PROFOS - Pipelife International

More documents

Recommendations

Info

Drawing 1 PROFOS laying in traffic zones7.3. PROFOS assembly requirements● An assembly plan (see sample assembly plan on Drawing1,2 and 3), prepared in accordance with specific design and terrain. . data and conditions.● A trench and levelled bedding according to the assembly plan.● To be checked the draw tank – manhole for cracks and defects on the body if any appear during transportation and storage.. . To be checked the leak-tightness of the inlet and outlet connections.● To lay and level PROFOS by a lifting device or by ropes. When dropping in the trench use the designated spots.● When covering and sealing the different levels, the instructions described in the assembly plan must be followed.● Before coving and sealing PROFOS must be connected to the corresponding sewerage. There must be manual sealing. . around the connections.● There must be manual sealing in the zone around the cover and additional reinforcing with bricks or concrete belt on which. . must laid the ring and the manhole’s coverIf on the spot are made additional openings in the draw tank, they must be made so that they guarantee leak-tightness.26Pipelifewww.pipelife.com
Diagram 2 Sample assembly plan of PROFOS in PRO with additional PRO armoured manholeDiagram 2 Sample assembly plan of PROFOS in PRO PRAGNUM with additional PRO armoured manholePipelifewww.pipelife.com27
Page 1 and 2: PROFOSMODULAR SEWAGEPUMP STATIONSww
Page 3 and 4: 1. Introduction1.1. What is PROFOS?
Page 5 and 6: 3. Product range3.1. PROFOS Identif
Page 7 and 8: DN/ODdischarging pipemmManhole type
Page 9 and 10: 7575--112222••• (RS)• (RS)7
Page 11 and 12: 9090----1122••• (RS)• (RS)9
Page 13 and 14: 110110------22••• (RS)• (RS
Page 15 and 16: WHAT IS What NECESSARY is necessary
Page 18 and 19: 5.3.6. Control panelThe modern cont
Page 21 and 22: Work pointThe work point is the poi
Page 23 and 24: 6.6.1. General requirements for des
Page 25: Note (see Table7):1) Tank’s type:
Page 29 and 30: 9. Additional elements and accessor
Page 31 and 32: Cast iron cover DN600 withD400 clas

PROFOS - Pipelife International

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?