AS3239 - Sherwin-Williams Automotive Finishes Product Catalog

AWX Performance PlusWaterborne Spray Gunand Surface Cleaner4600800PRODUCT DESCRIPTION:AWX Performance Plus Waterborne Spray Gun and Surface Cleaner is a waterborne cleaning solution that can beused, as packaged – no mixing or dilution required. As a waterborne spray gun cleaner it is designed to remove AWXPerformance Plus waterborne basecoat from waterborne spray equipment. As a waterborne surface cleaner, the AWXPerformance Plus Waterborne Spray Gun and Surface Cleaner can also be used on OEM topcoats, primers andrefinish undercoats to prepare the surface prior to painting. When used on plastic substrates, AWX Performance PlusWaterborne Spray Gun and Surface Cleaner minimizes static build-up.WATERBORNE SPRAY EQUIPMENT CLEANING:SUITABLE SPRAY EQUIPMENT CLEANINGWaterborne Spray Equipment with AWX Performance Plus BasecoatMIXING:Use as packaged. No mixing or dilution required. Compliant in all VOC restricted areas.SPRAY EQUIPMENT CLEANING PROCEDUREEmpty the waterborne spray gun of any remaining AWX Performance Pluswaterborne basecoat, rinse, and dispose into an approved waste collection drumdedicated to waterborne waste only. Do not mix waterborne waste withsolventborne waste.AWX Performance PlusWaterborne Spray Gun and Surface Cleaner can beused in a dedicated waterborne gun washer or it can also be applied with aSherwin-Williams Premium Hand Sprayer (A50100SW)Thoroughly clean the waterborne spray gun and cup.Blow off the interior and exterior of the waterborne spray gun with cleancompressed air and towel dry.PERSONAL PROTECTIONFor use by trained professionals only.Read label, directions, and MSDS before use.Use appropriate Personal Protective Equipment while cleaning waterborne spray equipment.Page 1 of 3 AS3239 6/10/2013

AWX Performance PlusWaterborne Compliant Spray Gunand Surface Cleaner4600800SURFACE CLEANING:Prior to repair, wash surfaces to be painted including adjacent panels with a mild detergent and water solution to removeheavy deposits of dirt, oil, and grease. Wipe dry with a clean, lint free cloth.SUITABLE SUBSTRATESP27/P30 PrimerSurfacerOEM FinishesBare MetalAged RefinishesPlasticMIXING:Use as packaged. No mixing or dilution required. Compliant in all VOC restricted areas.SURFACE CLEANING PROCEDURESaturate a clean cloth with AWX Performance Plus Waterborne Spray Gun andSurface Cleaner.AWX Performance Plus Waterborne Spray Gun and Surface Cleaner can alsobe applied with a Sherwin-Williams Premium Hand Sprayer (A50100SW)Working in small areas, apply to area to be painted including adjacent panels.Wipe off with a second clean, dry cloth before AWX Performance PlusWaterborne Spray Gun and Surface Cleaner is allowed to dry.If drying occurs re-wet with AWX Performance Plus Waterborne Spray Gun andSurface Cleaner and wipe off with a clean, dry cloth.RECOATMake sure AWX Performance Plus Waterborne Spray Gun and Surface Cleaner hasbeen completely removed and panel is dry before painting.PERSONAL PROTECTIONFor use by trained professionals only.Read label, directions, and MSDS before use.Use appropriate Personal Protective Equipment while surface cleaning.Page 2 of 3 AS3239 6/10/2013

AWX Performance PlusWaterborne Compliant Spray Gunand Surface Cleaner4600800NOTESAWX Performance Plus Waterborne Spray Gun and Surface Cleaner is notrecommended for use on solvent sensitive substrates such as lacquer, or softeningwill occur.Protect AWX Performance Plus Waterborne Spray Gun and Surface Cleaner fromfreezing. If freezing occurs allow AWX Performance Plus Waterborne Spray Gun andSurface Cleaner to slowly warm to room temperature. And, invert the closed container fromtop-to-bottom several times (hand agitation) before use.REGULATORY DATAAs PackagedLb/GalG/LDensity 8.24 987% by Wt. % by Vol.Volatiles 100.0 100.0Water 95.5 94.7Exempt Compounds 2.5 3.1Lb/GalG/LVOC Total 0.16 19VOC Less Exempt 7.48 897Lb/GalKG/LHAPs 0.00 0.000LABEL CAUTION INFORMATION4600800Contents are COMBUSTIBLE. Keep away from heat and open flame. Use only with adequate ventilation. To avoidoverexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If youexperience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) orleave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do nottransfer contents to other containers for storage. FIRST AID: If INHALED: If affected, remove from exposure. Restorebreathing, Keep warm and quiet. If on SKIN: Wash affected area thoroughly with soap and water. Remove contaminatedclothing. Launder before re-use. If in EYES: Flush eyes with large amounts of water for 15 minutes. Get medical attention.If SWALLOWED: Call Poison Control Center, hospital emergency room, or physician immediately. Contains 2-Butoxyethanol, which upon prolonged or repeated exposure, may cause blood damage based on animal data. Can beabsorbed through skin. WARNING: This product contains chemicals known to the State of California to cause cancer andbirth defects or other reproductive harm. DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN.FOR PROFESSIONAL USE ONLY. SEE MATERIAL SAFETY DAT©2013 The Sherwin-Williams Company Page 3 of 3 AS3239 6/10/2013