GS Clamps

CLAMPSInstallation and AssemblyGS-FLANGESYSTEMTightening Torques and Maximum Loads in Pipe DirectionTUBES & PIPESAll tightening torques and max. loads in pipe directionrefer to clamps with cover plates and hexagon headbolts acc. to DIN 931/933.211CLAMPSSliding starts when the shown values (F) are reached.TECHNICALINFORMATIONVALVESClamp GroupHexagonHead Bolt DIN931/933TighteningTorque(Nm)Standard-Series (acc. to DIN 3015, part 1)Polypropylene Polyamide AluminumMax. load inpipe directionF (kN)TighteningTorque(Nm)Max. load inpipe directionF (kN)TighteningTorque(Nm)Max. load inpipe directionF (kN)08 0.6 10 0.6 12 3.51 8 1.1 10 0.7 12 4.22 8 1.3 10 0.8 12 4.33M68 1.4 10 1.6 12 4.94 8 1.5 10 1.7 12 5.05 8 1.9 10 2.0 12 7.36 8 2.0 10 2.5 12 8.9Clamp GroupHexagonHead Bolt DIN931/933TighteningTorque(Nm)Heavy-Series (acc. to DIN 3015, part 2)Polypropylene Polyamide AluminumMax. load inpipe directionF (kN)TighteningTorque(Nm)Max. load inpipe directionF (kN)TighteningTorque(Nm)Max. load inpipe directionF (kN)3S12 1.6 20 4.2 30 12.14S M1012 2.9 20 4.5 30 15.15S 15 3.3 25 5.1 35 15.56S M12 30 8.2 40 9.3 55 29.47S M16 45 11.0 55 25.8 120 34.98S M20 80 14.0 150 21.0 220 70.69S M24 110 28.0 200 32.0 250 50.010S180 40.0 350 48.0 500 84.511S M30200 119.0 370 125.0 500 181.512S 270 168.0 450 180.0 600 244.5Clamp GroupHexagonHead Bolt DIN931/933Tightening Torque(Nm)Twin-Series (acc. to DIN 3015, part 3)PolypropyleneMax. load in pipe directionF (kN)Tightening Torque(Nm)PolyamideMax. load in pipe directionF (kN)1D M6 5 0.9 5 0.92D12 2.1 12 2.23D 12 1.9 12 2.0M84D 12 2.7 12 2.95D 8 1.7 8 2.5BITE TYPEFITTINGSSAE J514 JICFLARE FITTINGSHOSES &HOSE COUPLINGSADAPTORSSPECIALSOLUTIONSMACHINES