Product Technical Specifications Superior MDF - Flakeboard

Flakeboard Company LimitedFlakeboard – Sault Ste. Marie OperationsSUPERIOR MDF TECHNICAL DATAProduct Technical SpecificationsSuperior MDFSuperior MDF 3/8” to 1/2” 9/16” to 7/8” 1” to 11/8”Density (lb./ft.³ 47 45 44Internal Bond (psi) 120 115 110MOR (psi) 3700 3500 3400MOE (psi) 450,000 430,000 435,000Face Screw Holding (lbs.) 315 255 280Edge Screw Holding (lbs.) N/A 250* 250Moisture Content (%) 5-7 5-7 5-7Thickness Swell (%)*N/A for 9/6” thicknessAs per ANSISpecification8 8Superior Plus MDF 9/16” to 3/4” 1”Density (lb./ft.³ 47.5 46Internal Bond (psi) 165 155MOR (psi) 4300 4100MOE (psi) 475,000 485,000Face Screw Holding (lbs.) 340 325Edge Screw Holding (lbs.) 340 325Moisture Content (%) 5-7 5-7Thickness Swell (%) 8 8Revised on March 23, 2006 1

Superior SW 3/4”Density (lb./ft.³ 45.5Internal Bond (psi) 135MOR (psi) 4000MOE (psi) 475,000Face Screw Holding (lbs.) 300Edge Screw Holding (lbs.) 275Moisture Content (%) 5-7Thickness Swell (%) 8General InformationSanded Finish150 gritThickness Tolerance+/-.005 In.Maximum Grit Content .05%Physical Properties:These are typical values representing production at the Sault Ste. Marie facility. Flakeboard will meet orexceed the standards set out in ANSI A208.2 2002. The values listed are the result of tests conducted inaccordance with ASTM D 1037-99. “Standard Methods of Evaluating the Properties of Wood Based Fiber andParticle Panel Materials.” Specific design applications, technical data, product and thickness information isavailable upon request.Revised on March 23, 2006 2