Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Care of Arbors and Adapters<strong>Brake</strong> <strong>Lathes</strong>CAUTIONAlthough the adapters, arbors, and the spindle aremade of top grade steel and are turned, hardened,and precision ground to close tolerances, great careshould be taken in their use, handling, and storage.Even the smallest nick, scratch, or loose chip cancause incorrect rotor alignment, resulting in inaccuratemachining.Remove all adapters from the arbor after machining a rotor andwipe them clean - especially the inboard adapter. When a finishedrotor is removed from the arbor, the inboard adapter maymove slightly away from the face of the arbor and allow metalchips to fall into the opening causing a poor mounting for thenext rotor.Regularly inspect the faces and seating tapers of the adaptersfor nicks and scratches, correct any flaw with a fine stone. If thedamage cannot be corrected, replace the adapter. Handle theadapters and arbors with care and store them on individualhooks. DO NOT throw them into a box. The adapters aredesigned for mounting rotors only, DO NOT misuse theadapters.<strong>AMMCO</strong> <strong>7000</strong> <strong>Brake</strong> <strong>Lathes</strong> • 13
Change language