NeoSphere™ - Kim Lighting

ElectricalModuleEase of InstallationThe NeoSphere attaches to its standard 4"diameter non-tapered pole by a single concealedcenter bolt that activates an internalexpansion device within the pole. No externalfasteners exist at the pole top. The ballast andall related electrical components are mountedon a single plate, with quick disconnect plugson the wiring. To facilitate easy installation ofthis ballast module, the reflector module isquickly and easily removed. After the reflectormodule and lamp are installed, the housingcloses and seals by a single screw concealedbetween two support arms.Ease of MaintenanceFor routine relamping, the NeoSphere housinghinges open by a single screw and is held in theopen position by a locking stop arm freeing bothhands for servicing. Should the ballast moduleneed servicing, the reflector module quickly removesfor easy access. For projects where fixturedowntime must be minimal, extra ballast modulesmay be ordered. Should a ballast fail, one of thestored modules can be immediately installed whilethe failed ballast can be replaced and stored as afuture replacement. The NeoSphere opticalchamber is so well sealed that generally the onlymaintenance is a light cleaning during relamp.Another consideration for easy maintenance is theuse of hinged poles available for the NeoSpherein heights of up to 14 feet. See pages 18 and 19.• Die CastAluminumhousing• Injection moldedhemispheredlenses• Flat temperedglass lens• Totally sealedoptics• Eight stagefinish• QuickInstallation &maintenanceKIM LIGHTING11