JAMAICA THE FACTORIES ACT REGULATIONS (under ... - ILO

_____________________(c) Are the water gauges protected? ____________________(d) Is there a low water alarm device or fusible plug fitted? Which?___________________________12. Permissible working pressure for the ensuing 12 months (subject to anyconditions stated in paragraphs 13 and 14) calculated from dimensions and fromthe thickness and other data ascertained by the present examination, dueallowance being made for conditions of working if unusual or exceptionallysevere. _____________________________________________13. Repairs (if any) required, and period within which they should beexecuted. ______________________________________14. Other observations :_____________________________________________________________________________________________________________________________________________________________________________________________I CERTIFY THAT on ___________________________ , I thoroughlyexamined the boiler above described, that the above is a true report of theresult, and that I am not the owner of the boiler nor am I employed by theowner in any capacity other than as an independent contractor.Signature: __________________________Qualification: ________________________Address : ___________________________Date : ______________________________FORM B(Regulations 40, 43, 44)Report on Examination and Test of Steam Receiver and Air Receiver1. Name of Factory __________________________2. Address __________________________3. Name of Owner __________________________4. Name of Manager __________________________5. Description or distinguishing number or mark (if any) of air receiver orsteam receiver. __________________________6. Nature of Examination__________________________7. Hydraulic pressure applied__________________________8. Condition -State any defects materially affecting the permissible working