Commercial Framing Systems - Ullrich Aluminium

ALUMINIUMHUNTINGDALE FRAMING SYSTEMSection No:Page No:Date:Replaces:41301.05.052003 EDITION33.2SPACER (FULL LENGTH)(by others)WEDGE10 DAYLIGHTGLASSDRY GLAZING---------- ---------------------25 mm 343-6 WEDGE Inside and outsideGLAZING NOTES:DRY GLAZING: One side must have a removable bead. Position setting blocks (2) approx 1 /4width in from the edge. Use silicone to eliminate them from moving. Place glass panel into thepocket resting on the setting blocks. Position the glass and install temporary wedges on bothsides of glass.Cut wedges approx. 5% oversize and place in warm soapy water.Insert wedge starting from ends. Remove temporary ones as you go.Fit wedges to both sides before proceeding to either the sill or head.Seal all corners with black silicone.Glazing from one side is possible using captive wedges. These are inserted into one side of thepocket, the glass is then inserted and wedge fitted to the other side.