Hand Held Welding Torches (291KB) - IPS Flow Systems

welding torchesDuratherm Hand-Held Welding Tool✓✓✓✓✓✓✓For use with external air supply (eg. DT6 or DT14)Compact and lightweightContinuous adjustment of welding temperaturewithout changing air volume (Acc. DVS 2208)Built-in electronic temperature controlsAutomatic low air protectionAir and electrical supply in one hoseFully rotating handle including nozzleThe Wegener Duratherm hot air welding tool is compactand easy to use, weighing 450 grams. It is for use with anexternal air supply.It can be ordered with either 4m or 8m long hose.DurathermItem Code PriceDuratherm with 4m hose 10816 311.08Duratherm with 8m hose 10817 319.59Heating element HEd 1000W 11858 47.39Portable blower DT 4 (one connection) 15857 800.80Portable blower DT 6 (two connections) 10825 969.72Portable blower DT 6L (two connection + air volume guage) 10826 1128.90Workshop blower DT 14 (six connections) 10827 1577.30Wegener air volume gauge 11087 167.70Wegener digital temperature gauge including thermocouple 11088 247.89Autotherm Hand-Held Welding Tool✓✓✓✓✓✓For use with external air supply (eg. DT6 or DT14)Compact and lightweightIncludes heating element HEx 800WHandle with built-in power controlLuminous diode display showing temperaturereached (green) or temperature not reached (red)By setting temperature to 0ºC the tourch iselectronically switched offThe Wegener Autotherm hot air welding tool is compactans easy to use, and includes diode temperature display. Itis suitable for use with an external air supply.It can be ordered with either 4m or 8m long hose.AutothermItem Code PriceAutotherm with 4m hose 10821 543.18Autotherm with 8m hose 10822 551.69Heating element HEd 800W 10311 47.39Portable blower DT 4 (one connection) 15857 800.80Portable blower DT 6 (two connections) 10825 969.72Portable blower DT 6L (two connection + air volume guage) 10826 1128.90Workshop blower DT 14 (six connections) 10827 1577.30Wegener air volume gauge 11087 167.70Wegener digital temperature gauge including thermocouple 11088 247.89See following page for details of welding nozzles540

welding torchesAirtherm Hand-Held Welding Tool✓✓✓✓✓Intergral high volume air supplyCompact and slim designContinuously adjustable air temperature up to 600ºCIntegrated output controlsAutomatic low air protectionThe Wegener Airtherm hot air welding tool is compact andeasy to use. Available in two versions, the Airtherm 1600has a heating capacity of 1600W and a weight ofapproximately 1.4kg. The airtherm 3000 has a heatingcapacity of 3000W and a weight of approximately 1.5kg.Airtherm 1600Airtherm 3000Item Code PriceAirtherm 1600 18283 240.6120mm Wide slot nozzle for Airtherm 1600 18397 30.3940mm Wide slot nozzle for Airtherm 1600 18398 30.395mm Round nozzle for Airtherm 1600 18400 30.39Triple nozzle for Airtherm 1600 18401 30.39Nozzle adaptor for Airtherm 1600 18399 34.64Airtherm 3000 18284 290.4375 x 2mm Wide slot nozzle for Airtherm 3000 18403 46.1870 x 10mm Wide slot nozzle for airtherm 3000 18402 34.02Duratherm SC Hand-Held Welding Tool✓✓✓✓✓✓Intergral high volume air supplyCompact and lightweightContinuous adjustment of welding temperaturewithout changing air volume (Acc. DVS 2208)Built-in electronic temperature controlsAutomatic low air protectionHose connection to blower for ease of useThe Wegener Duratherm SC hot air welding tool has aseperate blower to reduce the weight of the hand-heldwelding tourch to approximately 450 grams, The compact,light weight of the tool combined with the 1.5 metre longhose allows greater freedom of movement for the operator.Duratherm SCItem Code PriceDuratherm SC 10818 569.91Heating element HEd 1000W 11858 47.39Complete Welding Kit✓✓✓✓✓Hot air welding tourch Duratherm or AutothermSpare heating element HEd ot HExOne tacking nozzle HD, one round nozzle RD 4mm,one high speed welding nozzles SSD 4mm and oneround brush for cleaning nozzlesOn-site blower DT6L including air volume gaugeCarrying caseItem Code PriceDuratherm Kit with 4m hose 10819 1517.75Duratherm Kit with 8m hose 10820 1526.26Autotherm Kit with 4m hose 10823 1748.64Autotherm Kit with 8m hose 10824 1757.13541

extrusion welders & air blowersHand Held Extrusion WeldersWegener’s EXWELD series of extrusion welders offers amultitude of models to suit every application. Wegenercustomers can choose from a wide variety of extrusionwelders and select the most suitable design in capacityand air supply for their application. Regardless of factorssuch as sheet thickness, pipe diameters, weld geometries,environment conditions, in shop or field locations orpolymer types- Wegener has the right machine to fulfillyour needs.Wegener’s extensive range of extrusion welding machinesis complemented by a large number of accessories. Theseinclude tailored shoes for special applications, rotating andangled welding heads just to name a few. Oil and moisturefree clean air, imperative for the quality of a weld is offeredthrough dedicated blowers which are lowest in operatingcost and lowest in noise generation. These blowers aredesigned to provide the correct air volume for optimumextrusion welding.Please contact us for further details.EXWELD alpha2 SCEXWELD sigma SCModel Welding Capacity WeightEXWELD alpha2 SC up to 2.6kg/h 7kgEXWELD sigma SC up to 1.9kg/h 5.8kgBlower DT4✓✓✓✓✓✓For use with one welding torch0.2 Bar / up to 60 l/min0.15 kW A.C.motor220vLow operating noiseWeight approximately 9.5 kgItem Code PriceBlower model DT4 15857 800.80Blower DT6 & DT6L✓✓✓✓✓✓✓✓For use with two welding torch0.8 Bar / up to 120 l/min0.25 kW A.C.motor220vLow operating noiseIdeal for long air supply hosesWeight approximately 15 kgDT6L includes air flow meterItem Code PriceBlower model DT6 10825 969.72Blower model DT6L 10826 1128.90542

nozzlesTacking NozzleSpeed Welding Nozzle with Tacking NoseItem Code PriceTacking nozzle 10187 38.89Speed Welding Nozzle (Round)Item Code PriceSSD/HD 3 for 3mm round wire 10173 102.07SSD/HD 4 for 4mm round wire 10174 102.07SSD/HD 5 for 5mm round wire 10181 102.07Speed Welding Cast NozzleItem Code PriceSSD 3 for 3mm round wire 10175 78.99SSD 4 for 4mm round wire 10176 78.99SSD 5 for 5mm round wire 10177 78.99Speed Welding Nozzle (Profile)Item Code PriceSSD 3C for 3mm round wire 13020 78.99SSD 4C for 4mm round wire 17346 78.99Speed Welding Cast Nozzle withTacking NoseItem Code PriceSSD/Prof 3x3x4 for profile wire 90-4 11001 116.66SSD/Prof 3x3x5 for profile wire 80/90-5 11002 116.66SSD/Prof 4x4x6 for profile wire 80/90-6 11003 116.66SSD/Prof 5x5x6 for profile wire 11004 116.66SSD/Prof 5x5x7 for profile wire 80/90-7 11005 116.66SSD/Prof 6x6x8 for profile wire 90-8 11006 116.66SSD/Prof 7x7x7 for profile wire 60-7 11007 116.66Item Code PriceSSD/HD 3C for 3mm round wire 11716 102.07SSD/HD 4C for 4mm round wire 11715 102.07AccessoriesItem Code PriceDigital temperature gauge 11088 247.89Air flow meter 11087 167.70543

hand-held fusion toolsHand-held Fusion Tools✓ Suitable for PE, PP and PVDF✓ Portable and easy to useWidos hand-held heating tools are round or rectangular indesign. They include electronic or thermostatictemperature control (a digital display is optional for theelectronic version). The electronic control also featurestemperature adjustment and control in accordance withDVS 2208.Heating surfaces are PTFE coated. All tools have an on/offswitch, a mains control lamp and a control lamp forheating intervals. A steel carry case or heat-protected boxmay be ordered for safe transport of the tools.Special voltages and dimensions are also available onrequest.Round Hand-held Heating ToolsSize Control Power Code Price≤ 90mm Dia. Thermostatic 110v / 315w H0090T110 388.01≤ 90mm Dia. Electronic 110v / 315w H0090E110 450.59≤ 120mm Dia. Thermostatic 110v / 500w H0120T110 369.24≤ 120mm Dia. Electronic 110v / 500w H0120E110 510.67≤ 200mm Dia. Thermostatic 110v / 800w H0200T110 494.39≤ 200mm Dia. Electronic 110v / 800w H0200E110 619.56≤ 295mm Dia. Thermostatic 110v / 1500w H0320T110 600.78≤ 295mm Dia. Electronic 110v / 1500w H0320E110 719.69Square Hand-held Heating ToolsSize Control Power Code Price150mm x 150mm Thermostatic 110v / 750w H0150VT110 355.47150mm x 150mm Electronic 110v / 750w H0150VE110 434.31250mm x 250mm Thermostatic 110v / 2000w H0250VT110 578.26250mm x 250mm Electronic 110v / 2000w H0250VE110 670.88Free TrainingWe can provide free installertraining either on site or at ourbespoke training facility.Contact Tony Charlton orTom Tate on:0800 975 79 71544

hand-held socket fusion toolsWeld IT ® Socket Fusion ToolHand held welding tool✓✓Suitable for PE, PB, PP and PVDFMultiple connections possible on each toolSocket fusion tool with electronic temperature control foruse with socket fusion blocks up to 63mm. A digitaltemperature display with convenient buttons to set thetemperature. The tool comes complete with vice supportstand for use on site or in the workshop.Everything is packed in a steel carrying case includingspigot and socket heating blocks in sizes20/25/32/40/50/63mm.110V50/60 Hz1.7 kgMaximum temperature: 260ºCMaximum temperature tolerance +/- 5ºCSocket Fusion Tool CompleteSize Control Power Connections Code Price20-63mm Electronic 110v 2 WELDIT 110V 414.75Spare PartsItem Size (O.D. mm) Code PriceTable clamp HM001 36.31Heating block, non-stick coated 16 HD016S 26.29Heating block, non-stick coated 20 HD020S 27.53Heating block, non-stick coated 25 HD025S 30.04Heating block, non-stick coated 32 HD032S 47.55Heating block, non-stick coated 40 HD040S 53.82Heating block, non-stick coated 50 HD050S 57.57Heating block, non-stick coated 63 HD063S 68.84Peeling and chamfering tool 20 799.300.260 130.58Peeling and chamfering tool 25 799.300.270 130.58Peeling and chamfering tool 32 799.300.280 130.58Peeling and chamfering tool 40 799.300.290 179.90Peeling and chamfering tool 50 799.300.300 193.22Peeling and chamfering tool 63 799.300.310 219.88Weld It Socket Fusion Tool Carrying CaseWeld It Socket Fusion Tool with Bench StandDigital DisplayBench Stand545