4000 5810 $139,386 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-2CB401000 1800 4000 5810 $145,128 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-4CB401000 1200 4000 5812 $186,942 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-6CE401000 900 4000 6811 $254,103 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2730-8CE401000 720 4000 6813 $321,593 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-3CE401250 3600 4000 5810 $148,202 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-2CB401250 1800 4000 5810 $162,518 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-4CE401250 1200 4000 6813 $289,024 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2734-6CE401250 900 4000 6813 $302,050 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-8CE401500 3600 4000 5812 $185,863 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-2CE401500 1800 4000 5812 $186,942 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-4CE401500 1200 4000 6813 $302,050 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-6CE401500 900 4000 6813 $315,080 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-8CE401750 3600 4000 5812 $188,804 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-2CE401750 1800 4000 6811 $239,035 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2727-4CE401750 1200 4000 6813 $308,572 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2741-6CE402000 3600 4000 6811 $250,661 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2721-2CE402000 1800 4000 6813 $271,192 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2732-4CE402250 3600 4000 6811 $257,732 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2723-2CE402250 1800 4000 6813 $284,218 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2736-4CE402500 3600 4000 6813 $270,853 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2725-2CE402500 1800 4000 6813 $297,251 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2741-4CE403000 3600 4000 6813 $295,578 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2727-2CE403000 1800 4000 6813 $301,701 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2741-4CE403500 3600 4000 6813 $309,696 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2732-2CE404000 3600 4000 6813 $320,764 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZB 1RQ2734-2BE40TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEAAC ENCLOSURE-60 Hertz 6600 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 6Page 6Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient250 1200 6600 588 $126,095 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-6CB10250 900 6600 588 $122,881 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-8CB10300 3600 6600 588 $111,520 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB10300 1200 6600 588 $128,046 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-6CB10300 900 6600 5810 $133,189 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-8CB10300 514 6600 6811 $263,935 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2730-7CE10350 3600 6600 588 $113,285 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB10350 1800 6600 588 $107,832 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-4CB10350 1200 6600 588 $130,060 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-6CB10350 900 6600 5810 $150,180 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-8CB10350 720 6600 6811 $233,121 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2718-3CE10350 600 6600 6811 $252,664 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2725-5CE10350 514 6600 6813 $298,855 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2734-7CE10400 3600 6600 588 $115,106 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB10400 1800 6600 588 $109,502 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-4CB10400 1200 6600 5810 $145,256 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-6CB10400 900 6600 5810 $167,567 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-8CE10400 720 6600 6811 $239,634 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2721-3CE10400 600 6600 6811 $263,935 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2730-5CE10400 514 6600 6813 $311,888 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-7CE10450 3600 6600 588 $116,987 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB10450 1800 6600 588 $111,256 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2614-4CB10450 1200 6600 5810 $162,646 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-6CE10450 900 6600 5810 $170,161 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-8CE10450 720 6600 6811 $252,664 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2725-3CE10450 600 6600 6811 $270,445 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2732-5CE10450 514 6600 6813 $324,909 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-7CE10500 3600 6600 588 $119,240 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2614-2CB10500 1800 6600 588 $114,213 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2616-4CB10500 1200 6600 5810 $167,567 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-6CE10500 900 6600 5812 $174,311 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-8CE10500 720 6600 6811 $259,177 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2727-3CE10500 600 6600 6813 $305,372 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2736-5CE10600 3600 6600 588 $120,508 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2616-2CB10600 1800 6600 5810 $146,951 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-4CE10600 1200 6600 5812 $174,311 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-6CE10600 900 6600 5812 $191,988 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2636-8CE10600 720 6600 6811 $270,445 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2732-3CE10600 600 6600 6813 $324,909 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-5CE10700 3600 6600 5810 $134,620 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-2CB10700 1800 6600 5810 $150,579 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-4CE10700 1200 6600 5812 $186,942 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2634-6CE10700 900 6600 6811 $244,395 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2725-8CE10700 720 6600 6813 $311,888 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-3CE10TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEAAC ENCLOSURE-60 Hertz 6600 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 6Page 7Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient800 3600 6600 5810 $142,349 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-2CB10800 1800 6600 5810 $162,646 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-4CE10800 1200 6600 6811 $237,885 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2723-6CE10800 900 6600 6811 $250,906 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2727-8CE10800 720 6600 6813 $324,909 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2743-3CE10900 3600 6600 5810 $144,601 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-2CB10900 1800 6600 5810 $167,567 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-4CE10900 1200 6600 6811 $244,395 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2725-6CE10900 900 6600 6811 $257,425 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2730-8CE101000 3600 6600 5810 $168,950 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-2CE101000 1800 6600 5812 $186,942 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2634-4CE101000 1200 6600 6811 $257,425 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2730-6CE101000 900 6600 6813 $298,855 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2736-8CE101250 3600 6600 5812 $180,442 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-2CE101250 1800 6600 5812 $189,836 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2634-4CE101250 1200 6600 6813 $298,855 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2736-6CE101250 900 6600 6813 $311,888 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2741-8CE101500 3600 6600 5812 $192,302 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-2CE101500 1800 6600 6811 $257,425 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2730-4CE101500 1200 6600 6813 $311,888 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2741-6CE101750 3600 6600 6811 $261,332 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2723-2CE101750 1800 6600 6813 $281,027 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2734-4CE102000 3600 6600 6811 $265,575 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2723-2CE102000 1800 6600 6813 $294,050 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2738-4CE102250 3600 6600 6813 $274,457 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2725-2CE102250 1800 6600 6813 $300,566 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2741-4CE102500 3600 6600 6813 $299,176 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2727-2CE102500 1800 6600 6813 $305,066 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ 1RQ2741-4CE103000 3600 6600 6813 $320,351 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ 1RQ2734-2CE10TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionODP ENCLOSURE-50 Hertz 3300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 1APage 1Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 3000 3300 508 $48,912 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB00200 1000 3300 508 $47,127 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-6BB00200 750 3300 508 $53,265 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-8BB00250 3000 3300 508 $49,669 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB00250 1500 3300 508 $47,127 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-4BB00250 1000 3300 508 $49,413 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-6BB00250 750 3300 5010 $62,363 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2523-8BB00300 3000 3300 508 $52,082 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB00300 1500 3300 508 $49,413 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB00300 1000 3300 508 $51,345 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-6BB00300 750 3300 5010 $82,029 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2530-8BE00350 3000 3300 508 $52,889 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB00350 1500 3300 508 $50,153 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB00350 1000 3300 508 $53,265 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-6BB00350 750 3300 588 $62,131 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2614-8BB00400 3000 3300 508 $53,720 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB00400 1500 3300 508 $51,345 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB00400 1000 3300 508 $56,003 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-6BB00400 750 3300 588 $70,470 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2616-8BB00450 3000 3300 508 $55,256 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB00450 1500 3300 508 $53,265 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-4BB00450 1000 3300 5010 $62,363 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2523-6BB00450 750 3300 588 $78,881 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-8BB00500 3000 3300 508 $56,111 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB00500 1500 3300 508 $54,063 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-4BB00500 1000 3300 5010 $66,171 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-6BB00500 750 3300 588 $81,991 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-8BB00600 3000 3300 508 $59,604 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2515-2BB00600 1500 3300 5010 $60,676 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-4BB00600 1000 3300 588 $81,991 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB00600 750 3300 5810 $98,921 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-8BB00700 3000 3300 5010 $68,027 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB00700 1500 3300 5010 $66,171 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-4BB00700 1000 3300 5810 $87,207 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-6BB00700 750 3300 5810 $101,616 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-8BB00800 3000 3300 5010 $71,201 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB00800 1500 3300 5810 $83,701 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-4BB00800 1000 3300 5810 $98,921 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-6BB00800 750 3300 5812 $128,549 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2630-8BE00900 3000 3300 5010 $74,375 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2521-2BB00900 1500 3300 5810 $87,207 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-4BB00900 1000 3300 5812 $128,549 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2630-6BE00900 750 3300 5812 $145,686 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-8BE001000 3000 3300 5010 $77,546 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2523-2BB001000 1500 3300 5810 $98,921 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-4BB001000 1000 3300 5812 $130,539 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2630-6BE00TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionODP ENCLOSURE-50 Hertz 3300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 1APage 2Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient1250 3000 3300 5810 $89,698 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2618-2BB001250 1500 3300 5812 $128,180 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2630-4BE001250 1000 3300 5812 $134,671 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-6BE001500 3000 3300 5810 $114,978 Copper Bar Ball - Grease Lube Self Uni-directional CG 1RA2623-2BE001500 1500 3300 5812 $145,320 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-4BE001500 1000 3300 5812 $145,686 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-6BE001750 3000 3300 5812 $133,626 Copper Bar Ball - Grease Lube Self Uni-directional CG 1RA2625-2BE00TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionODP ENCLOSURE-50 Hertz 6000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 1APage 3Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient300 1500 6000 508 $53,537 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB60350 1500 6000 508 $55,463 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB60400 3000 6000 508 $59,518 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB60400 1500 6000 5010 $64,799 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-4BB60450 3000 6000 508 $63,866 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2515-2BB60450 1500 6000 5010 $65,769 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-4BB60500 3000 6000 5010 $69,247 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB60500 1500 6000 5010 $66,481 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2523-4BB60600 3000 6000 5010 $70,319 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB60600 1500 6000 5010 $68,460 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2525-4BB60700 3000 6000 5010 $75,463 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB60700 1500 6000 5810 $86,509 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-4BB60800 3000 6000 5810 $90,748 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2618-2BB60800 1500 6000 5810 $90,037 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-4BB60900 3000 6000 5810 $92,184 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2618-2BB60900 1500 6000 5810 $101,735 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-4BB601000 3000 6000 5810 $98,280 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2621-2BB601000 1500 6000 5810 $106,515 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-4BB601250 3000 6000 5810 $99,835 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2621-2BB601250 1500 6000 5812 $145,320 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2634-4BE601500 3000 6000 5810 $124,620 Copper Bar Ball - Grease Lube Self Uni-directional CG 1RA2623-2BE601750 3000 6000 5812 $149,922 Copper Bar Ball - Grease Lube Self Uni-directional CG 1RA2630-2BE60TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPI ENCLOSURE-50 Hertz 3300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 2APage 1Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 3000 3300 508 $49,625 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB00200 1000 3300 508 $47,817 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-6BB00200 750 3300 508 $53,956 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-8BB00250 3000 3300 508 $50,393 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2508-2BB00250 1500 3300 508 $47,817 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2512-4BB00250 1000 3300 508 $50,103 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-6BB00250 750 3300 5010 $63,053 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2523-8BB00300 3000 3300 508 $52,796 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB00300 1500 3300 508 $50,103 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB00300 1000 3300 508 $52,035 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-6BB00300 750 3300 5010 $82,720 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2530-8BE00350 3000 3300 508 $53,613 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB00350 1500 3300 508 $50,853 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB00350 1000 3300 508 $53,956 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-6BB00350 750 3300 588 $63,607 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2614-8BB00400 3000 3300 508 $54,456 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2511-2BB00400 1500 3300 508 $52,035 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB00400 1000 3300 508 $56,693 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-6BB00400 750 3300 588 $71,945 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2616-8BB00450 3000 3300 508 $55,970 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB00450 1500 3300 508 $53,956 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-4BB00450 1000 3300 5010 $63,053 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2523-6BB00450 750 3300 588 $80,357 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2618-8BB00500 3000 3300 508 $56,836 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB00500 1500 3300 508 $54,763 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2518-4BB00500 1000 3300 5010 $66,861 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-6BB00500 750 3300 588 $83,466 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-8BB00600 3000 3300 508 $60,317 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2515-2BB00600 1500 3300 5010 $61,366 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-4BB00600 1000 3300 588 $83,466 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-6BB00600 750 3300 5810 $100,396 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-8BB00700 3000 3300 5010 $68,741 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB00700 1500 3300 5010 $66,861 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2527-4BB00700 1000 3300 5810 $88,683 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-6BB00700 750 3300 5810 $103,091 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-8BB00800 3000 3300 5010 $71,915 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB00800 1500 3300 5810 $85,177 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-4BB00800 1000 3300 5810 $100,396 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-6BB00800 750 3300 5812 $130,024 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2630-8BE00900 3000 3300 5010 $75,088 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2521-2BB00900 1500 3300 5810 $88,683 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-4BB00900 1000 3300 5812 $130,024 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2630-6BE00900 750 3300 5812 $147,162 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-8BE001000 3000 3300 5010 $78,259 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2523-2BB001000 1500 3300 5810 $100,396 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-4BB001000 1000 3300 5812 $132,037 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2630-6BE00TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPI ENCLOSURE-50 Hertz 3300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 2APage 2Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient1250 3000 3300 5810 $91,206 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2618-2BB001250 1500 3300 5812 $129,655 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2630-4BE001250 1000 3300 5812 $136,146 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2632-6BE001500 3000 3300 5810 $116,486 Copper Bar Ball - Grease Lube Self Uni-directional CG 1RA2623-2BE001500 1500 3300 5812 $146,796 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-4BE001500 1000 3300 5812 $147,162 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2636-6BE001750 3000 3300 5812 $135,134 Copper Bar Ball - Grease Lube Self Uni-directional CG 1RA2625-2BE00TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPI ENCLOSURE-50 Hertz 6000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 2APage 3Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient300 1500 6000 508 $54,227 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2514-4BB60350 1500 6000 508 $56,153 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2516-4BB60400 3000 6000 508 $60,232 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2513-2BB60400 1500 6000 5010 $65,490 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-4BB60450 3000 6000 508 $64,579 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2515-2BB60450 1500 6000 5010 $66,470 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2521-4BB60500 3000 6000 5010 $69,960 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB60500 1500 6000 5010 $67,171 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2523-4BB60600 3000 6000 5010 $71,043 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2516-2BB60600 1500 6000 5010 $69,150 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2525-4BB60700 3000 6000 5010 $76,177 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2518-2BB60700 1500 6000 5810 $87,985 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2621-4BB60800 3000 6000 5810 $92,255 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2618-2BB60800 1500 6000 5810 $91,512 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2623-4BB60900 3000 6000 5810 $93,715 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2618-2BB60900 1500 6000 5810 $103,210 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2625-4BB601000 3000 6000 5810 $99,788 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2621-2BB601000 1500 6000 5810 $107,991 Alum. Diecast Ball - Grease Lube Self Bi-directional CG 1RA2627-4BB601250 3000 6000 5810 $101,367 Alum. Diecast Ball - Grease Lube Self Uni-directional CG 1RA2621-2BB601250 1500 6000 5812 $146,796 Copper Bar Ball - Grease Lube Self Bi-directional CG 1RA2634-4BE601500 3000 6000 5810 $126,128 Copper Bar Ball - Grease Lube Self Uni-directional CG 1RA2623-2BE601750 3000 6000 5812 $151,430 Copper Bar Ball - Grease Lube Self Uni-directional CG 1RA2630-2BE60TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPII ENCLOSURE-50 Hertz 3300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 3APage 1Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 3000 3300 508 $53,646 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BB00200 1000 3300 508 $51,708 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2512-6BB00200 750 3300 508 $57,847 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2518-8BB00250 3000 3300 508 $54,477 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2508-2BB00250 1500 3300 508 $51,708 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2512-4BB00250 1000 3300 508 $53,994 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-6BB00250 750 3300 5010 $66,944 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2523-8BB00300 3000 3300 508 $56,817 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BB00300 1500 3300 508 $53,994 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BB00300 1000 3300 508 $55,926 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-6BB00300 750 3300 5010 $86,611 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2530-8BE00350 3000 3300 508 $57,697 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BB00350 1500 3300 508 $54,802 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BB00350 1000 3300 508 $57,847 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2518-6BB00350 750 3300 588 $68,994 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2614-8BB00400 3000 3300 508 $58,604 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2511-2BB00400 1500 3300 508 $55,926 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-4BB00400 1000 3300 508 $60,584 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2521-6BB00400 750 3300 588 $77,332 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2616-8BB00450 3000 3300 508 $59,991 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2513-2BB00450 1500 3300 508 $57,847 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2518-4BB00450 1000 3300 5010 $66,944 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2523-6BB00450 750 3300 588 $85,744 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2618-8BB00500 3000 3300 508 $60,920 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2513-2BB00500 1500 3300 508 $58,713 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2518-4BB00500 1000 3300 5010 $70,752 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2527-6BB00500 750 3300 588 $88,854 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-8BB00600 3000 3300 508 $64,338 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2515-2BB00600 1500 3300 5010 $65,257 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2521-4BB00600 1000 3300 588 $88,854 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-6BB00600 750 3300 5810 $105,784 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-8BB00700 3000 3300 5010 $72,762 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2516-2BB00700 1500 3300 5010 $70,752 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2527-4BB00700 1000 3300 5810 $94,070 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2623-6BB00700 750 3300 5810 $108,479 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2627-8BB00800 3000 3300 5010 $75,936 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2518-2BB00800 1500 3300 5810 $90,564 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-4BB00800 1000 3300 5810 $105,784 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-6BB00800 750 3300 5812 $135,412 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2630-8BE00900 3000 3300 5010 $79,110 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2521-2BB00900 1500 3300 5810 $94,070 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2623-4BB00900 1000 3300 5812 $135,412 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2630-6BE00900 750 3300 5812 $152,549 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2636-8BE001000 3000 3300 5010 $82,280 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2523-2BB001000 1500 3300 5810 $105,784 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-4BB001000 1000 3300 5812 $137,508 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2630-6BE00TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPII ENCLOSURE-50 Hertz 3300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 3APage 2Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient1250 3000 3300 5810 $96,710 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2618-2BB001250 1500 3300 5812 $135,043 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2630-4BE001250 1000 3300 5812 $141,534 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2632-6BE001500 3000 3300 5810 $121,991 Copper Bar Ball - Grease Lube Self Uni-directional CGII 1RP2623-2BE001500 1500 3300 5812 $152,183 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2636-4BE001500 1000 3300 5812 $152,549 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2636-6BE001750 3000 3300 5812 $140,639 Copper Bar Ball - Grease Lube Self Uni-directional CGII 1RP2625-2BE00TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionWPII ENCLOSURE-50 Hertz 6000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 3APage 3Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient300 1500 6000 508 $58,118 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2514-4BB60350 1500 6000 508 $60,044 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2516-4BB60400 3000 6000 508 $64,253 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2513-2BB60400 1500 6000 5010 $69,381 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2521-4BB60450 3000 6000 508 $68,601 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2515-2BB60450 1500 6000 5010 $70,419 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2521-4BB60500 3000 6000 5010 $73,982 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2516-2BB60500 1500 6000 5010 $71,062 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2523-4BB60600 3000 6000 5010 $75,127 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2516-2BB60600 1500 6000 5010 $73,041 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2525-4BB60700 3000 6000 5010 $80,198 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2518-2BB60700 1500 6000 5810 $93,372 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2621-4BB60800 3000 6000 5810 $97,760 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2618-2BB60800 1500 6000 5810 $96,899 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2623-4BB60900 3000 6000 5810 $99,307 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2618-2BB60900 1500 6000 5810 $108,598 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2625-4BB601000 3000 6000 5810 $105,293 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2621-2BB601000 1500 6000 5810 $113,378 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII 1RP2627-4BB601250 3000 6000 5810 $106,959 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII 1RP2621-2BB601250 1500 6000 5812 $152,183 Copper Bar Ball - Grease Lube Self Bi-directional CGII 1RP2634-4BE601500 3000 6000 5810 $131,632 Copper Bar Ball - Grease Lube Self Uni-directional CGII 1RP2623-2BE601750 3000 6000 5812 $156,935 Copper Bar Ball - Grease Lube Self Uni-directional CGII 1RP2630-2BE60TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEWAC ENCLOSURE-50 Hertz 3300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 4APage 1Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient350 750 3300 588 $116,683 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2614-8BB00400 750 3300 588 $125,021 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2616-8BB00450 750 3300 588 $133,433 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2618-8BB00500 750 3300 588 $136,543 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-8BB00600 1000 3300 588 $136,543 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-6BB00600 750 3300 5810 $153,473 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-8BB00700 1000 3300 5810 $141,759 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2623-6BB00700 750 3300 5810 $156,168 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2627-8BB00800 1500 3300 5810 $138,253 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-4BB00800 1000 3300 5810 $153,473 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-6BB00800 750 3300 5812 $183,101 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2630-8BE00900 1500 3300 5810 $141,759 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2623-4BB00900 1000 3300 5812 $183,101 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2630-6BE00900 750 3300 5812 $200,238 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2636-8BE001000 1500 3300 5810 $153,473 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-4BB001000 1000 3300 5812 $185,935 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2630-6BE001250 3000 3300 5810 $145,439 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2618-2BB001250 1500 3300 5812 $182,732 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2630-4BE001250 1000 3300 5812 $189,223 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2632-6BE001500 3000 3300 5810 $170,720 Copper Bar Ball - Grease Lube Self Uni-directional CGG 1RN2623-2BE001500 1500 3300 5812 $199,872 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2636-4BE001500 1000 3300 5812 $200,238 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2636-6BE001750 3000 3300 5812 $189,368 Copper Bar Ball - Grease Lube Self Uni-directional CGG 1RN2625-2BE00TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEWAC ENCLOSURE-50 Hertz 6000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 4APage 2Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient700 1500 6000 5810 $141,061 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2621-4BB60800 3000 6000 5810 $146,489 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2618-2BB60800 1500 6000 5810 $144,588 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2623-4BB60900 3000 6000 5810 $148,807 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2618-2BB60900 1500 6000 5810 $156,287 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2625-4BB601000 3000 6000 5810 $154,022 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2621-2BB601000 1500 6000 5810 $161,067 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG 1RN2627-4BB601250 3000 6000 5810 $156,459 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG 1RN2621-2BB601250 1500 6000 5812 $199,872 Copper Bar Ball - Grease Lube Self Bi-directional CGG 1RN2634-4BE601500 3000 6000 5810 $180,361 Copper Bar Ball - Grease Lube Self Uni-directional CGG 1RN2623-2BE601750 3000 6000 5812 $205,664 Copper Bar Ball - Grease Lube Self Uni-directional CGG 1RN2630-2BE60TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEFC ENCLOSURE-50 Hertz 3300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 5APage 1Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient200 1500 3300 509 $52,271 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2514-4LN00200 1000 3300 509 $54,808 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2518-6LN00200 750 3300 5011 $67,052 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2527-8LN00250 3000 3300 509 $56,040 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2514-2LN00250 1500 3300 509 $54,162 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2516-4LN00250 1000 3300 509 $56,799 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-6LN00250 750 3300 5013 $86,788 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2537-8LN00300 3000 3300 509 $58,069 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2516-2LN00300 1500 3300 509 $55,019 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2516-4LN00300 1000 3300 5011 $67,052 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2527-6LN00300 750 3300 5810 $98,150 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2627-8LN00350 3000 3300 509 $60,109 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2518-2LN00350 1500 3300 5011 $57,525 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2518-4LN00350 1000 3300 5013 $81,493 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2532-6LN00350 750 3300 5810 $102,097 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2630-8LN00400 3000 3300 5011 $66,763 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2521-2LN00400 1500 3300 5011 $59,313 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2521-4LN00400 1000 3300 5013 $86,788 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2537-6LN00400 750 3300 5810 $103,626 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2630-8LN00450 3000 3300 5011 $68,794 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2523-2LN00450 1500 3300 5011 $62,891 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2525-4LN00450 1000 3300 5810 $98,150 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2627-6LN00450 750 3300 5812 $133,398 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2634-8NN00500 3000 3300 5011 $70,829 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2525-2LN00500 1500 3300 5013 $79,378 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2530-4LN00500 1000 3300 5810 $102,097 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2630-6LN00500 750 3300 5812 $141,156 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2638-8NN00600 3000 3300 5013 $91,695 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2534-2LN00600 1500 3300 5013 $84,664 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2535-4LN00600 1000 3300 5812 $133,398 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2634-6NN00600 750 3300 5812 $145,029 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2641-8NN00700 3000 3300 5810 $113,343 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2627-2LN00700 1500 3300 5812 $137,271 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2636-4NN00700 1000 3300 5812 $141,156 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2638-6NN00800 1500 3300 5812 $141,156 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2638-4NN00900 1500 3300 5812 $143,269 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2638-4NN00TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEFC ENCLOSURE-50 Hertz 6000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 5APage 2Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient250 3000 6000 5011 $67,629 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2518-2LN60250 750 6000 5810 $101,171 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2627-8LN60300 3000 6000 5011 $69,670 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2521-2LN60300 1500 6000 5011 $63,853 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2523-4LN60300 750 6000 5810 $121,938 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2630-8NN60350 3000 6000 5011 $73,745 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2525-2LN60350 1500 6000 5011 $64,808 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2523-4LN60350 1000 6000 5810 $101,171 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2627-6LN60350 750 6000 5812 $137,507 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2634-8NN60400 3000 6000 5013 $90,411 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2530-2LN60400 1500 6000 5013 $80,283 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2527-4LN60400 1000 6000 5810 $105,112 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2630-6LN60400 750 6000 5812 $145,260 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2638-8NN60450 3000 6000 5013 $94,894 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2534-2LN60450 1500 6000 5013 $82,404 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2530-4LN60450 1000 6000 5810 $106,686 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2630-6LN60500 3000 6000 5810 $106,866 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2623-2LN60500 1500 6000 5013 $87,693 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ 1LA2535-4LN60500 1000 6000 5812 $133,625 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2632-6NN60600 3000 6000 5810 $116,539 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ 1LA2627-2LN60600 1500 6000 5812 $133,625 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2632-4NN60600 1000 6000 5812 $145,260 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2638-6NN60700 1500 6000 5812 $137,507 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2634-4NN60800 1500 6000 5812 $145,260 Copper Bar Ball - Grease Lube Self Bi-directional CZ 1LA2638-4NN60TypeMRPDRatings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEAAC ENCLOSURE-50 Hertz 3300 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 6APage 1Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient500 3000 3300 588 $109,165 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB00500 1500 3300 588 $111,878 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2616-4CB00600 3000 3300 588 $113,542 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2614-2CB00600 1500 3300 588 $120,549 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-4CB00700 3000 3300 588 $118,150 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2616-2CB00700 1500 3300 588 $122,415 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-4CB00800 3000 3300 5810 $133,530 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-2CB00800 1500 3300 5810 $130,280 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-4CB00900 3000 3300 5810 $139,386 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-2CB00900 1500 3300 5810 $132,297 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-4CB001000 3000 3300 5810 $148,202 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-2CB001000 1500 3300 5810 $145,128 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-4CB001250 3000 3300 5812 $180,701 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2630-2CE001250 1500 3300 5812 $178,101 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-4CE001500 3000 3300 5812 $185,863 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-2CE00TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesHP RPM Voltage FrameBasic ListPricesStd. RotorConstructionTEAAC ENCLOSURE-50 Hertz 6000 VoltStd. Bearings &LubricationStd. BearingCoolingRotationSection 1Part 6APage 2Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient350 3000 6000 588 $111,520 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB60350 1500 6000 588 $107,832 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-4CB60400 3000 6000 588 $113,285 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB60400 1500 6000 588 $109,502 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-4CB60450 3000 6000 588 $115,106 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2612-2CB60450 1500 6000 588 $111,256 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2614-4CB60500 3000 6000 588 $119,240 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2614-2CB60500 1500 6000 588 $114,213 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2616-4CB60600 3000 6000 588 $120,508 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2616-2CB60600 1500 6000 5810 $129,561 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-4CB60700 3000 6000 5810 $134,620 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2618-2CB60700 1500 6000 5810 $133,189 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2623-4CB60800 3000 6000 5810 $142,349 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-2CB60800 1500 6000 5810 $145,256 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-4CB60900 3000 6000 5810 $144,601 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2621-2CB60900 1500 6000 5810 $150,180 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ 1RQ2627-4CB601000 3000 6000 5812 $180,442 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2625-2CE601000 1500 6000 5812 $186,942 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2634-4CE601250 3000 6000 5812 $192,302 Copper Bar Ball - Grease Lube Self Uni-directional CAZ 1RQ2632-2CE60TypeMRPD

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Base List Prices, Frame, and FeaturesTEFC Enclosure per IEEE 841 Std- 2009(Order Code R61 / Category 2)Section 1Part 5BPage 1Date 11/12AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C AmbientThis specification addresses motor requirements on TEFC, anti-friction bearing motors through 500 HP. The Basic ListPrices in the following tables include special features of this specification which are but not limited to; IP55 degree of protection which includes rotating shaft seals to provide maximum protection against contaminantsentering the motor along the shaft Minimum guaranteed full load efficiency per IEEE 841 Table 2 (See General Comment #2) Cast iron fan housing Corrosion protection of rotor Alemite grease fittings Precision balance Maximum bearing temperature limits of 50C for 2-pole, 45C for 4-pole and slower Frame breather-drain Sealed leads between motor and terminal box Max. shaft indicator reading of 0.0015-in. for direct-connected, 0.002-in. if belt drive Motor foot flatness not to exceed 0.005-in. Special nameplate and auxiliary tags Testing per paragraph 9.2General Comments to IEEE 841- 2009All proposals to must contain the following comments in addition to any other applicable comments and/or exceptionsalready taken and depending upon the quotation request;1. Para 6.8: Taking exception to 90 dbA sound power level. Quoting typical sound pressure level in dBA asmeasured per NEMA MG1, Part 9 at 3 feet and at no load. Consult factory for lower noise options.2. Para 8.0: The minimum and nominal full load efficiencies per Table 2 are based upon efficiency evaluation perIEEE 112-2004, Methods E1 or F1 with assumed stray load loss.Include Comment 3 if space heaters are quoted as a base feature or option3. Para. 11.b: Taking exception and quoting space heaters with 160 deg. C maximum sheath temperature.Include Comment 4 if motor if a hazardous location is not specified4. Para 3.1.e: Motor offered is based on a non-hazardous area application.Include Comment 5 if motor is not direct-connected and is to be V-belt drive5. Para 6.1.d: Taking exception and quoting L10 life of 17,500 hours pending receipt and review of motor and drivensheave sizes as well as the size, type and number of belts.Include Comment 6 if motor is 2-pole (3600 or 3000 RPM)6. Para 6.9: Taking exception and quoting maximum vibration of 0.10 ips unfiltered as measured on the bearinghousing.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 1Part 5BPage 2Date 11/12Base List Prices, Frame, and FeaturesTEFC Enclosure per IEEE 841 Std- 2009 - continued(Order Code R61 / Category 2)AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C AmbientHP RPM FrameMin.Guar.FL Eff *BasicListPriceStd. RotorConstruction460 VoltCoolingFanTyp.NoisedBARotation Type MRPD200 900 509 93.6 $63,810 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250M-8LA10-Z250 900 5011 93.6 $70,835 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250P-8LA10-Z300 900 5013 – $88,119 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250S-8LA10-Z350 1200 5011 95.0 $89,530 Copper Bar Bronze 80 Bi-directional CZ 1LA250P-6NA10-Z350 900 5013 – $93,417 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250W-8LA10-Z400 3600 509S 95.0 $63,619 Alum. DiecastConductivePlastic86 Uni-directional CZ 1LA250L-2LA10-Z400 1800 5011 95.4 $68,736 Alum. Diecast Bronze 85 Bi-directional CZ 1LA250P-4LA10-Z400 1200 5011 95.0 $91,518 Copper Bar Bronze 80 Bi-directional CZ 1LA250Q-6NA10-Z400 900 5810 – $97,591 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258H-8LA10-Z450 3600 5011S 95.0 $72,305 Alum. DiecastConductivePlastic85 Uni-directional CZ 1LA250N-2LA10-Z450 1800 5011 95.4 $70,661 Alum. Diecast Bronze 85 Bi-directional CZ 1LA250P-4LA10-Z450 1200 5013 95.0 $92,405 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250W-6LA10-Z450 900 5810 – $105,824 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258K-8LA10-Z500 3600 5011S 95.0 $74,345 Alum. DiecastConductivePlastic85 Uni-directional CZ 1LA250P-2LA10-Z500 1800 5011 95.4 $72,638 Alum. Diecast Bronze 85 Bi-directional CZ 1LA250P-4LA10-Z500 1200 5810 95.0 $97,591 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258H-6LA10-Z500 900 5812 – $141,511 Copper Bar Bronze 80 Bi-directional CZ 1LA258M-8NA10-Z*Per IEEE841-2009, Table 2.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 1Part 5BPage 3Date 11/12Base List Prices, Frame, and FeaturesTEFC Enclosure per IEEE 841 Std- 2009 - continued(Order Code R61 / Category 2)AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C AmbientHP RPM FrameMin.Guar.FL EffBasicListPriceStd. RotorConstruction2300 VoltCoolingFanTyp.NoisedBARotation Type MRPD250 3600 509S 94.1 $60,513 Alum. DiecastConductivePlastic86 Uni-directional CZ 1LA250H-2LN20-Z250 1800 509 94.1 $57,828 Alum. Diecast Bronze 84 Bi-directional CZ 1LA250K-4LN20-Z250 1200 509 94.1 $61,519 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250M-6LN20-Z250 900 5011 94.1 $73,768 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250Q-8LN20-Z300 3600 509S 94.1 $61,377 Alum. DiecastConductivePlastic86 Uni-directional CZ 1LA250H-2LN20-Z300 1800 509 94.1 $60,847 Alum. Diecast Bronze 84 Bi-directional CZ 1LA250K-4LN20-Z300 1200 509 94.1 $63,518 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250M-6LN20-Z300 900 588 94.1 $93,036 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258F-8LN20-Z350 3600 509S 94.1 $62,551 Alum. DiecastConductivePlastic86 Uni-directional CZ 1LA250K-2LN20-Z350 1800 509 94.1 $61,681 Alum. Diecast Bronze 84 Bi-directional CZ 1LA250K-4LN20-Z350 1200 5011 94.1 $71,777 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250P-6LN20-Z350 900 588 94.1 $94,001 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258G-8LN20-Z400 3600 509S 94.1 $63,447 Alum. DiecastConductivePlastic86 Uni-directional CZ 1LA250K-2LN20-Z400 1800 5011 94.1 $64,290 Alum. Diecast Bronze 85 Bi-directional CZ 1LA250L-4LN20-Z400 1200 5011 94.1 $73,768 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250Q-6LN20-Z400 900 5810 94.1 $106,455 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258J-8LN20-Z450 3600 509S 94.1 $64,585 Alum. DiecastConductivePlastic86 Uni-directional CZ 1LA250L-2LN20-Z450 1800 5011 94.1 $66,069 Alum. Diecast Bronze 85 Bi-directional CZ 1LA250M-4LN20-Z450 1200 5013 94.1 $90,234 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250T-6LN20-Z450 900 5810 94.1 $107,907 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258J-8LN20-Z500 3600 5011S 94.1 $71,239 Alum. DiecastConductivePlastic85 Uni-directional CZ 1LA250M-2LN20-Z500 1800 5011 94.1 $66,936 Alum. Diecast Bronze 85 Bi-directional CZ 1LA250M-4LN20-Z500 1200 5810 94.1 $102,358 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258H-6LN20-Z500 900 5812 94.1 $137,629 Copper Bar Bronze 80 Bi-directional CZ 1LA258L-8NN20-Z*Per IEEE841-2009, Table 2.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 1Part 5BPage 4Date 11/12Base List Prices, Frame, and FeaturesTEFC Enclosure per IEEE 841 Std- 2009 - continued(Order Code R61 / Category 2)AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C AmbientHP RPM FrameMin.Guar.FL EffBasicListPriceStd. RotorConstruction4000 VoltCoolingFanTyp.NoisedBARotation Type MRPD250 3600 509S 94.1 $61,974 Alum. DiecastConductivePlastic86 Uni-directional CZ 1LA250H-2LN50-Z250 1800 509 94.1 $60,407 Alum. Diecast Bronze 84 Bi-directional CZ 1LA250K-4LN50-Z250 1200 509 94.1 $63,170 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250M-6LN50-Z250 900 588 94.1 $93,187 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258E-8LN50-Z300 3600 509S 94.1 $62,861 Alum. DiecastConductivePlastic86 Uni-directional CZ 1LA250H-2LN50-Z300 1800 509 94.1 $62,302 Alum. Diecast Bronze 84 Bi-directional CZ 1LA250K-4LN50-Z300 1200 509 94.1 $64,939 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250M-6LN50-Z300 900 588 94.1 $93,851 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258F-8LN50-Z350 3600 509S 94.1 $64,003 Alum. DiecastConductivePlastic86 Uni-directional CZ 1LA250K-2LN50-Z350 1800 509 94.1 $63,159 Alum. Diecast Bronze 84 Bi-directional CZ 1LA250K-4LN50-Z350 1200 5011 94.1 $73,204 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250P-6LN50-Z350 900 588 94.1 $94,865 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258G-8LN50-Z400 3600 509S 94.1 $64,921 Alum. DiecastConductivePlastic86 Uni-directional CZ 1LA250L-2LN50-Z400 1800 5011 94.1 $65,665 Alum. Diecast Bronze 85 Bi-directional CZ 1LA250L-4LN50-Z400 1200 5011 94.1 $75,192 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250Q-6LN50-Z400 900 5810 94.1 $107,623 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258J-8LN50-Z450 3600 509S 94.1 $66,043 Alum. DiecastConductivePlastic86 Uni-directional CZ 1LA250L-2LN50-Z450 1800 5011 94.1 $67,453 Alum. Diecast Bronze 85 Bi-directional CZ 1LA250M-4LN50-Z450 1200 5013 94.1 $93,866 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250V-6LN50-Z450 900 5810 94.1 $111,570 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258K-8LN50-Z500 3600 5011S 94.1 $72,697 Alum. DiecastConductivePlastic85 Uni-directional CZ 1LA250M-2LN50-Z500 1800 5011 94.1 $68,341 Alum. Diecast Bronze 85 Bi-directional CZ 1LA250M-4LN50-Z500 1200 5810 94.1 $103,942 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258H-6LN50-Z500 900 5812 94.1 $146,744 Copper Bar Bronze 80 Bi-directional CZ 1LA258P-8NN50-Z*Per IEEE841-2009, Table 2.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 1Date 11/12Modifications & AccessoriesAdjustable Speed Drives (Except any TEFC Enclosure or any 2-pole in a6813 frame*)The MRPD designation for motors used with ASDs is indicated in the motor’s basic MRPD structure.Refer to the Section 1, Part MRPD for more details. Motors to be used with filtered VFDs and are 4:1 VT orare 2:1 CT have a minimum base Category 1.*Any rating in a TEFC enclosure or any 2-pole ratings in any enclosure in a 6813 frameare not suitable for use with an ASD application. Refer to your local Siemens Salesrepresentative for price and availability.Motors driven from an adjustable frequency control power source are subject to harmonicscaused by non-sinusoidal wave shapes and voltage spikes. These may result in increasedheating, decreased torque capability, and excessive shaft voltages; therefore, standard motordesigns may not be suitable. Refer exact requirements including application (variable orconstant torque), details of speed range, and type of inverter being used to your local SiemensSales representative for price and availability.Policy Statement IGBT/BRGSiemens Norwood AC Induction MotorsIGBT Control Induced Bearing CurrentsSiemens has had considerable, successful experience operating motors in the field inapplications that utilize IGBT-type adjustable frequency controls. Throughout the industry,however, a few variable frequency control applications and installations have been shown toproduce currents in the bearings of motors they control. Siemens Drives and Siemens Systemsgroups have the expertise and experience necessary to ensure the your installation isconfigured such that problem-free operation is attained. However, when Siemens motors are tobe used with controls manufactured other companies, we defer system configuration details tothat control manufacturer. If the application is such that a problem due to bearing currentscould potentially occur then one of the following solutions should be implemented with themotor and control system;a) Use of a control output filter that reduces common mode voltage and the motor non-driveend bearing should be insulated.b) For 500 frame and larger motors in non-hazardous locations, insulate the drive end andnon-drive end bearing and add a shaft grounding brush. Unless the grounding brush isprovided on the motor drive end, an insulated coupling must be utilized to protect noninsulatedbearings in the load equipment.Motors constructed in accordance with (b) are available. Consult your local Siemens Salesrepresentative for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 2Date 11/12Modifications & AccessoriesAltitude - Above 3300 FeetMotors are designed to operate within Class B temperature rise limits when operated at rated horsepower ataltitudes up to 3300 ft.Option Description Category List AdderFrom 3301 - 5000 ft elevation - Utilization to Class F 1 3%For operation above 5500 ft. altitude, refer to your local Siemens Sales representative for frame size and price.AmbientMotors are designed to operate within certain maximum temperature rise limits when the motor is operated inambient temperatures from 0 C to 40 C. For Class B rated motors, the limit is 80 C rise by resistance at 1.0service factor.Option Description Category List AdderFrom +40 o C up to +45 o C - Utilization to Class F 1 2%From +46 o C up to +50 o C - Utilization to Class F 1 4%NOTE: Sleeve bearings may require flood lubrication in an ambient above 40 degrees C. Consult your localSiemens Sales representative for determination of bearing lubrication requirement in ambient conditions above 40degrees C. Conversely, if a sleeve bearing motor is known to be subjected to temperatures below 0C, oil sumpheaters are required and should be added to price…See List Adder under Bearings - Oil Sump Heaters.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 3Date 11/12Modifications & AccessoriesAPI 541 – 3rd or 4th Edition (Please refer all inquiries to your local Siemens Salesrepresentative)API 547 – 2005 (Option Code R67 / Category 3)Motor priced and offered using the following pages will not bear the API Monogram®. A motor requiringthe application of the API Monogram® requires factory approval as well as receipt and review of the loadcurve, load inertia, and completed data sheets. Additional costs and lead time may be incurred.I. Basic ScopeRatings(hp)# Poles Voltage (V) Mounting Enclosures Rotor Mat'l Bearings Frames250 - 3000 4 - 8 2300 - 6600 Horizontal TEFC or WPIICopper> 1000 hp Sleeve 500 - 680< 800 2 2300 - 6600 Horizontal TEFC Aluminum Sleeve 500 - 580Aluminum

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 4Date 11/12Modifications & AccessoriesII. Siemens Standard Motor Features for API 547 - 2005Paragraph Accessory / Motor Feature Included2.1.1 1.0 Service factor on sine wave2.1.285 dB(A) @ 3 feet, unloaded, free-field, sine wave power, guaranteed (except as noted in thecomments section)2.2.2.7 Maximum 650% inrush current (based on NEMA inertia, standard centrifugal loads and FV starting)2.3.1 Class B Temperature @ 1.0 SF by Embedded Detector (RTD)2.4.1.2 & 2.4.1.3 300 series stainless steel screens2.4.1.2 d. Automatic drains (for TEFC motor only)2.4.1.3 Stainless steel filters & provisions for differential pressure switch (WPII enclosures only)2.4.2.2 & 2.4.2.4 Vertical jacking screwsMounting surface criteriaa. Mounting surface machined to 250 microinches2.4.2.7b. Same horizontal plane within 0.005"c. Foot flatness within 0.005"d. Different mounting planes within 0.002"/footf. Mounting surface shall be machined or spot-faced to a diameter of 2x the hole diameter2.4.4 300 series stainless steel hardwareCopper rotor with phosphor-free braze material for >1000 hp (Aluminum die-cast for

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 5Date 12/12Modifications & AccessoriesIII. API 547 – 2005 List Adders & Typical OptionsTotal Adder for API 547 - 2005 List Comments 1000 hp &

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 6Date 11/12Modifications & AccessoriesIV. Comments, Exceptions & Clarifications to API 547 - 20051. General: The pricing offered is for the base motor including Siemens standard routine (unwitnessed) testing.2. Para 1.2.a: Motors are quoted for 0 to 40 o C as standard. Oil sump heaters should be added for self-lube applicationsbelow 0 o C.3. Para 1.2.c: Motors are not suitable for offshore or severe corrosive duty as standard. Motor paint is Siemens standard ifnot otherwise specified.4. Para 2.1.2: Refer to the Section V. Noise Levels for API 547 – 2005 and make the appropriate exception per Note 1.5. 5. Para 2.2.2.3: Motor design is based on a 100% Square Curve which means the connected load torque varies as thesquare of the speed and is equal to 100% of the rated full load torque of the motor at rated speed. This is subject tochange upon receipt and review of load information.6. Para 2.4.1.2 TEFC) & 2.4.1.3 (WPII): If specified on Data Sheet or if installation is an offshore platform, we are takingexception to 316 stainless steel and offering 300 series stainless steel.7. Para 2.4.6: Refer to Section II. Siemens Standard Motor Features for API 547 – 2005 and add the following comment, “A"stiff-rotor" motor design will be supplied as the rotor does not have substantial vibration amplitude increase or shift inphase angle per resonance (natural frequency) definition in API 541, Appendix F, paragraph F.1.7.”8. Para 2.4.7.1.5: The bearings used on SH400, SH450, 880, SH560, SH562, or SH564 frames feature line-to-line toclearance fit by design.9. Para 2.4.7.2.1 (WPII only): Taking exception to IP55-rated external shaft seals.10. Para 2.4.7.3.1: The seals provided on TEFC motors are not split.11. Para 3.4: Motor space heaters are not removable.12. Para 4.1.2: Only stator & stator-mounted devices will be high-potential tested.13. Para 4.1.3.2: Non-contacting eddy current probe measurements will only be taken when the probes are purchased withthe motor. If only provisions for probes are purchased, the vibration limits per paragraph 4.1.3.1 shall apply.14. Para 4.2.1: The motor(s) offered will be provided with Siemens standard domestic packing. The motor(s) will not receivelong-term storage preparation. If long-term storage preparation is required, please advise and Siemens will offer at anadditional price.15. If Complete Test is added as a base feature or as an option, make the following comment: “Data Sheet 2 of 3, Line 32: Ano load bearing temperature run (4.1.2.h) is not provided as standard when a Complete Test is purchased. Siemensreserves the option to use the procedure per paragraph 4.3.3.10 for hot vibration evaluation."V. Noise Levels for API 547 - 2005Low Noise Values for API 547 - Guaranteed, No-load, Free-field, 3 feetWPII Enclosures500 Frame

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 7Date 11/12Modifications & AccessoriesAssemblyAs a standard, motors are supplied for horizontal, foot mounting and NEMA F-1 assembly.Code Option Description Category List AdderK10 F-1 Assembly 1 No ChargeK09 F-2 Assembly 1 No ChargeFor other mounting options, refer exact requirements to your local Siemens Sales representative price andavailability.Balance – Precision Balance for Low VibrationAll of our horizontal motors are designed to be within NEMA Standard vibration limits as a standard. NEMAStandards on vibration are defined in limits of unfiltered maximum velocity in inches per second (IPS) asmeasured on the bearing housing with motor on a rigid mounting. A precision balance with limits less than theNEMA limits is available per following chart.Precision BalanceMotorSpeedNEMAStandard LimitsPrecisionBalance Vibration Limits2-Pole .15 IPS .10 IPS4-Pole .15 IPS .10 IPS6-Pole .15 IPS .08 IPS8-Pole .12 IPS .07 IPS10-Pole .09 IPS .06 IPSCode Option Description Category List AdderR90 Precision Balance 1 $1,264Balance - SpecialTwo pole motors can be provided with special balance to obtain maximum vibration of 1 mil (.001 in.) peak-topeakas measured on the shaft with shaft stick or 1.5 mils peak-to-peak with velocity probes, if furnished withmotor.Code Option Description Category List AdderR91 Special Balance - 500 & 580 Frames 2 $4,619R91 Special Balance - All Other Frames 2 $7,363

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 8Date 11/12Modifications & AccessoriesBearings - InsulationCode Option Description Category List AdderL27 Non Drive End (NDE) Bearing Insulated – 500 Frame, 2 Pole 1 $1,770L18 Both Bearings Insulated except 500 & 580 Frames 2 $3,386L18 Both Bearings Insulated – 500 Frames, 2 Pole 2 $4,224L18 Both Bearings Insulated – 500 Frames, 4 Pole & slower 2 $2,114L18 Both Bearings Insulated – 580 Frame, TEFC (CZ) Enclosure 2 $2,602L18 Both Bearings Insulated – 580 Frame, All enclosures except TEFC 2 $2,719NOTE1: Insulating both bearings is not available if motor is for belt drive application.NOTE2: NDE bearing insulated is standard for 500 Frame, 4 Pole and slower.Bearings - Lubrication SystemsAs a standard, anti-friction bearing motors are grease lubricated and sleeve bearing motors are oil lubricated.Other lubrication options are available as follows:Code Option Description Category List AdderR32 Oil Site Gauge 2 $1,552R33 Constant Level Oilers; 1/Sleeve Bearing (Oil Rite) 2 $1,661L66 Provisions Only for Flood Lubrication; Sleeve Bearings 1 $1,221Bearings - Oil Sump HeatersFor operation of sleeve bearing motors at ambient temperatures below 0°C, oil sump heaters in either120V or 240V are required. Specify volts at time of order.Code Option Description Category List AdderR36Sump Heaters for Non-hazardous Areas (All Framesexcept 680, 880, SH560, SH562, or SH564 Frame) 2 $2,412R36Sump Heaters for Non-Hazardous Areas - 680, 880,SH560, SH562, or SH564 Frame)2 $4,224R36Sump Heaters for Hazardous Areas (All Frames except680, 880, SH560, SH562, or SH564 Frame)2 $6,232R36Sump Heaters for Hazardous Areas - 680, 880, SH560,SH562, or SH564 Frame)2 $7,437

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 9Date 11/12Modifications & AccessoriesBearing Protective Devices - MechanicalA. Vibration Switch - Intended for use with anti-friction bearing motors. The device is mounted on the motorframe. List Adder is for mounting of one device.Code Option Description Category List AdderR03 Robertshaw Model 365-A8 Vibraswitch 2 $3,023R03 Robertshaw Model 365-A8 Vibraswitch - Hazardous areas 2 $6,645R05 PMC / Beta 440 D-R 2 $4,677B. Seismic Devices – A vibration transducer system for measurement of acceleration or velocity is available.List Adder includes supply and mounting of one device at each bearing. List Adder for Provisions Onlyincludes Siemens standard procedure includes a mounting block with a 2-1/2 inch diameter spot-face hole fordevice. Refer details of device to be used to your local Siemens Sales representative for review by factoryprior to order acceptance.Code Option Description Category List AdderR06 Acceleration Transducer System – Accelerometers; Bently-Nevada 2 $8,335R07 Velocity Transducer System – Velometers; Bently-Nevada 2 $7,737R08 Provisions Only for Vibration Transducers – Siemens Standard 1 $1,264C. Velocity Vibration Probes - For use with sleeve bearing motors only. List Adder includes installation ofprobes, proximeters, and cable wired to a common auxiliary terminal box.Code Option Description Category List AdderA02 Two Radial Probes on Each Bearing; Bently-Nevada 3300 Series 8mm 1 2 $28,196R00 Installation of One Phase Monitoring Probe 2 3 $8,642A39 Provisions Only for up to 2 Radial Probes per Bearing 2 $7,330R02 Provisions Only for 1 Phase Monitoring Probe 2 3 $3,3561 Internally-mounted radial probes or provisions for them are standard for all motors exceptType CZ – 580 frame and larger. When Type CZ – 580 frame and larger motors are supplied withvibration probes or provisions for vibration probes, the "BA" and "C" dimensions will increase. Consult your localSiemens Sales representative or refer to the latest version of Dimension Prints for Above NEMA Motors ANSS-60000 for exact dimensions.If externally-mounted mounted probes or provisions for them are required on motors where internally-mounted isstandard, refer requirements to your local Siemens Sales representative for price and availability.2 Only available if purchased in conjunction with Code A02 – Two Radial Probes on Each Bearing.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 10Date 11/12Modifications & AccessoriesBearing Protective Devices - TemperatureOnly one type of temperature device can be provided per bearing.A. Resistance Temperature DetectorsBearing RTD's are available per the following chart. Stick-type are available for either anti-friction bearing or sleeve bearings.Embedded-type are available for sleeve bearing only.Code Option Description Category List AdderR79(2) 100 Ohm Platinum (0.00385 TCR) DIN Std, single-element RTDs,3-wire, 1/brg, stick-type 2 $2,534A42(2) 100 Ohm Platinum (0.00385 TCR) DIN Std, dual-element RTDs,3-wire, 1/brg, stick-type 1 $3,060B10E(4) 100 Ohm Platinum (0.00385 TCR) DIN Std, dual-element RTDs,1/brg, stick-type 1 $6,122R76(2) 100 Ohm Platinum (0.00385 TCR) DIN Std, single-element RTDs,3-wire, 1/brg, Embedded per API – sleeve bearings only 2 $4,058R09(2) 100 Ohm Platinum (0.00385 TCR) DIN Std, dual-element RTDs,3-wire, 1/brg, Embedded per API – sleeve bearings only 2 $4,650B10F(4) 100 Ohm Platinum (0.00385 TCR) DIN Std, dual-element RTDs,3-wire, 2/brg, Embedded per API – sleeve bearings only 2 $9,299R18(2) 10 Ohm Copper (0.00427 TCR), single-element RTDs, 3-wire, 1/brg,stick-type 2 $2,534R20(2) 10 Ohm Copper (0.00427 TCR), dual-element RTDs, 3-wire, 1/brg,stick-type 2 $3,060R19(2) 10 Ohm Copper (0.00427 TCR), single-element RTDs, 3-wire, 1/brg,Embedded – sleeve bearings only 2 $4,058R21(2) 10 Ohm Copper (0.00427 TCR), dual-element RTDs, 3-wire, 1/brg,Embedded – sleeve bearings only 2 $4,650R24(2) 120 Ohm Nickel (0.00672 TCR), single-element RTDs, 3-wire, 1/brg,stick-type 2 $2,534R26(2) 120 Ohm Nickel (0.00672 TCR), dual-element RTDs, 3-wire, 1/brg,stick-type 2 $3,060R25(2) 120 Ohm Nickel (0.00672 TCR), single-element RTDs, 3-wire, 1/brg,Embedded – sleeve bearings only 2 $4,058R27(2) 120 Ohm Nickel (0.00672 TCR), dual-element RTDs, 3-wire, 1/brg,Embedded – sleeve bearings only 2 $4,650R13 Provisions only for bearing RTDs or thermocouples, 2/brg 1 $293R22Spring loaded fittings (for bearing RTDs or thermocouples stick typeonly) 1 $827R17Stainless steel shielding for bearing RTDs (available only ifpurchased in conjunction with Bearing RTDs) 2 $565

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 11Date 11/12Modifications & AccessoriesBearing Protective Devices – Temperature (continued)B. ThermocouplesBearing thermocouples are of the dual element type in a stainless steel sheath. List Adder includes supplying onethermocouple at each bearing. Stick-type are available for either anti-friction bearing or sleeve bearings. Embedded-type areavailable for sleeve bearing only.Code Option Description Category List AdderR11(2) Type EE chromel-constantan, dual-element thermocouples, 1/brg,stick-type 2 $1,560R75(2) Type EE chromel-constantan, dual-element thermocouples, 1/brg,Embedded – sleeve bearings only 2 $1,754R28(2) Type JJ iron-constantan, dual-element thermocouples, 1/brg, sticktype3 $1,949R29(2) Type JJ iron-constantan, dual-element thermocouples, 1/brg,Embedded – sleeve bearings only 3 $2,193R34(2) Type KK chromel-alumel, dual-element thermocouples, 1/brg, sticktype3 $1,949R35(2) Type KK chromel-alumel, dual-element thermocouples, 1/brg,Embedded – sleeve bearings only 3 $2,193R37(2) Type TT copper-constantan, dual-element thermocouples, 1/brg,stick-type 3 $1,949R38(2) Type TT copper-constantan, dual-element thermocouples, 1/brg,Embedded – sleeve bearings only 3 $2,193R13 Provisions only for bearing RTDs or thermocouples, 2/brg 1 $293R22Spring loaded fittings (for bearing RTDs or thermocouples stick typeonly) 1 $827C. Thermometer – Dial-Type (For Sleeve Bearing Only)Standard dial type thermometers are available for sleeve bearing units only in all frames except SH400, SH450, 880, SH560,SH562 or SH564 frames. They are capillary-type and are available with or without contacts. Standard operating range istypically 0 C to 120 C. List Adder includes supplying one thermometer at each bearing.Code Option Description Category List AdderA70 Dial-type bearing thermometers, capillary-type, without contacts 3 $6,884A71 Dial-type bearing thermometers, capillary-type, with contacts 3 $8,175R13 Provisions Only for One (1) per Bearing Temperature Device 1 $293D. Temperature Relay (For Sleeve Bearing Only)Standard bearing temperature relays are either indicating type or non-indicating type. List Adder includes supplying one relayat each bearing.Code Option Description Category List AdderR42 Non-indicating bearing temperature relays (Remote Display Only) 3 $7,745R41 Indicating bearing temperature relays (Local Display Only) 3 $8,605R13 Provisions Only for One (1) per Bearing Temperature Device 1 $293

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 12Date 11/12Modifications & AccessoriesBearings - SleeveBasic List Prices may be modified with the appropriate adder to provide sleeve bearings where anti-frictionbearings are standard.Code Option Description Category List AdderK96 500 Frames; Open Enclosures 1 $6,027K96 580 Frames; Open & TEAAC Enclosures 1 $8,148K96 500 Frames; TEFC Enclosures 1 $9,996K96 580 Frames; TEFC Enclosures 1 $12,124K96SH400 - SH450 – 880 – SH560 - SH562 - SH564 Frames; TEFCEnclosures 2 $28,200Sleeve bearings are generally self-cooled, oil ring lubricated but some require external flood lubrication. See thefollowing Lubrication Table for standard lubrication requirements based on a maximum 40 degrees C ambient and60 hertz operation. Consult your local Siemens Sales representative for ambient temperatures above 40 degreesC, other than 60 hertz operation, and/or for self-cooling of bearings where flood lubrication is standard. Thoseunits requiring flood lubrication are supplied with provisions only. Refer oil supply pressure, type of oil, andlocation of provisions (F1 or F2 side) to your local Siemens Sales representative for review by factory prior toorder acceptance.Sleeve Bearing Lubrication Table3600 RPM 1800RPM 1200 RPM and slowerEnclosure OPEN TEFC TEAAC OPEN TEFC TEAAC ALL500 Frame S S - S S - S588/5810 Frame S S F* S S S S5812 Frame S F* F* S S S S680 Frame S - F* S S - SSH400 Frame - F* - - S - SSH450 Frame - F* - - S - S880 Frame - F* - - F* - SSH560/SH562/SH564FrameFSOPEN refers to ODP, WPI, or WPII enclosure.S = Self lubricated F* = Flood lubrication required*NOTE: Self cooling of bearings may be possible on ratings where flood lubrication is required. Refer all details to yourlocal Siemens Sales representative for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 13Date 11/12Modifications & AccessoriesBelt Drive ApplicationsMotors to be used on belt drive applications have a larger shaft extension diameter and length than direct drivemotors and have a roller bearing on the drive end. Motors with a ball bearing on the drive end should not be usedon belt drive applications. Conversely, it is not recommended that motors with a roller bearing on the drive end bedirect driven as excessive noise may occur. The chart indicates the minimum sheave diameters in inchesrecommended for belt drive motors in 500 and 580 frames. The adder can only be made to the ratings listed in thechart. For any drive applications falling outside of chart limitation, refer exact requirements to your local SiemensSales representative for review by factory for price and availability. (List Adder does not include slide rails, seeSoleplates/Slide Rails for appropriate addition.)Code Option Description Category List AdderR92 Modification for Belt Drive Applications 1 $2,014Minimum Motor Sheave Pitch Diameter500 FRAMEODP / WPI WPII TEFCHP 4 pole 6 pole 8 pole 4 pole 6 pole 8 pole 4 pole 6 pole 8 pole200 12.0 14.0 15.5 12.0 14.0 15.5 12.0 14.0 15.5250 13.0 15.0 16.5 13.0 15.0 19.0 13.0 15.0 16.5300 14.0 16.0 17.0 14.0 17.0 23.0 14.0 16.0 -350 14.5 16.5 19.5 14.5 20.0 26.5 14.5 16.5 -400 15.0 19.0 22.5 16.0 23.0 30.5 15.0 18.0 -450 16.5 20.5 - 18.0 25.5 - 16.0 - -500 18.5 23.0 - 20.0 28.5 - 17.0 - -600 22.0 27.5 - 24.0 34.0 - - - -700 24.5 - - 24.5 - - - - -800 27.5 - - 28.0 - - - - -900 31.0 - - 31.5 - - - - -580 FRAMEODP / WPI /WPII TEFC TEAACHP 4 pole 6 pole 8 pole 4 pole 6 pole 8 pole 4 pole 6 pole 8 pole200 - - - - - 15.5 - - -250 - - - - - 16.5 - - -300 - - 17.5 - 16.0 17.5 - - 17.5350 - - 18.5 - 16.5 18.5 - - 18.5400 - - 19.5 15.0 17.5 19.5 - - 19.5450 - 18.0 20.0 16.0 18.0 20.0 - 18.0 20.0500 16.5 19.0 20.5 16.5 19.0 - 16.5 19.0 20.5600 17.5 20.0 - 17.5 20.0 - 17.5 20.0 -700 18.5 - - 18.5 - - 18.5 - -800 - - - 19.0 - - - - -

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 14Date 11/12Modifications & AccessoriesCancellation ChargesA minimum charge of 10% of the order value will be assessed for any order cancellation. For any order less than$ 5,000 (e.g. a parts order), a minimum charge of $ 500 (five hundred U.S. dollars) will be assessed for any ordercancellation.The following graph will apply to determine cancellation charges after the order is received and entered at thefactory.CANCELLATION CHARGES100%90%% OF SELLING PRICE80%70%60%50%40%30%20%10%0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%% OF COMPLETIONA charge of 15% (fifteen percent) of the total motor price will be assessed if an order is canceled after it has beenreleased for engineering and drafting whether or not the drawings have been completed and/or submitted forapproval.Chipper / Crusher DrivesThese special requirements often include higher than standard inertia and/or torque requirements.Refer such applications to your local Siemens Sales representative for review by factory for frame, pricing andavailability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 15Date 11/12Modifications & AccessoriesCouplingsList Adder includes mounting only of shrink-fit, customer-supplied coupling which has been finish-bored and keyseatedto our standard shaft dimensions. Couplings are to be sent freight prepaid to arrive at the factory at leastsix (6) weeks prior to scheduled shipment.Code Option Description Category List AdderL17 Mounting of Customer-Supplied, Machined & Balanced 1/2 Coupling 2 $3,386NOTE: Mounting of couplings to special shaft dimensions or hydraulic couplings require procedures that vary withindividual couplings. Refer to your local Siemens Sales representative for review by factory for availability andpricing.Current Transformers*NOTE: Refer to Terminal Box elsewhere in this section for pricing options.Differential Pressure SwitchDwyer Instruments Model No. 1950-1 integral type, explosion-proof pressure switch can be furnished with filteredmotors to measure pressure drops across the filter caused by clogging of particles in the filter.Code Option Description Category List AdderS35 Differential Pressure SPDT Switch 1 $1,957S36 Differential Pressure Gauge 3 $1,591Direction of RotationRefer to Basic List Prices of rating. Those ratings indicated as “Uni-directional” in the “Rotation” column willrequire a direction of rotation (Option Code K97 or K98) to be specified at time of order placement.Code Option Description Category List AdderK97 Clockwise Viewed from Motor Drive End 1 No ChargeK98 Counter-Clockwise Viewed from Motor Drive End 1 No ChargeK99 Bi-Directional Rotation 1 No ChargeEfficiency – Higher Than StandardFor a special high efficiency design refer exact requirements to your local Siemens Sales representative for priceand availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 16Date 11/12Modifications & AccessoriesExport PackagingFor motors to be export packaged per Siemens standard for overseas shipment…List Adder 6% to the totalmotor price. Please add 5 working days to the standard lead-time for export boxing. See Shipment Terms &Packaging for additional information.Fan - External CoolingThe chart below indicates standard cooling fan materials for TEFC (CZ & CGZ) and TEAAC (CAZ). Also indicatedis price for alternate material.Frame & Type (Enclosure) Speed Standard Material Rotation500 CZ (TEFC) 2-Pole Aluminum Uni-directional580 CZ (TEFC)Aluminum hub with nonmetallic*blades2-PoleUni-directional500 CZ (TEFC)&4-Pole &580 CZ (TEFC)slowerAluminumBi-directionalSH400/SH450/880 CGZ** (TEFC) 2-PoleAluminum hub with nonmetallic*bladesUni-directionalSH400 CGZ** (TEFC)4-Pole &slowerAluminumBi-directionalSH450/880 CGZ** (TEFC)4-Pole &slowerAluminumAll Frames CAZ (TEAAC) All Aluminum Uni-directionalSH560/SH562/SH564 1LA4Steel hub with nonmetallic*blades2-Pole(TEFC)Uni-directionalSH560/SH562/SH564 1LA44-Pole &(TEFC)SlowerSteelUni-directionalFrame & Type (Enclosure) Speed Standard Material Rotation500 CZ (TEFC) 2-Pole Aluminum Uni-directional580 CZ (TEFC)Aluminum hub with nonmetallic*blades2-PoleUni-directional500 CZ (TEFC)&4-Pole &580 CZ (TEFC)slowerAluminumBi-directionalSH400/SH450/880 CGZ** (TEFC) 2-PoleAluminum hub with nonmetallic*bladesUni-directionalSH400 CGZ** (TEFC)4-Pole &slowerAluminumBi-directionalSH450/880 CGZ** (TEFC)4-Pole &slowerAluminumAll Frames CAZ (TEAAC) All Aluminum Uni-directionalSH560/SH562/SH564 1LA4(TEFC)SH560/SH562/SH564 1LA4(TEFC)2-Pole4-Pole &SlowerSteel hub with nonmetallic*bladesSteelUni-directionalUni-directionalFrame & Type (Enclosure) Speed Standard Material Rotation500 CZ (TEFC) 2-Pole Aluminum Uni-directional580 CZ (TEFC)Aluminum hub with nonmetallic*blades2-PoleUni-directional

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 17Date 11/12Modifications & Accessories500 CZ (TEFC)&580 CZ (TEFC)SH400/SH450/880 CGZ** (TEFC)4-Pole &slower2-PoleAluminumAluminum hub with nonmetallic*bladesBi-directionalUni-directionalSH400 CGZ** (TEFC)4-Pole &slowerAluminumBi-directionalSH450/880 CGZ** (TEFC)4-Pole &slowerAluminumAll Frames CAZ (TEAAC) All Aluminum Uni-directionalSH560/SH562/SH564 1LA4Steel hub with nonmetallic*blades2-Pole(TEFC)Uni-directionalSH560/SH562/SH564 1LA44-Pole &(TEFC)SlowerSteelUni-directionalCode Option Description Category List AdderS50 Anodized Aluminum Fan for 500 & 580 Frame, 2-Pole TEFC Only 2 $1,412S51 Bronze Fan for 500 & 580 Frame, TEFC Only 2 $3,215S85 Steel Fan, Uni-Directional for All CAZ (TEAAC) 2 $1,492*Non-metallic blades may be polypropylene, polyamide, or vestamide. Consult your local Siemens Salesrepresentative for exact material.**Refer to the your local Siemens Sales representative for review by factory for alternate materials forSH400/SH450/880/SH560/SH562/SH564 TEFC frames.Fan HousingStandard fan housing on TEFC 500 & 580 frame motors is cast-iron. All other frame sizes have steel fanhousings.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 18Date 11/12Modifications & AccessoriesFiltersAll WPII motors have standard provisions for addition of filters. Various types of filters can be supplied as optionalequipment on WPII motors. For filters on ODP or WPI enclosures, consult your local Siemens Salesrepresentative. The standard filters below have an option Category 1.FiltersCode Filter Material Category List Adder500 Frame 580 Frame 680 FrameS30 Galvanized Steel 1 $992 $1,064 $1,408S31 Aluminum 1 $924 $1,221 $2,015S32 Stainless Steel 1 $1,864 $2,364 $3,368NOTE: Other filter media is available. Refer exact requirements to your local Siemens Sales representative forprice and availability.FlangesThe MRPD designation for D-flange mounting is indicated in the motor’s basic MRPD structure. Refer tothe Section 1, Part MRPD for more details.A D-flange is available for 500 and 580 frames in a ball bearing, single shaft, and direct connected applicationonly. The D-flanged motor requires foot-mounted support. The D-flange is available for all enclosures in BasicList Prices. D-Flange is available per NEMA Standards or as Custom. The Custom D-Flange would requirereceipt and review of customer-supplied drawing by your local Siemens Sales representative for review by factoryprior to order acceptance.D-Flange per NEMA StandardCode Category Frame List AdderR60 2 500 $3,712R60 2 580 $5,993Custom D-Flange (Customer drawing required)R59 2 500 $3,712R59 2 580 $5,993FreightAs a standard motors are sold FCA-Loaded factory, freight collect with domestic packing only.Frequency - 50 HertzFor 50 hertz ratings not found in the Basic List Price section, increase required HP by a factor of 1.2 and round upto the nearest comparable 60 hertz rating. (Example: To find 400HP - 50 hertz rating, multiply 400HP x 1.2 =480HP. Use comparable 500HP - 60 hertz rating). See Voltage in this section for proper Basic List Priceselection.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 19Date 11/12Modifications & AccessoriesGround PadsCopper ground pads on motor frames.Code Option Description Category List AdderR54 Copper Ground Pads on Frames 1 $351HardwareStandard external hardware is 300 series stainless steel for all enclosures. Also available is #316 stainless steelfor all enclosure bolts, studs, and other fastening devices up through 0.5-inch (M12) size. For other specifichardware requirements refer to your local Siemens Sales representative for pricing and availability.Code Option Description Category List AdderR46 Stainless Steel #316 Hardware 3 $4,302Hazardous Location / Temperature CodeThe MRPD designation for Division 2 areas is indicated in the motor’s basic MRPD structure. Refer toSection 1, Part MRPD for more details.Division 2 - For Class I, Groups B, C, and/or D use appropriate list price and frame for the customer-specifiedenclosure for 1.0 service factor. The motor will meet NEC Article 500 definition for motors permitted in theClass I, Group(s), Division 2 area(s). NEC requirements and restrictions must be observed. Certification of themotor for use in the Division 2 area is not normally provided.Temperature Code: Most ratings are available as a T3 temperature code as defined by NEC. For designs tomeet other temperature codes as low as T4 refer exact requirements to your local Siemens Salesrepresentative for review by factory for price and availability.Code Option Description Category List AdderD40 CSA Label for Class 1, Group D, Division 2 Only 1 $234For 1.15 service factor see Service Factor elsewhere in this section for proper sizing.NOTE: The applicable Class(es) and Group(s) must be specified in the quotation and at time of order. For otherclasses and groups, refer exact requirements to your local Siemens Sales representative for review by factory forprice and availability. Division 2 motors intended for adjustable speed drive application should be referred to yourlocal Siemens Sales representative for review by factory.IEEE 841 Std-2009 (Order Code R61 / Category 2)See Base List Prices, Frame, and Features Section 5B for price, availability, and comments on motors perIEEE841-2009 specification.Inrush Current - Lower than StandardTypical standard inrush currents for most ratings is a maximum 650%. Lower inrush currents are available. Thiswill affect other performance characteristics such as locked rotor torque or breakdown torque. Refer exactrequirements to your local Siemens Sales representative for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 20Date 11/12Modifications & AccessoriesInsulationMotors are supplied with a class F insulation system as standard.Load InertiaThe table below lists load inertia values which our standard, polyphase motors can accelerate without injurioustemperature rise under the following conditions:1. Rated voltage and frequency applied at the motor terminals.2. During accelerating period, connected load torque shall be equal to, or less than, a torque which varies assquare of the speed and is equal to 100% of full-load torque at rated speed.3. Two successive starts with motor at ambient temperature, or one start with motor not exceeding ratedtemperature. Subsequently, the number of permissible starts will depend upon the time required to acceleratethe load from stand still to full speed, the thermal capacity of the motor, and the time required for the motortemperature to return to rated temperature after each such start.Driven equipment requiring higher than standard load inertia may require a larger frame size and/or special rotordesigns. Refer exact requirements to your local Siemens Sales representative for price and availability.Standard Load Inertia (lb.-ft. 2 ) Exclusive of Motor InertiaHPRPM3600 3000 1800 1500 1200 1000 900 720200 86 135 831 1304 2238 3496 4508 7750250 105 165 1017 1590 2744 4282 5540 9530300 123 193 1197 1874 3239 5060 6540 11270350 141 221 1373 2152 3723 5820 7530 12980400 158 249 1546 2425 4199 6570 8500 14670450 175 275 1714 2692 4666 7300 9460 16320500 191 301 1880 2955 5130 8030 10400 17970600 222 352 2202 3467 6030 9450 12250 21190700 252 400 2514 3964 6900 10840 14060 24340800 280 446 2815 4447 7760 12200 15830 27440900 308 491 3108 4918 8590 13520 17560 304801000 334 534 3393 5380 9410 14820 19260 334701250 395 4073 11380 23390 407401500 451 4712 13260 27350 477501750 502 5310 15060 311702000 548 5880 16780 348602250 590 6420 184402500 628 6930 200303000 694 78603500 746 87004000 785 94604500 813 101205000 831 10720

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 21Date 11/12Modifications & AccessoriesNoise RequirementsTypical no load, free field noise levels of standard design motors are shown below. For guaranteed levels, add 2dba to the levels below those shown in the following chart. For 50HZ motors, deduct up to 4 dba but total dba withdeduction is to be no lower than 80 dba.Typical Overall Level 'A' Scale (dbA at 1 Meter)Enclosure Frame 3600 RPM 1800 RPM 1200 RPM 900 RPM & Slower508 91 84 85 855010 89 84 85 82588 81 83 85 83ODP/ WPI5810 80 83 85 825812 83 83 85 836811 84 81 85 856813 86 83 85 85WPIITEFC508 81 80 82 825010 80 81 82 82588 80 82 85 835810 81 80 82 815812 82 81 85 826811 83 80 86 826813 83 82 82 82509 86 84 80 805011 85 85 80 805013 88 88 80 80588 87 86 80 805810 87 86 80 805812 87 86 80 80SH400 85 82 81 80SH450 84 84 86 80880 85 89 85 81SH560/SH562/SH564 88 87 83 81588 87 82 82 825810 90 82 82 82TEAAC5812 90 81 82 826811 89 84 82 826813 87 84 82 82NOTE: Lower noise levels may be available. Lower noise level designs may affect motor dimensions. Referrequirements to your local Siemens Sales representative for details, price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 22Date 11/12Modifications & AccessoriesPaint SystemsNorwood’s Standard Duty Paint System is a two-part epoxy system in Motor Blue. Refer to the adder below forSiemens Harsh Duty Paint System and Extreme Duty Paint System.CodeOption DescriptionAdditionalWorking List AdderWeeks*S03 Harsh Duty Painting System, Standard Color 1 $4,541S07Extreme Duty Painting System, Standard Color –(All except WPII Enclosure in Frames 5810, 5812, 6811 & 6813)2 $19,791S07Extreme Duty Painting System, Standard Color –WPII Enclosure, Frame 58102 $25,643S07Extreme Duty Painting System, Standard Color –WPII Enclosure, Frame 58122 $24,517S07Extreme Duty Painting System, Standard Color –WPII Enclosure, Frame 68112 $20,979S07Extreme Duty Painting System, Standard Color –WPII Enclosure, Frame 68132 $24,462S13 Standard Duty Painting System with Black Color RAL9005 0 $1,694Y53 Other Colors (Requires Additional Clarification - Munsell or RAL #) 1 $1,694*If purchased, these Additional Working Weeks must be added to any published motor Lead Times.Rotor Construction / Corrosion ProtectionThe MRPD designation for Copper-bar Rotors is indicated in the motor’s basic MRPD structure. Refer toSection 1, Part MRPD for more details.See Basic List Prices section for standard rotor construction of rating. When a fabricated copper bar rotor isrequired by specification, use the following List Adder on the rating where a die cast aluminum rotor constructionis shown as standard.Copper Bar Rotor – Category 2Category Frame List Adder2 508 - 5013 $18,2742 588 - 5810 $21,9272 5812 $24,367Code Option Description Category List AdderS02 Corrosion Protection for the Rotor 1 $1,884

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 23Date 11/12Modifications & AccessoriesService FactorFor 1.15 service factor to accommodate overload conditions above rated horsepower, make the following list priceadditions to the basic motor price*.Option DescriptionCategory1.15 SF / Class F Temperature Rise 1 Use Same HP Rating1.15 SF / Class B Temperature Rise 2 Next Larger HP***For non-hazardous locations only. For Division 2 locations, size motor by increasing required HP by 1.15 andround up to nearest HP.**Size motor by increasing required HP by 1.15 and round up to nearest HP.Shaft ExtensionStandard shaft extension is a short shaft for direct connection. If specified at time of order, 4-pole and slower ballbearing motors can be supplied with a long shaft for direct connection at no charge. The long shaft is standard forbelt drive application (See Belt Drive Applications elsewhere in this section).For special shaft extension, tapered or threaded shafts, double shaft extensions on TEFC or TEAAC motors, stubshafts on two-pole compressor motors, shafts longer than 20", special shaft material or other variations, referexact requirements to your local Siemens Sales representative for review by factory for price and availability.Customer must furnish taper gages.Shaft Seal (Code R87,R88 / Category 2)A shaft seal is sometimes referred to as a shaft slinger or shaft flinger. All anti-friction bearing motors are suppliedwith a rubber, V-ring, external shaft seal as standard on all enclosures. For alternate rotating shaft seal* on driveend of any enclosure, see chart below.Rotating Shaft Seal – Category 2Frame Drive End List Adder Both Ends List Adder500 Code R87 $1,267 Code R88 $2,540580 Code R87 $1,869 Code R88 $3,739SH400 Code R87 $2,171 Code R88 $4,337680-SH450 Code R87 $2,659 Code R88 $4,842880/SH560/SH562/SH564 Code R87 $2,659 Code R88 $5,318*When motors are supplied with rotating shaft seal(s), the "BA" and "C" dimensions may increase. Consult factoryfor exact dimension.All sleeve bearing motors are supplied with aluminum, labyrinth-type shaft seals. Alternate materials are available,refer exact requirements to your local Siemens Sales representative for price and availability.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 24Date 11/12Modifications & AccessoriesShipment Terms & PackagingStandard shipment terms are FCA Loaded, Norwood, OH factory, freight collect with our standard domesticpackaging only. Contact your local Siemens Sales representative for other Incoterms.Software PackagesSoftware will be in our standard format and submitted electronically in the medium indicated unless expresslynegotiated and entered as a separate line item on the purchase order. Our standard software package includesthe following in *.pdf format;a) motor outline drawingb) the calculated motor electrical performance data including speed vs. torque, speed vs. current, andthermal limit curvesc) motor instruction manuald) Our standard commercial test reportAdditional software options; Shaft details data for purposes of torsional analysis...List Adder $605 (Option Code = U68). Seismic analysis per item per location...List Adder $7,054 (Option Code = U66).Supplying software with additional information, in customer-specified formats, and/or in alternative electronicformats may be accommodated. Refer to Norwood Product Lead Times ANCM-70000-xxxx for software anddocumentation lead times and offerings.Soleplates / Slide Rails / ShimsCode Option Description Category List AdderR93 Norwood Standard 2-piece Soleplates (500 & 580 Frames) 2 $8,811R93 Norwood Standard 2-piece Soleplates (All Other Frames) 2 $10,583R94 Soleplates with prov. for horizontal jackscrews (500 & 580 Frames) 3 $15,489R94 Soleplates with prov. for horizontal jackscrews (All Other Frames) 3 $25,814R95 Slide Rails for 500 & 580 Frames 2 $5,074R98 Stainless Steel Shims (Siemens Standard – 500 & 580 Frames) 1 $2,059R98 Stainless Steel Shims (Siemens Standard – All OtherFrames) 1 $3,084R96 Vertical Jacking Screws 1 $234For special custom made adapter bases to match motor to existing equipment, refer exact details to factory foravailability and pricing.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 25Date 11/12Modifications & AccessoriesSpace Heaters120/240 Volt, single phase space heaters with max. sheath temperature of 200 o C are standard on all WPII motorsand are available as optional equipment on other enclosures. Heaters include leads wired to an auxiliary boxmounted on the motor. Other voltages are available and exact requirements should be referred to your localSiemens Sales representative for price and availability.Code Option Description Category List AdderR40 120/240 Volt, Single-Phase - Low Temp. (200 o C) 1 $1,380Starting - Reduced Voltage/Soft StartStandard motors are designed for starting at 100% of nameplate voltage. Motors can accelerate normal loads atreduced voltage starting provided the voltage does not dip below 90% of rated voltage at the motor terminals.For soft start or starting on voltages at less than 90% of rated voltage, special electrical designs may be required.Refer complete details of load to be accelerated (driven equipment speed vs. torque curve and load inertia),available voltages, and any other requirements to your local Siemens Sales representative for price andavailability.Startup AssistanceField Engineering Services are not included in any of the prices of this pricing guide. We do offer completeinstallation, field engineering assistance, startup, and repair services. If any of the services are required or formore details on these services, please contact the Siemens Technical Support Communication Centerat 1-800-333-7421.Stator - ConnectionsFor wye-delta connections*, three leads are provided as standard on single voltage motors, six leads are providedas standard on dual voltage motors.Code Option Description Category List AdderS10 Wye-Delta Connection* - for Low Voltage Motors Only 2 $2,643S11 Heavy-Duty Bracing (500 & 580 Frames) 2 $1,053S11 Heavy-Duty Bracing (All Other Frames) 2 $1,408S16 Longer Than Standard Leads - Up to a Maximum 60 Inches 2 $872

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 26Date 11/12Modifications & AccessoriesStator - Insulation/TreatmentsGenerally, most low voltage motors have random wound coils with a polyester varnish type insulation. All motors2300 volt and above have form wound stator coils with Siemens’ standard VPI insulation system. For form wound460 volt system, use list price and frame of comparable 2300 volt rating. Performance data may vary slightly frompublished data. All insulation systems are class F, non-hygroscopic and are supplied with EPDM rubber leadcable. Because of some environmental conditions, additional stator treatments are available. An anti-fungustreatment (tropicalization) is for humid areas and an anti-abrasion treatment is for areas that may contain abrasiveparticles that may circulate inside a motor. Anti-abrasion treatment is for ODP, WPI, or WPII enclosures only.Code Option Description Category List AdderS00 Anti-fungus protection for the stator – 500 Frames 1 $377S00 Anti-fungus protection for the stator – All other Frames 1 $627S01 Anti-abrasion treatment for the stator – 500/580 Frames 1 $1,825S01Anti-abrasion treatment for the stator – 680/SH400/SH450Frames 1 $2,032S01Anti-abrasion treatment for the stator –880/SH560/SH562/SH564 Frames 1 $2,441Stator - Protective DevicesA. Resistance Temperature Detectors - Standard RTD options include a set of six, 3-wire RTD's with Tefloninsulated, #22-gauge leads which meet IPTS-68 Standard.Code Option Description Category List AdderR65 (6) 100 Ohm Platinum RTDs; 2/phase 1 $1,377R17304 Stainless Steel Shielding for Stator RTDs (availableonly if purchased in conjunction with Stator RTDs) 2 $565B. Thermistors - Standard thermistor option includes three Texas Instrument positive temperature coefficient(PTC) type sensors to be used with a Texas Instruments control module. Standard control module is manualreset type with trip indicator, 120 Volt single channel input. Modules with alarm channel are available atadditional premium. Standard switch temperatures are 135 C, 155 C or 180 C.Code Option Description Category List AdderA16 Thermistors - (6) PTC – 2/phase 1 $1,509R14 PTC control module 1 $728C. Thermostats - Texas Instruments (Klixon*) thermostats can be furnished with either normally-open ornormally-closed contacts wired to main terminal box.Code Option Description Category List AdderR15 Thermostat - (2) TI Klixon; normally open contacts 2 $507R16 Thermostat - (2) TI Klixon; normally closed contacts 1 $507

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 27Date 11/12Modifications & AccessoriesTerminal Boxes / Differential & Surge Protection / Current Transformers /Standoff InsulatorsAuxiliary BoxesOur standard, cast-iron auxiliary boxes meet NEMA 4X requirements and is segregated to house space heaterand temperature instrumentation leads if those devices are purchased. Stainless steel is an option.Code Option Description Category List AdderM51 Auxiliary Box - Stainless Steel 2 $2,341Separate Box for Temperature Instrumentation (separate fromM52 space heater box)2 $842Main Terminal BoxA – Main Terminal Box SizeThe standard main terminal box is selected on the basis of full load current of the motor and exceeds NEMAvolume requirements (see table below). The standard main terminal box location is NEMA F-1 unless specifiedotherwise at time of order (See Assembly elsewhere in this section).HP 460 V or 575 V

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 28Date 11/12Modifications & AccessoriesUse the following table to determine minimum main terminal box size for additional features and add for theadditional features as listed below.Additional FeaturesMinimum Box Required(1) Ammeter CT FS1.5 (a),(b)(3) Current Transformers FS2 (a)Surge ProtectionFS3 (c)Standoff InsulatorsFS1.5 (b)(a)Ametering current transformer and (3) current transformers together requires FS3 box.(b)Ametering current transformer and standoff insulators together require minimum FS2 box.(c)FS3 terminal box will accommodate any combination of the Additional Features listed above.B – Current Transformers / Differential ProtectionList Price does not include main terminal box. Add for the appropriate main terminal box under “Main TerminalBox”.Code Option Description Category List AdderU96 (1) Ammeter CT (either Main or Neutral Lead - clarification text required) 2 $1,464U90 (3) CT's for Differential Protection, 50:5, mounting in main box 2 $4,399C – Surge Protection and AccessoriesOur standard surge protection consists of three lightning arrestors and one surge capacitor mounted in afabricated terminal box. Price of these varies with motor voltage. See charts below for List Adders:Code Option Description Category List AdderU92 Surge Capacitor and Lightning Arrestors (up to 4160 V)** 2 $16,919U92 Surge Capacitor and Lightning Arrestors (over 4160 V & up to 6900 V)** 3 $23,232U97 120/240 V Space Heater for Main Termain Box 2 $1,658**NOTE: Surge protection is not available for motors intended for use with an adjustable frequency driveapplication.D – Standoff InsulatorsStandoff insulators are standard feature of FS2 or FS3 terminal boxes. For FS1 terminal box, add per List Adderbelow.Code Option Description Category List AdderU89 Standoff Insulators 2 $3,417

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 29Date 11/12Modifications & AccessoriesTestsEach motor is given tests as may be deemed essential by Siemens. The following is a List Adder table anddescriptions of additional test options. An unwitnessed routine test is included at no charge with all motorsordered. When test reports are required, they must be specified at the time the motor is ordered. The test reportswill be per NEMA MG1-20. Where applicable, standard value of stray load losses to be used will be per SiemensProduct Engineering Standard or IEEE112 unless specified otherwise.Please refer to the Order Codes listed belowList AdderUnwitnessed Tests*250-500 HP 501-1500 HP 1501-2500 HP 2501-5000 HPRoutine Test No Charge No Charge No Charge No ChargeU04 Complete Test $13,084 $14,985 $18,547 $22,405U34 Complete Test per API 547 $18,072 $21,384 $25,426 $30,554F54 Polarization Index Test $1,530 $1,530 $1,530 $1,530U28 Bearing Temperature Test $4,365 $5,709 $6,856 $8,104U16 Sound Test (Walk-around) $3,575 $3,575 $3,575 $3,575Witnessed Tests*250-500 HP 501-1500 HP 1501-2500 HP 2500-5000 HPU01 Routine Test $4,762 $7,480 $9,339 $11,515U21 Routine Test per API 547 $13,100 $14,409 $15,720 $17,030U05 Complete Test $21,369 $24,510 $30,357 $36,664U35 Complete Test per API 547 $24,378 $29,637 $36,936 $44,440U29 Bearing Temperature Test $7,164 $9,256 $11,212 $13,245U17 Sound Test (Walk-around) $7,411 $7,411 $7,411 $7,411Sealed Winding Conformance Test(Spray Test per NEMA MG1)Frame Code = U46 Unwitnessed* Code = U47 Witnessed*500 – 580 $7,355 $12,033680 – SH400-SH450 $8,085 $13,243880 – SH560 – SH562 – SH564 $8,834 $14,435*NOTE: Add five (5) working days to lead-time for each Unwitnessed Test or ten (10) working days for eachWitnessed Test.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 30Date 11/12Modifications & AccessoriesRoutine TestEach motor is given a routine test in accordance with ANSI C50.41, NEMA MG1-12 and/or MG1-20 to assure thatit is free from electrical and mechanical defects. Included in the test are; Measurement of resistance of winding. Measurement of no load, current, power, and speed at rated voltage and frequency. Insulation resistance. High potential test per NEMA MG1-20. Mechanical balance and vibration per NEMA MG1-7.Complete TestComplete test per NEMA MG1-20 and test analysis includes; Routine test. Determination of efficiency at full, 3/4, and 1/2 loads. Determination of power factor at full, 3/4, and 1/2 loads. Temperature run by either dual frequency method or by direct load. Locked rotor current curve. This is done at reduced voltage to prevent thermal damage to motor. Determination of locked rotor and breakdown torques.Sound Pressure TestTest procedure in accordance with NEMA MG1 part 9.Bearing Temperature TestTo determine the stabilized bearing temperature at no load. If a minimum test duration time is required, specify onorder.Speed-Torque and Speed-Current Curves TestTo provide curves of torque versus speed and input current versus speed at specified input voltages.Polarization Index TestPolarization in accordance with IEEE 45.Efficiency Test – Segregated Loss Method (E1)This test is an efficiency test and analysis in full accord with IEEE 112, Method E1.Efficiency Test – Equivalent Circuit Method (F1)This test is an efficiency test and analysis in full accord with IEEE 112, Method F1.Sealed Winding Conformance TestTo test the sealed windings in accordance with NEMA MG1-20.18.2 – Test For Which Stator Cannot BeSubmerged.

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-1112Section 2Part 1Page 31Date 11/12Modifications & AccessoriesTorques - Non-StandardStarting or breakdown torques higher than standard usually require special rotor construction. If die cast rotors arestandard, copper bar rotors may be required. Even where copper bar rotors are standard, special rotor barmaterial or rotor construction may be necessary. Refer to your local Siemens Sales representative for pricing,frame, and availability.VoltagesThe MRPD designation for Voltages is indicated in the motor’s basic MRPD structure. Refer to Section 1,Part MRPD for more details.For sizing and pricing of most common voltages use the following chart;Voltage For Use60HZ50HZ*380 – 600 440, 480, 575, 600 380, 415 460601 – 2400 950, 1000, 2300, 2400 - 23002401 – 4160 4000, 4160 3000, 3300 40004161-4800 4800 - Refer To Your local SiemensSales Representative4801 – 6900 6600, 6900 5500, 6000, 6600,660069006901 – 13,800 Refer To Your local Siemens Sales Representative*See Frequency elsewhere in this section for proper motor sizing.Warranty OfferingsFor a copy of our Standard Warranty or for options of a Deferred Warranty or Extended Operational Warrantiesrefer detailed requirements to your local Siemens Sales representative for pricing and availability.

Siemens Industry, Inc.Drive Technologies Division – Large Drives Industrial Applications - ANEMA Motors4620 Forest AvenueNorwood, OH 45212-3396Phone: 513-841-3100 Fax: 513-841-3101ANSP-60000-1112 Rev.2©2013 Siemens Industry, Inc. All Rights Reserved.Siemens is a registered trademark of Siemens AG. Product names mentioned may betrademarks or registered trademarks of their respective companies. Specifications aresubject to change without notice.