Dynacalibrator® Model 150 Calibration Gas Generator ... - Interchim

SpecificationsFeaturesPermeation chamberPermeation deviceMaximum total lengthMaximum diameterTemperature controlRangeAccuracyAccessoriesCarrier flowDimensionsWeightPassivated glass-coated stainless steel chamberStainless steel capDedicated switched-mode temperature controller withfront panel and serial port controlDigital readout for set point and chamber temperaturePower switch with LED indicator lightStainless steel inlet and outlet fittings for 1/16" tubing(1/4" and 1/8" also available)Universal power input 110 VAC/230 VACCooling fanStainless steel, passivated with Inertium ® andUltradeactivation ® coatingScrew cap access9.5" long by 0.875" ID (24 cm x 2.2 cm)24 cm (9.5")1.6 cm (0.62")30°C to 110°C±0.01°C at a set point from 5°C above ambient to 110°CPower cord for 110 VAC power source(220 VAC Model 150-C)Forceps for removing and inserting permeation devicesTool for removing and securing permeation chamber capRecommended range of 100 - 1200 ml/min6" wide x 15" deep x 7" high(15.4 cm x 38.1 cm x 17.7 cm)10.5 lbs. (4.8 kg)North America, South America, and Australia/Oceania contact:Metronics Inc.tel: 360 697-9199fax: 360 697-6682metronics@vici.comEurope, Asia, and Africa contact:VICI AG Internationaltel: Int + 41 41 925-6200fax: Int + 41 41 925-6201info@vici.chUS customerscall toll-free(877) 737-1887Inertium ® and Ultradeactivation ® are registered trademarks of AMCX (Advanced Materials Components Express).VICI ® is a registered trademark of Valco Instruments Co. Inc. and VICI AG. Dynacalibrator ® and Dynacal ® are registered trademarks of VICI Metronics, Inc. Rev. 11/05