Claire - Stainless Steel Cleaner - msds - Exp May 2015.pdf

Product Name: Stainless Steel CleanerPage: 1 of 5This revision issued: May, 2010SECTION 1 - IDENTIFICATION OF CHEMICAL PRODUCT AND COMPANYE. Sime & Company Australia Pty. Ltd. Phone (02)9525 5103Unit 1a/1-3 Endeavour Rd Fax (02)9525 5102Caringbah, NSW, 2229www.clairemfg.comAUSTRALIASubstance:Liquid hydrocarbon and other solvents presented in aerosol form.Trade Name:Stainless Steel CleanerProduct number: 841-002PProduct Use:Preparation used to clean steel.Creation Date: March, 2009This version issued: May, 2010Section 2 - Hazards IdentificationStatement of Hazardous NatureThis product is classified as: Hazardous according to the criteria of ASCC Australia.Dangerous according to the Australian Dangerous Goods (ADG) Code.Risk Phrases: R65, R66, R67. Harmful: May cause lung damage if swallowed. Repeated exposure may cause skindryness or cracking. Vapours may cause drowsiness and dizziness.Safety Phrases: S46, S24/25. If swallowed, contact a doctor or Poisons Information Centre immediately and showthis container or label. Avoid contact with skin and eyes.SUSDP Classification: None allocated.ADG Classification: Class 2.1UN Number: 1950Emergency OverviewPhysical Description & colour: Clear liquid.Odour: Lemon fragrance.Major Health Hazards: if aspirated, may cause lung damage.Potential Health EffectsInhalationShort term exposure: Available data indicates that this product is not harmful. In addition product is unlikely tocause any discomfort or irritation. Intentional misuse by deliberately concentrating and inhaling contents canbe harmful or fatal.Long Term exposure: No data for health effects associated with long term inhalation.Skin Contact:Short term exposure: Major health effect from this product is misuse of the aerosol function. If sprayedcontinuously on skin or in eyes, it can cause frostbite.Long Term exposure: Repeated exposure may cause skin dryness or cracking.Eye Contact:Short term exposure: Exposure via eyes is considered to be unlikely. If sprayed directly in the eye, this productwill irritate. If spraying is prolonged, it may cause damage through frostbite.Long Term exposure: No data for health effects associated with long term eye exposure.Ingestion:Short term exposure: Significant oral exposure is considered to be unlikely. Because of the low viscosity of thisproduct, it may directly enter the lungs if swallowed, or if subsequently vomited. Once in the lungs, it is very difficult toremove and can cause severe injury or death. This product is unlikely to cause any irritation problems in the short orlong term.Long Term exposure: No data for health effects associated with long term ingestion.MATERIAL SAFETY DATA SHEETIssued by: E. Sime & Company Australia Pty. Ltd. Phone: (02)9525 5103Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)

Carcinogen Status:ASCC: No significant ingredient is classified as carcinogenic by ASCC.NTP: No significant ingredient is classified as carcinogenic by NTP.IARC: No significant ingredient is classified as carcinogenic by IARC.Product Name: Stainless Steel CleanerPage: 2 of 5This revision issued: May, 2010Section 3 - Composition/Information on IngredientsIngredients CAS No Conc,% TWA (mg/m 3 ) STEL (mg/m 3 )Liquid hydrocarbon 64742-88-7 10-30 not set not setMineral spirit 64742-47-8 10-30 not set not setLiquid hydrocarbon 8042-47-5 10-30 not set not setacetone 67-64-1 13 1185 2375methyl acetate 79-20-9 9 606 757Propane 68476-85-7 10-20 1800 not setThis is a commercial product whose exact ratio of components may vary slightly. Minor quantities of other nonhazardous ingredients are also possible.The TWA exposure value is the average airborne concentration of a particular substance when calculated over a normal 8 hour working day for a 5day working week. The STEL (Short Term Exposure Limit) is an exposure value that should not be exceeded for more than 15 minutes and shouldnot be repeated for more than 4 times per day. There should be at least 60 minutes between successive exposures at the STEL. The term "peak "isused when the TWA limit, because of the rapid action of the substance, should never be exceeded, even briefly.Section 4 - First Aid MeasuresGeneral Information:You should call The Poisons Information Centre if you feel that you may have been poisoned, burned or irritated bythis product. The number is 13 1126 from anywhere in Australia (0800 764 766 in New Zealand) and is available at alltimes. Have this MSDS with you when you call.Inhalation: First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor.Skin Contact: Irritation is unlikely. However, if irritation does occur, flush with lukewarm, gently flowing water for 5minutes or until chemical is removed. If in doubt obtain medical advice.Eye Contact: Quickly and gently blot or brush product away. Flush the contaminated eye(s) with lukewarm, gentlyflowing water until the product is removed or until irritation has ceased, while holding the eyelid(s) open. Obtainmedical advice if irritation becomes painful or lasts more than a few minutes.Ingestion: If swallowed, do NOT induce vomiting. Wash mouth with water and contact a Poisons InformationCentre, or call a doctor.Section 5 - Fire Fighting MeasuresFire and Explosion Hazards: This product is classified as a flammable product. There is a moderate risk of anexplosion from this product if commercial quantities are involved in a fire. Firefighters should take care andappropriate precautions. Vapours from this product are heavier than air and may accumulate in sumps, pits and otherlow-lying spaces, forming potentially explosive mixtures. They may also flash back considerable distances.Fire decomposition products from this product may be toxic if inhaled. Take appropriate protective measures.Extinguishing Media: Water fog or fine spray is the preferred medium for large fires. Try to contain spills, minimisespillage entering drains or water courses.Fire Fighting: If a significant quantity of this product is involved in a fire, call the fire brigade. There is a danger of aviolent reaction or explosion if significant quantities of this product are involved in a fire. Recommended personalprotective equipment is full fire kit and breathing apparatus.Flash point:Not availableUpper Flammability Limit: Not availableLower Flammability Limit: Not availableAutoignition temperature: No data.Flammability Class: FlammableSection 6 - Accidental Release MeasuresAccidental release: This product is sold in small packages, and the accidental release from one of these is notusually a cause for concern. For minor spills, clean up, rinsing to sewer and put empty container in garbage. Althoughno special protective clothing is normally necessary because of occasional minor contact with this product, it is goodMATERIAL SAFETY DATA SHEETIssued by: E. Sime & Company Australia Pty. Ltd. Phone: (02)9525 5103Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)

Product Name: Stainless Steel CleanerPage: 3 of 5This revision issued: May, 2010practice to wear impermeable gloves when handling chemical products. In the event of a major spill, prevent spillagefrom entering drains or water courses and call emergency services.Section 7 - Handling and StorageHandling: Keep exposure to this product to a minimum, and minimise the quantities kept in work areas. CheckSection 8 of this MSDS for details of personal protective measures, and make sure that those measures are followed.The measures detailed below under "Storage" should be followed during handling in order to minimise risks topersons using the product in the workplace. Also, avoid contact or contamination of product with incompatiblematerials listed in Section 10.Storage: Store in a cool, well ventilated area, and make sure that surrounding electrical devices and switches aresuitable. Check containers and valves periodically for leaks. If you keep more than 25kg of flammable gases, youprobably require a license to do so. If you have any doubts, we suggest you contact your licensing authority in orderto clarify your obligations. Check packaging - there may be further storage instructions on the label.Section 8 - Exposure Controls and Personal ProtectionThe following Australian Standards will provide general advice regarding safety clothing and equipment:Respiratory equipment: AS/NZS 1715, Protective Gloves: AS 2161, Industrial Clothing: AS2919, Industrial EyeProtection: AS1336 and AS/NZS 1337, Occupational Protective Footwear: AS/NZS2210.ASCC Exposure Limits TWA (mg/m 3 ) STEL (mg/m 3 )acetone 1185 2375methyl acetate 606 757Propane 1800 not setVentilation: No special ventilation requirements are normally necessary for this product. However make sure thatthe work environment remains clean and that vapours and mists are minimised.Eye Protection: Eye protection such as protective glasses or goggles is recommended when this product is beingused.Skin Protection: You should avoid contact even with mild skin irritants. Therefore you should wear suitableimpervious gloves and facial protection when handling this product. See below for suitable material types.Protective Material Types: We suggest that protective clothing be made from the following materials: PVC, Viton.Respirator: Usually, no respirator is necessary when using this product. However, if you have any doubts consultthe Australian Standard mentioned above.Section 9 - Physical and Chemical Properties:Physical Description & colour: Clear liquid.Odour:Lemon fragrance.Boiling Point:No data.Freezing/Melting Point: No specific data. Liquid at normal temperatures.Volatiles:No data.Vapour Pressure: 414 kPa at 54°CVapour Density:No data.Specific Gravity:

Product Name: Stainless Steel CleanerPage: 4 of 5This revision issued: May, 2010Polymerisation: This product is unlikely to undergo polymerisation processes.Local Effects:Target Organs:Section 11 - Toxicological InformationThere is no data to hand indicating any particular target organs.Classification of Hazardous IngredientsIngredientRisk PhrasesNo ingredient mentioned in the HSIS database is present in this product at hazardous concentrations.Section 12 - Ecological InformationThis product is biodegradable. It will not accumulate in the soil or water or cause long term problems.Section 13 - Disposal ConsiderationsDisposal: Containers should be emptied as completely as practical before disposal. If possible, recycle containerseither in-house or send to recycle company. If this is not practical, send to a commercial waste disposal site. Do notpuncture or incinerate cans, even when empty. Please do NOT dispose into sewers or waterways.Section 14 - Transport InformationADG Code: 1950, AEROSOLSHazchem Code: 2YESpecial Provisions: 63, 190, 277Limited quantities: ADG 7 specifies a Limited Quantity value of 1000mL (see SP 277) for this class of product.Dangerous Goods Class: Class 2.1, Flammable gases.Packaging Group: Not setPackaging Method: P003Class 2.1 Flammable gases shall not be loaded in the same vehicle or packed in the same freight container withClasses 1 (Explosives), 3 (Flammable Liquids) (where both flammable liquids and flammable gases are in bulk), 4.1(Flammable Solids), 4.2 (Spontaneously Combustible Substances), 4.3 (Dangerous When Wet Substances), 5.1(Oxidising Agents), 5.2 (Organic Peroxides), and 7 (Radioactive Substances). They may however be loaded in thesame vehicle or packed in the same freight container with Classes 2.2 (Non-flammable Non-Toxic gases), 3(Flammable liquids except where both flammable liquids and flammable gases are in bulk), 6 (Toxic Substances), 8(Corrosive Substances) 9 (Miscellaneous dangerous goods), Foodstuffs and foodstuff empties.Section 15 - Regulatory InformationAICS: All of the significant ingredients in this formulation are to be found in the public AICS Database.The following ingredients: Liquid hydrocarbon, acetone are mentioned in the SUSDP. However, this product isexcluded from SUSDP provisions since it is a preparation packed in pressure spray packs.Acronyms:ADG CodeAICSCAS numberHazchem NumberIARCASCCNOSNTPR-PhraseSUSDPUN NumberSection 16 - Other InformationThis MSDS contains only safety-related information. For other data see product literature.Australian Code for the Transport of Dangerous Goods by Road and Rail, 7th EditionAustralian Inventory of Chemical SubstancesChemical Abstracts Service Registry NumberEmergency action code of numbers and letters that provide information to emergencyservices especially firefightersInternational Agency for Research on CancerOffice of the Australian Safety and Compensation CouncilNot otherwise specifiedNational Toxicology Program (USA)Risk PhraseStandard for the Uniform Scheduling of Drugs & PoisonsUnited Nations NumberMATERIAL SAFETY DATA SHEETIssued by: E. Sime & Company Australia Pty. Ltd. Phone: (02)9525 5103Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)

Product Name: Stainless Steel CleanerPage: 5 of 5This revision issued: May, 2010THIS MSDS SUMMARISES OUR BEST KNOWLEDGE OF THE HEALTH AND SAFETY HAZARD INFORMATION OF THE PRODUCT ANDHOW TO SAFELY HANDLE AND USE THE PRODUCT IN THE WORKPLACE. EACH USER MUST REVIEW THIS MSDS IN THE CONTEXT OFHOW THE PRODUCT WILL BE HANDLED AND USED IN THE WORKPLACE.IF CLARIFICATION OR FURTHER INFORMATION IS NEEDED TO ENSURE THAT AN APPROPRIATE RISK ASSESSMENT CAN BE MADE,THE USER SHOULD CONTACT THIS COMPANY SO WE CAN ATTEMPT TO OBTAIN ADDITIONAL INFORMATION FROM OUR SUPPLIERSOUR RESPONSIBILITY FOR PRODUCTS SOLD IS SUBJECT TO OUR STANDARD TERMS AND CONDITIONS, A COPY OF WHICH IS SENTTO OUR CUSTOMERS AND IS ALSO AVAILABLE ON REQUEST.Please read all labels carefully before using product.This MSDS is prepared in accord with the ASCC document “National Code of Practice for the Preparationof Material Safety Data Sheets” 2nd Edition [NOHSC:2001(2003)]Copyright © Kilford & Kilford Pty Ltd, May, 2010.http://www.kilford.com.au/ Phone (02)9251 4532MATERIAL SAFETY DATA SHEETIssued by: E. Sime & Company Australia Pty. Ltd. Phone: (02)9525 5103Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)