Ferrite detector - This domain has been registered by BT

About the MF300F+MF300F+ is the latest instrument in the popular range ofmagnetic meters from Diverse. The robust slimline probebenefits from a novel magnetic design with excellentcoupling to the measurement sample. This results insensitivity to a small well defined volume and excellentresponse over the full range of ferrite samples.An air-cooled version of the probe allows Ferritemeasurement of hot samples.The latest software supports calibration over the wholerange of secondary ferrite sample held by the TWI. Transfersamples are supplied with a range of FN allowing userverification of the calibration.A new peak mode has been included. Storage of up to 52measurements is included on the standard instrument.Communication with a PC, via RS232 or USB, is providedas an option including downloading of the measurement log.Calibration/StandardsSpecificationUnitsRangeResolutionAccuracy (10°C-30°C)FN 0 - 10FN 10 - 30FN 30 - 100Accuracy (30°C-300°C)FN 0 - 10FN 10 - 30FN 30 - 100TransferstandardsZeroModeStoragePC DownloadProbeOperating temperatureHumidityWeight in caseFerrite Number FNFerrite percentage F%0 - 115 FN0 - 83% F%0.1 FN0.1F%± 0.5 FN± 5% of the reading± 10% of the reading± 1 FN± 10% of the reading± 20% of the readingFive standards,range typically 3 FN to 115 FNAutomatic on demandAverage or peak52 recordsRS232 or USBPencil style, 15mm diameterlength 120mmStandard 0°C-40°CAir cooled 0°C-300°CNon-condensing1.25 kgThe Diverse MF300F+ is calibrated using standards thatare traceable to internationally accepted secondarystandards. The International Institute of Welding in the UK(IIW) developed secondary standards that have beentested by The Welding Institute,(TWI) according tomethods described in DIN EN ISO 8249 and ANSI/AWSA4.2.The master calibration of the instrument is made againstthese standards. The transfer calibration standardssupplied with the MF300F+ are simulations of themagnetic effect of ferrite number and are each calibratedfor this effect against the IIW standards.Case dimensions210 x 100 x 45 mmMeasurement MethodThe MF300F+ measures using magnetic induction. Amagnetic field is induced from a rare earth magnet intothe sample via a complex magnetic path. Themagnetic field strength is measured and this value isthen used to compute the ferrite content.Ordering OptionsKingfisher House, High Green, Gt. Shelford, Cambridge, UK CB22 5EGTel: +44 (0)1223 84 44 44EMail: sales@diverse-technologies.netWeb: http://www.diverse-technologies.netStandard Ferrite meterFerrite meter with air-cooled probeSerial softwareFerrite meter with thickness optionMF300F+MF300F+ACRS232/USBMF300F+THDIVERSE own the copyright and patents in respect of its products. Due to continuing development, we reserve the right to change any specifications without notice.