1 ConocoPhillips S Zorb Gasoline Sulfur Removal Technology ...

More documents

Recommendations

Info

Solids Transfer SectionThe solids transfer system, which moves sorbent to and from the reactor andregenerator systems, has been simplified. The use of one lockhopper system, asopposed to two-lockhopper operation, has resulted in lower capital requirementsand operating costs (lower nitrogen and hydrogen requirements) withoutcompromising operability, reliability, or safety. HAZOP reviews have beenconducted to assure the safe operation of the “One-Lockhopper System”. Theresults of the HAZOPs did not show any safety issues associated with thedesign.ReliabilityThe S Zorb process has the ability to shutdown and isolate the sorbentregeneration system long enough to perform typical maintenance tasks. Thisallows the reactor system to stay online at full charge making low sulfur product.One objective of the Process Optimization Study was to ensure that theoptimized design matched or exceeded current reliabilities. The ProcessOptimization team examined each section of the S Zorb process and maderecommendations to further improve unit reliability. In parallel with the ProcessOptimization Study, KBC Advanced Technologies Inc. was requested to performan independent reliability assessment for the optimized design. In particular,KBC was asked to compare S Zorb SRT reliability with hydrodesulfurizationreliability. KBC used their own methodology, equipment reliability database, andset all the reliability assumptions. They concluded that there was no significantdifference in reliability between S Zorb SRT and hydrodesulfurization.Conclusions and Future OutlookThe Ferndale unit’s safe and successful start-up and reliable performancedemonstrate the advantages of S Zorb SRT for desulfurization of gasolinestreams. The demonstrated commercial success at Ferndale is complementedby further reductions in capital and operating costs and improvements in thetechnology’s performance and reliability. A 38,500 bpd S Zorb unit featuringthese technical improvements is in the advanced stages of design/constructionfor the ConocoPhillips refinery at Lake Charles, Louisiana. The combined feedsulfur level is approximately 1,000 ppm and the unit is being designed to producea 10 ppm product. Startup of the S Zorb unit at Lake Charles is scheduled for late2005. In addition, a 4 th ConocoPhillips S Zorb unit is in the advanced stages ofproject definition and approval. The anticipated design throughput is around30,000 BPD and is targeted to start-up in late 2006.The future promises to bring continued downward pressure on the sulfur contentof gasoline even beyond the near term targets that have been established inmany countries around the world. S Zorb technology is strongly positioned toproduce fuels that comply with much more stringent sulfur regulations with little,12
or potentially no, octane loss, minimal hydrogen consumption, strong operatingreliability, and flexibility.ConocoPhillips is committed to an active technology development programfocused on additional enhancements to S Zorb SRT. These enhancementspromise to deliver additional improvement to the technology, including furtherimprovements to the impressive octane retention capability. Theseenhancements are expected to be available near term and are considered “dropin”improvements. So, the benefits are immediate requiring little or no capital toimplement.References1) S. Hatanaka, M. Yamada, and O. Sadakane, “Hydrodesulfurization ofCatalytic Cracked Gasoline. 1. Inhibiting Effects of Olefins on HDS ofAlkyl(benzo)thiophenes Contained in Catalytic Cracked Gasoline”, Ind.Eng. Chem. Res., 1997, 36, 1519-1523.2) Tim McGuff, “Ultra Low Sulfur Gasoline via Catalytic Distillation”, CDTech, GDS Seminar, July 18, 2001, Houston.13
Page 3: Figure 2. Comparison of relative re

1 ConocoPhillips S Zorb Gasoline Sulfur Removal Technology ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?