TECHNICAL RESCUE SOLUTIONS - Rescue Response Gear

OXAN SCREW-LOCKNEWVULCAN SCREW-LOCKNEWASAPASAP’SORBER 40OXAN TRIACT-LOCKNEWVULCAN TRIACT-LOCKNEWASAP’SORBER 20OXAN M72Steel symmetric locking carabinerOXAN carabiners are designed for work-at-heightprofessionals. Their strength and compact size make themparticularly suited for use in difficult conditions whereweight is not an issue: setting fixed anchors, connecting tometal structures, etc.These carabiners are available in the TRIACT-LOCK versionfor frequent manipulation and the SCREW-LOCK versionfor occasional use. They each have the Keylock systemto facilitate maneuvers. The SCREW-LOCK version isequipped with a visual locking indicator.OXAN SCREW-LOCK (M72 SL):Major axis MBS: 27kNMinor axis MBS: 7kNOpen gate MBS: 7kNWeight: 215gCE EN 362, NFPA 1983 (2006 ed.) L ratedOXAN TRIACT-LOCK (M72 TLA):Major axis MBS: 27kNMinor axis MBS: 16kNOpen gate MBS: 7kNWeight: 250gCE EN 362, NFPA 1983 (2006 ed.) L rated, ANSI Z359.1,CSA Z259.12VULCAN M73High-strength steel locking carabinerThe high-strength VULCAN carabiners are designed forrescue professionals. With a large-capacity openingand high strength, these carabiners are ideal for settingmultiple anchors where conditions are difficult and weightis not an issue. These carabiners are available in theTRIACT-LOCK version for frequent manipulation and theSCREW-LOCK version for occasional use. They each havethe Keylock system to facilitate maneuvers. The SCREW-LOCK version is equipped with a visual locking indicator.VULCAN SCREW-LOCK (M73 SL):Major axis MBS: 40kNMinor axis MBS: 11kNOpen gate MBS: 11kNWeight: 290gCE EN 362, NFPA 1983 (2006 ed.) G ratedVULCAN TRIACT-LOCK (M73 TLA):Major axis MBS: 40kNMinor axis MBS: 16kNOpen gate MBS: 11kNWeight: 330gCE EN 362, NFPA 1983 (2006 ed.) G rated, ANSI Z359.1,CSA Z259.12ASAP B71Mobile fall arrester for safety rope (ideal fortraining)The ASAP moves along the rope without manualintervention (upwards and downwards) and locks to stopa fall, slide, or uncontrolled descent even if the device isgrabbed during the fall. It works on vertical or angledenvironments and is easy to install and remove at any pointon the rope. Comes with the OK TRIACT-LOCK automaticlocking carabinerFor 10.5 - 13mm semi-static ropesWeight: 427gCE certified: EN 353 2, EN 12841 type AASAP’SORBER L71Energy absorber with integrated lanyard for theASAPDesigned to connect the ASAP mobile fall arrester to aharness. The energy generated from a fall is absorbed bythe tearing of engineered stitching. The terminations areequipped with STRINGs to hold the connector in positionand protect the webbing from abrasion.Two sizes are available to achieve desired distance from thesafety rope:L71 20 - 20cmWeight: 60gCE EN 355L71 40 - 40cmWeight: 100gCE EN 355