Zone2 Query Specific CommandsCommand Parameters DescriptionZ2P?query Zone2 power: returns Z2PxZ2S?query Zone2 input: returns Z2SxZ2VFD?query main zone VFD information: returns Z1sssssssssssssxxxs = input source, x=master volume level,Z2V?query Zone2 volume: returns Z2Vsxx.xZ2? query Zone2 status: returns Z2SVsyyy.yMn where syyy.y is volume andn is mute state
Set HD Radio Common CommandsCommand Parameters DescriptionTAT xxxx Set tuner to AM band, frequency xxxx KHzwhere xxxx = 540 to 1600, in 10 KHz stepTATUTune up one step on AM bandTATDTune down one step on AM bandTAHDT xxxx Set tuner to HDAM band, frequency xxxx KHzwhere xxxx = 540 to 1600, in 10 KHz stepTAHDTUTune up one step on HDAM bandTAHDTDTune down one step on HDAM bandTFT xxx.x Set tuner to FM band, frequency xxx.x MHzwhere xxxx = 88.0 to 107.9, in 20 KHz stepTFTUTune up one step on current FM bandTFTDTune down one step on current FM bandTFHDT xxx.x Set tuner to HDFM band, frequency xxx.x MHzwhere xxxx = 88.0 to 107.9, in 20 KHz stepTFHDTUTune up one step on current HDFM bandTFHDTDTune down one step on current HDFM bandTAP y Set tuner to AM band, using preset y (01,02,03…99)TAHDP y Set tuner to HDAM band, using preset y (01,02,03…99)TFP y Set tuner to FM band, using preset y (01,02,03…99)TFHDP y Set tuner to HDFM band, using preset y (01,02,03…99)T + Tuner seek up from current stationT - Tuner seek down from current stationTAS y=zzzz Set preset y of tuner AM band to zzzz KHzwhere xxxx = 540 to 1600, in 10 KHz stepTAHDS y=zzzz Set preset y of tuner HDAM band to zzzz KHzwhere xxxx = 540 to 1600, in 10 KHz stepTAF y=zzzz Set preset y of tuner FM band to zzzz MHzwhere xxxx = 88.0 to 107.9, in 20 KHz stepTAHDF y=zzzz Set preset y of tuner HDFM band to zzzz MHzwhere xxxx = 88.0 to 107.9, in 20 KHz step