View Datasheet - Mouldlife

DYNAMICMIXER SPEEDRenPaste ® 4666 is designed to be used with a dynamic type mixer (rotary mixerelement). In addition, the rheology (dynamic viscosity) of the product may be alteredby regulation of the mixer speed.Regulation of the mixer speed allows operators to select from a fluid paste to a thick,highly thixotropic product according to the application requirements.In order to have a fully mixed paste free from application problems, it is recommendedto regulate the mixer within certain limits. The exact speed required will depend onthe mixer length, diameter and the flow rate of the paste through the mixer.Paste too thin (fluid) : Increase mixer speedPaste too thick (viscous) : Decrease mixer speedRenPaste® 4666 : Relation flow rate/mixer speedMixer size 13mm length 150mmMixer speed (Rpm)4500400035003000250020001500100050000 1 2 3Flow rate (kg/Min)Correct rangeMixer speed too lowRenPaste® 4666 : Relation flow rate/mixer speedMixer size 20mm length 150mmMixer speed (Rpm)400035003000250020001500100050000 1 2 3Flow rate (kg/Min)Correct rangeMixer speed too lowRenPaste 4666_eur_e Page 2 of 4 24/6/2010

IMPORTANT LEGAL NOTICEHuntsman Advanced Materials warrants only that its products meet the specifications agreed with the user.Typical properties, where stated, are to be considered as representative of current production and should notbe treated as specifications.The manufacture of materials is the subject of granted patents and patent applications; freedom to operatepatented processes is not implied by this publication.While all the information and recommendations in this publication are, to the best of Huntsman AdvancedMaterial s knowledge, information and belief, accurate at the date of publication, NOTHING HEREIN IS TO BECONSTRUED AS A WARRANTY, WHETHER EXPRESS OR IMPLIED, INCLUDING BUT WITHOUTLIMITATION, AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN ALL CASES,IT IS THE RESPONSIBILITY OF THE USER TO DETERMINE THE APPLICABILITY OF SUCHINFORMATION AND RECOMMENDATIONS AND THE SUITABILITY OF ANY PRODUCT FOR ITS OWNPARTICULAR PURPOSE.The behaviour of the products referred to in this publication in manufacturing processes and their suitability inany given end-use environment are dependent upon various conditions such as chemical compatibility,temperature, and other variables, which are not known to Huntsman Advanced Materials. It is theresponsibility of the user to evaluate the manufacturing circumstances and the final product under actual enduserequirements and to adequately advise and warn purchasers and users thereof.Products may be toxic and require special precautions in handling. The user should obtain Safety DataSheets from Huntsman Advanced Materials containing detailed information on toxicity, together with propershipping, handling and storage procedures, and should comply with all applicable safety and environmentalstandards.Hazards, toxicity and behaviour of the products may differ when used with other materials and are dependenton manufacturing circumstances or other processes. Such hazards, toxicity and behaviour should bedetermined by the user and made known to handlers, processors and end users.Except where explicitly agreed otherwise, the sale of products referred to in this publication is subject to thegeneral terms and conditions of sale of Huntsman Advanced Materials LLC or of its affiliated companiesincluding without limitation, Huntsman Advanced Materials (Europe) BVBA, Huntsman Advanced MaterialsAmericas Inc., and Huntsman Advanced Materials (Hong Kong) Ltd.Huntsman Advanced Materials is an international business unit of Huntsman Corporation. HuntsmanAdvanced Materials trades through Huntsman affiliated companies in different countries including but notlimited to Huntsman Advanced Materials LLC in the USA and Huntsman Advanced Materials (Europe) BVBAin Europe.Ren ® and RenPaste ® are registered trademarks of Huntsman Corporation or an affiliate thereof.Copyright © 2010 Huntsman Corporation or an affiliate thereof. All rights reserved.Main Office :Huntsman Advanced Materials (Switzerland) GmbHKlybeckstrasse 200CH-4057 BASELSwitzerland+41 61 299 1111RenPaste 4666_eur_e Page 4 of 4 24/6/2010