NeoSphere™ - Kim Lighting

More documents

Recommendations

Info

SPECIFICATIONSLamp Notice: All NeoSphere optical systems are designedfor Coated Lamps. The use of clear lampswill cause shadows from the support arms.Fixture SpecificationsHousing: One piece die cast aluminum with integral hinge and supportarm extensions that continue upward from the lens frame. Housinghinges upward for lamp and ballast access, and is held in the openposition by a stainless steel self-locking stop arm freeing both hands forservicing. Hinge pin is stainless steel and the housing gasket is onepiece silicone.Lens Frame: One piece die cast aluminum with integral hinge and foursets of twin support arms at 90° intervals. Support arms form a sphericalshape and blend with the housing support arm extensions. A singlestainless steel socket head screw is held captive between two supportarms for securing the housing. Three lens types are offered: NS1-clearF" thick injection molded UV stabilized acrylic hemisphere; NS2-clearflat F" thick tempered glass; NS3 and NS4-translucent white F" thickinjection molded UV stabilized acrylic hemisphere, (Optional polycarbonateavailable, see pages 17,26 & 27). Lenses are held in the lensframe by stainless steel clips and sealed by a one piece silicone gasket.Hemispherical lenses are also sealed at the support hub by a onepiece silicone gasket. The integral support hub contains a field-splicecompartment, a silicone gasketed cover and one of the following poleattachment means:FM-Flush post top mount by means of an expansion device activatedby a single bolt within the splice compartment. Pole must have asquare-cut plain top. Standard pole size is 4" O.D. (3C" O.D. poleadapter available upon request).PT-Pole tenon mounting by means of a cast aluminum adapter containingfour recessed C" stainless steel allen head set point screws.Pole must have a 2" pipe tenon (2C" O.D. X 4K" min. length). Poletenon must be field drilled at one set screw location to insure againstfixture rotation.Horizontal Lamp Reflector Modules H2, H3, H4, H5: Specular Alzak ®optical segments rigidly mounted in an aluminum frame which snapsinto and out of the housing as a one piece module. All “H” reflectormodules are interchangeable. Sockets are porcelain medium baserated 4KV, wired to a disconnect plug for the electrical module. Opticalchamber is totally sealed by silicone gaskets at the Housing/LensFrame interfaces.Vertical Lamp Reflector Modules V3, V5: Specular Alzak ® opticalsegments mounted within a one piece spun aluminum shell. NS4Induction Lamp model is spun aluminum bright dip Alzak ® . Reflectormodules attach to housing with keyhole slots and are interchangeable.Sockets are porcelain medium base rated 4KV and supported aroundtheir perimeter by a silicone sleeve press-fit between the socket and aheat-sink extrusion. Sockets are wired to a disconnect plug for the electricalmodule, optical chamber is totally sealed by silicone gaskets atthe Housing/Lens frame interface.Electrical Module: All electrical components are U.L. and C.S.A. recognized,mounted on a single aluminum plate with keyhole slots forquick attachment or removal from the housing. All components areprewired to disconnect plugs, and all ballast are high power factorrated for -40°F.(HPS) and -20°F. (MH) starting. For the NS4 InductionLamp model, a complete HF generator and Induction Lamp system isfurnished mounted to the aluminum plate. Induction Lamp System ishigh power factor rated for -4°F, starting. (See Page 13 for other data).Finish: Super TGIC thermoset polyester powder coat paint. Standardcolors are Black, Dark Bronze, Light Gray, or White. Powder Coating is2.5 mil nominal thickness over a chromate pretreatment; 2500 hour saltspray test endurance rating. Custom colors are available and subjectto additional charges, minimum quantities and longer lead times.Consult representative.Certification: Fixture is U.L. and U.L.C. listed for wet location 1572.Typical NS2fixture shownHemisphericallens shown16E"FM-Flush MountPT-Tenon Mount15K"4" diameter pole4L"Pole with 2"pipe size tenon(2C" O.D. X 4K"minimum length).Fixture EPA Max WeightSingle Mount: 1.0 30 lbsTwin Mount: 3.0 70 lbsWarning: Fixtures must be grounded inaccordance with local codes or the NationalElectrical Codes. Failure to so may result inserious personal injury.16KIM LIGHTING
7E"7E"17K"Twin Arm Mount17K"Wall MountNeosphere with optionalWall Embedment BracketPolycarbonate LensHouseside Shields5F"4J"Photocell10J"Option SpecificationsWall Mounting: A cast aluminum mounting bracket isfurnished for attachment to wall, (Attachment meansand strength of wall by others). An optional WEB (WallEmbedment Bracket) is available for casting intopoured-in-place concrete walls. Bracket is galvanizedsteel with receptacles for two C" bolts provided.Extruded aluminum oval arm is factory assembled toan extruded aluminum fixture support riser and a castaluminum wall cover plate. Fixture riser has a cast aluminumbottom cap, and wall cover plate has a removablecast aluminum cover for field splice access.Complete arm assembly can be mounted before fieldsplices are made. All arm, cap and cover plate componentsare curvilinear forms to match the fixturedesign, and all components are mechanicallyattached with no visible welds or fasteners. All wallcomponents are finished to match the fixture. For FM(Flush Mount) fixtures only.Twin Arm Mount: Two extruded aluminum oval armsare supplied with internal concealed draw bolts forattachment to <strong>Kim</strong> 4" O.D. poles with predrilled mountingholes (see page 18 & 19). Arms are 180° apart, suppliedwith an internal pole reinforcing plate with wire strainrelief and an extruded aluminum riser for mounting FM(Flush Mount) fixtures only. A cast aluminum pole capand matching riser cap are included, and all componentsare mechanically fastened to eliminate weldsand visible fasteners.Optional Fusing: High temperature fuse holders factoryinstalled inside the fixture housing. Single fusing (SF) for120V, 277V, 347V or double fusing (DF) for 208V, 240V.Optional Photocell: Photocell is factory prewiredinside fixture housing with sensor located externallybetween two support ribs. For twin arm mount, eachfixture has a photocell.Optional Polycarbonate Lens: One piece UV stabilizedF" thick injection molded polycarbonate hemisphericallens replaces standard acrylic lens in NS1,NS3 or NS4. Full silicone gasketing top and bottom.CAUTION: Use only when vandalism is anticipated tobe high. Useful life is limited by UV discoloration fromsunlight and metal halide lamps.Optional Houseside Shield: For horizontal lampreflectors H2, H3, and H4 only, a louvered shield isprovided in stamped clear anodized aluminum topass streetside light while restricting houseside light.For vertical lamp reflector V3 only, a dished clearanodized aluminum shield is provided. Shields arefactory installed to the reflector.HorizontalLamp ModelsVerticalLamp ModelsKIM LIGHTING 17
Page 2: 1. PREFIXES AND SUFFIXES•You can
Page 8 and 9: KIM LIGHTING
Page 10 and 11: OPTICAL DESIGN/VERSATILITYHorizonta
Page 12 and 13: FEATURESLamp Notice: All NeoSphere
Page 14 and 15: NS4100,000 HOUR➊INDUCTION LAMP27
Page 17: Excellentfor parksand publicspaces.
Page 21 and 22: Ordering Examples:Catalog Number Po
Page 23 and 24: PROPORTIONAL AID18'16'14'12'10'8'6'
Page 25 and 26: KIM LIGHTING
Page 27 and 28: Ordering GuideNS1 & NS2NS2SingleFix
Page 29 and 30: Ordering GuideNS3 & NS4NS4SingleFix
Page 31 and 32: APPLICATION ENGINEERING SERVICESApp

NeoSphere™ - Kim Lighting

Create successful ePaper yourself

Delete template?

Save as template?