Plumbing Pumps & Aerators - Mavik Marine

Scuppers - HoseT-H Marine Flush Mount Scupper AssemblyPerko Fig. 365 Scupper Valve AssemblyT-H Marine Recessed Threaded Thru-Hull Scupper641868(SA-2B-DP)$10.98 I237126(0365 DP)$20.98 I641832(RFTH-2)$20.98 I• Designed to mount over a drain tube or to mountdirectly to a 1-1/2" thru hull with four screws.• Features the same “curl proof” flapper as therecessed scuppers above.• Will retrofit other manufacturers' rubberflapper assemblies.• White frame/black flapper.T-H Marine Inline Scuppers• For surface mount applications.• Molded white plastic with soft black flapper valve.• Does not include thru-hull and mounting hardware.• Flange OD 2-7/8".• Uses #6 fasteners.T-H Marine Duckbill Scupper641860(DBS-2-DP)$14.98 I• Molded of a flexible thermo-plastic thatis totally impervious to the effects of sunand chemicals.• Will not curl up, rot or lose their sealing ability.• This thru-hull type scupper is barbed to fit 1-1/2"ID hose.• The threaded portion accommodates hulls up to3-1/2" thick.• Mounting nut is included.• White.Perko Fig. 323 Thru-Hull Scupper• Prevents backwash.• Chemical resistant materials.• Thermo-plastic flapper.• Black.Order No. Mfg. No. / Description Price247736 (ILS-750) Fits3/4" Hose $20.98 I247737 (ILS-1200) Fits1-1/8" Hose $20.98 I247746 (ILS-1500) Fits1-1/2" Hose $20.98 I• Tough thermoplastic flapper.• Seals tight under water pressure.• White.Perko Fig. 285 Cockpit Scupper536777(285 DP)$24.98 I• Molded white plastic.• Soft black flapper valve.• Maximum hull thickness2-1/8" for 1-1/2" hose.• Flange OD 2-7/8".• Complete with nut and mounting hardware.537360(323 DP)$48.98 IT-H Marine Cockpit Scupper DrainPlumbing, Pumps & Aerators528T-H Marine Flapper Scupper Repair Kit• Repairs most scuppers.• Kit contains: 2 each 1/2",1" and 2" black flappers,keepers and fasteners.Marpac Bilgeflex Hose641867(FSRK-1-DP)$16.98 I• Heavy corrugated polyethyleneconstruction with custom moldedcuff every foot for easy installationand clamping.• Excellent flexibility.• Ideal for electric and manual bilgepumps and livewell aerators.• Resists heat, cold, sea water, ozone andoily bilge acids.• Quality tested for marine applications.Order No. Description Price7-2755 3/4" x 10' $19.98 G7-2760 1-1/8" x 10' $26.98 G• Molded white plastic.• Flush mount.• For use when discharge is above the waterline.• Insert prevents passage of large objects withoutrestricting waterflow.• Maximum hull thickness 1-3/4" for 1-1/2" hose.• Flange OD 2-3/4".Marpac RNF Bilgeflex Hose• Smooth, clear PVCtube with black PVChelical rod.• Excellent flexibility and bend radius.• For use in bilge pump discharge, livewellcirculation and scupper.Order No. Description Price7-2770 3/4" x 10' $27.98 G7-2775 1-1/8" x 10' $37.98 GT-H Marine Floor Drains641862(CSD-2-DP)$60.98 I• Designed with a flange molded into part to fit into hole so that cut or rawedges are hidden by floor drain.• Molded black plastic.• Mounts with 4 screws.Order No. Mfg. No. / Description Price641452 (FD-2) 4-1/4" OD, Diameter Hole 2-1/2" $7.08 I641464 (FD-4) 5-5/8" OD, Diameter Hole 4" $8.08 IPlace Your Order with Mavik Marine Today: 727.678.2047• This injection molded part is high strengthand UV stabilized.• Fits 1-1/2" drain hoses.• The check ball contained inside the cockpitscupper drain is molded and then ground smoothand round to provide better sealing against reversewater flow that occurs when backing boat.• The overall diameter of the mounting flangeis 3-9/16".• The cockpit scupper drain requires a 2-1/2"diameter hole for installation and mounts withfour number 8 screws (not furnished).• Top of cockpit scupper drain is removablefor cleaning.• 45°.• White.©2011 Mavik Group, Corp.