13.07.2015 Views

TECHNICAL RESCUE SOLUTIONS - Rescue Response Gear

TECHNICAL RESCUE SOLUTIONS - Rescue Response Gear

TECHNICAL RESCUE SOLUTIONS - Rescue Response Gear

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

new additions for 2010Technical <strong>Rescue</strong> SolutionsRIGNEWMINIIMPROVEDGEMINIIMPROVEDPARTNERNEWFIXEIMPROVED<strong>RESCUE</strong>IMPROVEDMINDERIMPROVEDTWINIMPROVEDRIG D21Compact self-braking descenderThe RIG is a descent-control device intended for expert ropeaccess and rescue technicians. It allows the user to positionthemselves anywhere along the rope and then easily stopwhere needed by placing the handle in the locked position.This descender is compact and intuitive to use, making forsmooth descents. The moving side plate with the safetygate allows the device to be installed or removed from therope without disconnecting it from the carabiner. With itsinnovative design and compact size, the RIG is a simple andeffective alternative to more traditional descenders.Rope diameter: 10.5 - 11.5mmAvailable in two colors:- RIG: D21A (gold)- RIG: D21AN (black)Weight: 380gCE EN 341 Class A, EN 12841 type C, NFPA 1983 (2006ed.) L ratedMINI P59ALightweight Prusik minding pulleyAluminum side plates and 1” tread diameter aluminumsheave for rope diameters of 7 - 11mm. Sealed ballbearings for high efficiency (91%).Safe working load: 5kN (2.5kN on one rope end)MBS: 23kNWeight: 80gCE EN 12278, NFPA 1983 (2006 ed.) L ratedGEMINI P66ACompact double Prusik minding pulley with becketAluminum side plates and 1” tread diameter aluminumsheaves for rope diameters of 7 - 11mm. Sheaves aremounted in parallel with auxillary attachment points tobuild different types of pulley systems. Sealed ball bearingsfor high efficiency (91%).Safe working load: 6kN (1.5kN on one rope end)MBS: 23kNWeight: 135gCE EN 12278, NFPA 1983 (2006 ed.) L ratedPARTNER P52AHighly efficient ultra-compact pulleyCompact pulley with aluminum side plates and 1” treaddiameter aluminum sheave for rope diameters of 7 -11mm. Sealed ball bearings for high efficiency (91%).Safe working load: 5kN (2.5kN on one rope end)MBS: 15kNWeight: 56gCE EN 12278FIXE P05WFixed side pulley for hauling systems or deviationsFixed sides allow for quick installation and connection to arope clamp. Compact and lightweight with a 21mm sheavemounted on a self-lubricating bushing, which allows forgood efficiency (71%). For rope diameters of 7 - 13mm.Safe working load: 5kNMBS: 22kNWeight: 90gCE EN 12278<strong>RESCUE</strong> P50ASwing sided pulley for heavy loads or intensive useAluminum side plates and 38mm aluminum sheave forrope diameters of 7 - 13mm. Sealed ball bearings forhigh efficiency (95%). Connect up to three carabiners forease of use.Safe working load: 8kN (4kN on one rope end)MBS: 36kNWeight: 185gCE EN 12278, NFPA 1983 (2006 ed.) G ratedMINDER P60APrusik minding pulley2” tread diameter aluminum sheave for rope diameters of7 - 13mm. Sealed ball bearings for high efficiency (97%).Connect up to three carabiners for ease of use.Safe working load: 8kN (4kN on one rope end)MBS: 36kNWeight: 295gCE EN 12278, NFPA 1983 (2006 ed.) G ratedTWIN P65ADouble Prusik minding pulley with becket2” tread diameter aluminum sheaves for rope diametersof 7 - 13mm. Sheaves are mounted in parallel withauxillary attachment points to build different types of pulleysystems. Sealed ball bearings for high efficiency (97%).Connect up to three carabiners for ease of use.Safe working load: 12kN (3kN on one rope end)MBS: 36kNWeight: 450gCE EN 12278, NFPA 1983 (2006 ed.) G rated

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!