Certificate of Factory Production Control Production of ... - Conergy AG

B&BT172Certificate of Factory Production ControlThis certificate has been issued toConergy AG.ofAnckelmannsplatz 120537, Hamburg,Germany.whose production management system has been assessed and foundto comply with the Factory Production Control Requirements of the MCS ProductCertification Scheme in respect of:Production of Photovoltaic Solar Panelsat the above addressand includes the following products:Conergy PX xxxP (240-250 Watts);Conergy PX xxxP (280-305 Watts).Ranges of Photovoltaic Solar Panels as detailedon the attached annex to this certificateSigned:L-4on behalf of TUV SÜD BABTAPPROVED PRODUCTBA)13TCertificate Number:BABT 8663 ROValid from: 18th January 2013 This Certificate expires on: 17th January 2016The holder of this certificate is authorised to use the MCS Approved Product Mark. This certificate has been issued in accordance with theCertification Regulations of TUV SUD BABT. Conditions of validity of this certificate, if any, are listed in the Annex.This certificate constitutes page 1 of the combined Certificate and Annex.For further details related to this certification please contact customer.services@babt.comTÜVSUDBABT TUVS[JDGroupOctagon House . Concorde Way . Fareham • Hampshire • P015 5RL • United Kingdom

Annex to Certificate Number BABT 8663 ROB&BTManufacturing Location:Shangrao Economic Development Zone,334100, Jiangxi Province,People’s Republic of China.Standards used to establish conformityMCSOO5 Issue 2.3 and MCSO1O Issue 1.5 on the basis of Assessment Reportdated 31 st August 2010 and subsequent information and test data supplied andaccepted by TUV SÜD BABT.Product Categories within the Scope of this CertificationProduct CategoryPhotovoltaic PanelsConditionsSee belowProducts within the Scope of this CertificationProduct CategoryConditions8663-01: Conergy PX xxxP; This certificate covers a family of(where xxx=240-250 in 5 Watt steps); Photovoltaic Solar Panels which usePolycrystalline cells.8663-02: Conergy PX xxxP;(where xxx=280-305 in 5 Watt steps).The Panels are manufactured using thesame processes and materials.Conditions:This certificate authorizes the manufacturer or their authorized representative toapply the MCS Approved Product Mark to the range of products listed above inaccordance with the MCS sub-licence agreement dated 15 th January 2013.This certificate loses its validity if the manufacturer makes any changes ormodifications to the product or the approved quality system, which have notbeen notified to, and agreed with TUV SUD BABT.The manufacturer must immediately cease affixing the MCS Approved ProductMark on any product subject to expiry, withdrawal or revocation of thiscertificate./1,.c /4Signed Valid From: 18 th January 2013on behalf of TUV SÜD BABTThis annex is valid only in conjunction with the certificate number stated and forms part of that certificate.It is valid from the date entered above until the date of expiry or cancellation of the registration certificate,unless superseded by a later issue of this annex. Annex page 2 of 2