Sani-Matic In-Line Strainers

In-Line StrainersFlow DiagramSoil is collected on outsideof wedgewire or perforatedinsert for easy clean off.Angle-Line StrainerComplete Assembly4" O.D. Body Sanitary Finish 316L Stainless SteelEND INLETPerforated Insert (1/8" or 1/4" holes)Tri-ClampFitting Size Length 20.75" Length 36" GPM1.5" S10026 S10036 802" S10027 S10037 1202.5" S10028 S10038 1803" S10029 S10039 2404" S10030 S10040 300Wedgewire Insert (Specify spacing – .020–.060)Tri-ClampFitting Size Length 20.75" Length 36" GPM1.5" S10146 S10156 802" S10147 S10157 1202.5" S10148 S10158 1803" S10149 S10159 2404" S10150 S10160 3006" O.D. Body Sanitary Finish 316L Stainless SteelTri-ClampFitting Size Length 40" GPMPerforated Insert(1/8" or 1/4" holes) 4" S10176 >250Wedgewire Insert(4" dia.) 4" S10175 >2504" dia. body with3" x 15" element1 sq. ft. area3-5/32"20-3/4"26-1/16"4" dia. body with3" x 30" element2 sq. ft. area3-5/32"36"41-5/16"SIDE INLET -REVERSE FLOWSide Inlet – Reverse FlowUse same part number, beginning with ”X”(X10026). Conversion kits available to changeflow direction using same strainer body.6" dia. body with4" x 30" element2.6 sq. ft. area4-3/16"40"46-3/8"Straight-Line StrainerComplete Assembly4" O.D. Body Sanitary Finish 316L Stainless SteelPerforated Insert (1/8" or 1/4" holes)Tri-ClampFitting Size Length 20.75" Length 36" GPM1.5" S10006 S10016 802" S10007 S10017 1202.5" S10008 S10018 1803" S10009 S10019 2404" S10010 S10020 300Wedgewire Insert (Specify spacing – .020–.060)Tri-ClampFitting Size Length 20.75" Length 36" GPM1.5" S10126 S10136 802" S10127 S10137 1202.5" S10128 S10138 1803" S10129 S10139 2404" S10130 S10140 3004" dia. body with3" x 15" element1 sq. ft. area20-3/4"4" dia. body with3" x 30" element2 sq. ft. area36"

In-line StrainersInternal Component Parts:Replacement strainer bodies available upon request4" O.D. Body FRAME – 316LPART#740327 Angle-line — End-Inlet 3" x 15"L740312 Angle-line — End-Inlet 3" x 30"L740320 Angle-line — Side-Inlet 3" x 15"L740348 Angle-line — Side-Inlet 3" x 30"LAngle-Line & Straight-LineEnd Plug (END Inlet)PART#720419 Nylon End Plug (std.)720988 Teflon End Plug4" O.D. Body Angle-LineO-RINGPART# Material020236 Viton020503 EPDM (std)024020 TeflonSPECIFY T.C. FITTING SIZE FOR:SPEC Straight-line — 3" x 15"LSPEC Straight-line — 3" x 30"LStraight-LineEnd InletAngle-LineSide Inlet(reverse flow)Angle-LineEnd Inlet(std. flow)Angle-Line & Straight-LineRETAINER CLIP – 316LPART#740295 End-Inlet720408 Side-InletAngle-Line O-RINGRETAINER (SIDE-INLET)PART# 720582Side-InletEnd-Inlet3 oz. Silicone LubricantPART# 025135SPARE PARTS KIT – Includes 1 each: Nylon End Plug, Retainer Clip,4" T.C. Gasket and (4) Frame Seal O-rings, End-Inlet Model S25725Dual Angle-Line Strainer SystemCall for quotes as full assembly. Automated backflush system withpressure sensing alarm available.STRAINER STAND ONLY – 304SS(For mounting dual-strainer assemblies #S10080)6" O.D. Body COMPONENTS740622 Angle-line End-Inlet Frame740629 Angle-line Side-Inlet Frame (1/8" or 1/4")741001 Angle-line Side-Inlet wedgewire720616 Nylon End Plug Only740623 Retainer Clip – 316L End-Inlet320033 Retainer Clip – 316L Side-Inlet020222 O-Ring720631 O-Ring Retainer (Side-Inlet Model)SPEC Wire Mesh (Specify Mesh size)VALVE KIT WITH KOLTEK SHUTTERVALVES – 316L (3-WAY ACTION)Kit includes: (4) Elbows, (2) Valves (316L only),(8) Clamps, (8) GasketsSize: 1-1/2", 2", 2-1/2", 3"VALVE KIT WITH BUTTERFLY VALVES –304 or 316L (as shown)Kit includes: (2) Elbows, (2) Tee, (4) Valves,(10) Clamps, (10) GasketsSize: 1-1/2", 2", 2-1/2", 3", 4"1915 S. Stoughton Road • P.O. Box 8662 • Madison, WI 53708Phone: 608-222-2399 • Fax: 608-222-5348 • info@sanimatic.comwww.sanimatic.comILS-5210-11/06