WinCAPS - Print/Preview - Dural Irrigation

Position Qty. Description Single Price1 Hydro Solo-E CRE 5-8Price onProduct No.: 96479543requestGrundfos Hydro Solo-E booster set with one pump is a combined unit consisting of oneE-pump (CRE) fittedwith isolating valve, non-return valve, discharge pipe, pressure transmitter, pressuregauge and diaphragmtank.Upon delivery the booster set is ready for operation.The pump has the following characteristics:- Impellers and intermediate chambers are made ofStainless steel DIN W.-Nr. 14.301 DIN W.-Nr..- Pump head and base are made of Cast iron.- The shaft seal has assembly lengthaccording to EN 12756.- Power transmission is via cast iron splitcoupling.The pump is fitted with an IEC-flanged three-phaseMGE motor with frequency converter andPI-controller integrated in the motor terminalbox. No additional motor protection is required asboth motor and electronics are protected byintegrated overload and temperature protection.External sensor can be connected if controlledpump operation based on for example flow,differential pressure or temperature is required.A control panel enables setting of requiredsetpoint as well as setting of pump to MIN or MAXoperation or to STOP. The control panel hasindicator lights for "Operation" and "Fault".Communication with the pump is possible by meansof Grundfos R100 Remote Control enabling furthersettings as well as reading out of a number ofparameters such as "Actual value", "Speed","Power input" and total "Power consumption".The terminal box holds terminals for theconnection of:- Pump start/stop (potential-free contact),- external remote setpoint setting via analogsignal, 0 - 5 V, 0 - 10 V, 0(4) - 20 mA,- 5 V voltage supply for setpoint potentiometer,Imax = 5 mA,- sensor, 0 - 5 V, 0 - 10 V, 0(4) - 20 mA,- 24 V voltage supply for sensor, Imax = 40 mA,- input for forced control to MIN or MAX(potential-free contact),- potential-free fault signal relay withchangeover contact, reporting Fault, Operation or Ready,- RS485 GENIbus.Liquid:Liquid temperature range: 0 .. 70 °CTechnical:Speed for pump data:Type of shaft seal:Curve tolerance:Materials:Material, pump housing:Material, impeller:2853 rpmHQQEISO 9906 Annex ACast ironEN-JL1030 DIN W.-Nr.A48-30 B ASTMStainless steelPrinted from Grundfos CAPS1/3

Position Qty. Description Single Price14.301 DIN W.-Nr.304 AISIInstallation:Maximum ambient temperature: 40 °CMaximum operating pressure: 10 barSize, pump inlet: Rp 1 1/4Size, pump outlet: Rp 1 1/4Flange size for motor:FT100Electrical data:Motor type:MGE90SAP2 : 1.1 kWMains frequency:50 HzRated voltage:3 x 380-480 VRated current:2,60-2,30 ACos phi - power factor: 0,88-0,77Enclosure class (IEC 34-5): IP55Insulation class (IEC 85): FTank:Volume of pressure tank:18 lOthers:Net weight:47 kgGross weight:50 kgShipping volume: 0.6 m³Printed from Grundfos CAPS2/3

DescriptionValueProduct name: Hydro Solo-E CRE 5-8Product No: 96479543EAN number: 5700395449013Technical:Speed for pump data:2853 rpmImpellers: 8Type of shaft seal:HQQECurve tolerance:ISO 9906 Annex APump No: 96551471Stages: 8Materials:Material, pump housing:Material, impeller:Installation:Maximum ambient temperature: 40 °CMaximum operating pressure: 10 barSize, pump inlet: Rp 1 1/4Size, pump outlet: Rp 1 1/4Flange size for motor:FT100Liquid:Liquid temperature range: 0 .. 70 °CCast ironEN-JL1030 DIN W.-Nr.A48-30 B ASTMStainless steel14.301 DIN W.-Nr.304 AISIElectrical data:Motor type:MGE90SAP2: 1.1 kWMains frequency:50 HzRated voltage:3 x 380-480 VRated current:2,60-2,30 ACos phi - power factor: 0,88-0,77Enclosure class (IEC 34-5):IP55Insulation class (IEC 85):FMotor No: 85755805H(m)504030201000 1 2 3 4 5 6 7P(kW)1.20.80.40100 %90 %80 %70 %60 %50 %40 %25 %Hydro Solo-E CRE 5-8Q(m³/h)Controls:Control type:Tank:Volume of pressure tank:ME18 lOthers:Net weight:47 kgGross weight:50 kgShipping volume: 0.6 m³Product range:InternationalConfig. file no: 96115803Printed from Grundfos CAPS3/3