JSB Cat R4 - Modus Lighting

23Heat db Seal®: Vertical Compact Florescent Standard: Vertical Compact FlorescentMicro Synergy® Heat db Seal®Micro Synergy® Standard24■ Up to 90 minutes rating when installed in a fire rated ceiling■ Faceted aluminium reflector■ Formed steel body with intumescent seals■ Self sealing■ Integral HF ballast■ Spring wing fixing■ Acoustic qualities■ Emergency versions available on request■ Integral HF ballast■ Faceted aluminium reflector■ Formed steel body■ Spring wing fixing■ Emergency versions available on requestNano Synergy® StandardNano Synergy® Heat db Seal®Electrical SpecificationSuffix guide to finishesRange Wattage Lamp Type Part CodeMicro Heat db Seal 1 x 10W TC-TE 3500.**Nano Heat db Seal 1 x 10W TC-TE 3510.**Micro Standard 1 x 10W TC-TE 3502.**Nano Standard 1 x 10W TC-TE 3512.**Input voltage 230/240Vac 50/60HzInput current 10W = 0.11APower factor >0.6Energy classification (EEI) A2Lamp frequency 40KHz nominalElectrical protection Class II double insulatedLamp type TC-TE 4 pin lampLamp base G24-q1Lamp Life 15,000hrsLumen 70lm per circuit wattBallast protection Auto-shutdown with defectivelampElectrical connection Pre-wired 1m 2-core oval0.75mm ❑ PVC flexible cableComplianceCE Mark Conforms to Low Voltage &EMC DirectivesSafety BS EN 61347 BS EN 60598Immunity BS EN 61547Emmision BS EN 55015BS EN 61000-3-2“Designed to allow compliance with L016A LightingEnergy Regulation and Building Code of Australia”Mechanical SpecificationLuminaire Zinc plated formed steel bodyReflector Faceted spun anodised aluminiumBezel (Micro) Epoxy polyester powder coatedsteel 20% glossBezel (Nano) Epoxy polyester powder coateddie-cast aluminium 20% glossGear housing Self extinguishing polycarbonateLuminaire fixing Spring wing fixingCeiling thickness 5 - 20mmIngress protection IP20 StandardIP44 with bezel attachment IP65 with bezel attachment Applies to Micro Heatdb Seal® and Micro Standard only.See page 20 for accessorieswww.ibl.co.ukwww.ibl.co.uk