JAMAICA THE FACTORIES ACT REGULATIONS (under ... - ILO

pressureExternal _________________________Internal __________________________9. Mountings—.(a) Are there proper mountings including safety valves and pressuregauge? __________________________(b) Are all mountings properly maintained and in good working order?__________________________(c) Is the permissible working pressure marked on the receiver?__________________________10. Permissible working pressure for the ensuing 12 months__________________________I CERTIFY THAT on ______________________, I thoroughly examined the(steam receive, or air receive,) above described and that the above is a true report of theresult.Signature: __________________________Qualification: ________________________Address : ___________________________Date : ______________________________FORM C(Regulation 49)Report on Examination and Test of Lifting MachineI. Name of Factory __________________________2. Address __________________________3. Name of Owner __________________________4. Name of Manager __________________________5. Distinguishing number or mark (if any) and description sufficient to identifythe crane or other lifting machine. __________________________6. Date of examination made under regulation 49 and by whom it was carriedout__________________________7. Particulars of any defect found on examination and affecting the safe