Indoor Mini-Breakout (Distribution) Optical Fibre Cables - Meditronik
Indoor Mini-Breakout (Distribution) Optical Fibre Cables - Meditronik
Indoor Mini-Breakout (Distribution) Optical Fibre Cables - Meditronik
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Product Datasheet<strong>Mini</strong>-BO(<strong>Distribution</strong>)Page 2 of 2Rev. 10 - 08/09/01<strong>Indoor</strong><strong>Mini</strong>-<strong>Breakout</strong> (<strong>Distribution</strong>)<strong>Optical</strong> <strong>Fibre</strong> <strong>Cables</strong>halogen-free, metal-free<strong>Optical</strong> CharacteristicsCharacteristics (cabled) Multi-Mode - Graded-Index optical fibres according to IEC 60793Size Wavelength Attenuation Bandwidth Gigabit EthernetRefractive<strong>Fibre</strong>-typeaverage/max.PerformanceIndex(µm) (nm) (dB/km) (MHz•km) (m)50 ± 2.5 850 2.6 / 2.8 ≥ 6005501.48150/125125 ± 2 1300 0.6 / 0.9 ≥ 12005501.47662.5 ± 2.5 850 3.0 / 3.2 ≥ 2002201.49562.5/125125 ± 2 1300 0.7 / 0.9 ≥ 6005501.490<strong>Fibre</strong>s with improved Gigabit Ethernet performance on request available.Characteristics (cabled) Single-Mode - Matched-Cladded optical fibres according to ITU-G.652<strong>Fibre</strong>-typeSize Wavelength Attenuation Dispersion PMDRefractiveaverage/max.Index(µm) (nm) (dB/km) (ps/(nm•km)) (ps/√km)9/125patchcord quality9.3 ± 0.5125 ± 1131015500.35 / 0.50.21 / 0.3< 3.5< 18 < 0.51.4671.467A test report (attenuation) is supplied with each delivery.Mechanical, physical and/or environmentalTemperature range according to IEC 60794-1-2-F1 StrippabilityTransport/storage - 30 to + 70 ºC Secondary coating only ≤ 10 cmInstallation - 5 to + 50 ºC Secondary + primary coating ≤ 10 mmOperation - 5 to + 55 ºCPulling tension according to IEC 60794-1-2-E1 Crush resistance according to IEC 60794-1-2-E3See table with dimensions Tight buffer ≤ 4000 N/mCable≤ 4000 N/mBending radii for fibres and tight buffersBending radii cableInstallation/operation > 25 mm Static according to IEC 60794-1-2-E11 – 15 x ØDynamic according to IEC 60794-1-2-E6 – 20 x ØHalogen-free according to HD 602 (IEC 60754-2) Flame retardancy according to IEC 60332-2Corrosivity pH ≥ 3.5 - µS/cm ≤ 100Guide to installation and handling• When laying and installing optical fibre cables it is vitally important not to exceed the specifiedvalues set for pulling tension, bending radii and temperature. The installation methods have to bein accordance with the common standards.• To ease insertion certified lubricants (e.g. paraffin) may be used.The use of soap or similar substances as lubricants is strictly prohibited.• If a cable needs to be fastened, constrictions ≥ 0.3 mm must be prevented.• It is advisable to cap the cable-ends during storage.Options• <strong>Indoor</strong> <strong>Mini</strong>-<strong>Breakout</strong> cables with excellent strippable dry semi-tight buffered fibres.• Intex <strong>Mini</strong>-<strong>Breakout</strong> cables for internal and external use.• Non-standard cable constructions, colours, details and/or additional information regarding specificationsare available on request.Belden Wire & Cable B.V. Netherlands Tel. +31-(0)77-3878-555 or Fax. +31-(0)77-3878-488 or E-mail: sales.info@belden.nlAll rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.All printing errors are subject to correction. Technical specifications are subject to change without notice.
Change language