BODY BUILDER CATALOG - DSC Slovensko, sro

Recommendations

Info

BodyBuilder End Effector SystemBodyBuilder Alignment SystemExplaining the Patented Alignment SystemBodyBuilder Robotic Tooling System offers a patented alignment system, ensuring thatall BodyBuilder components can be adjusted to the original set-up position.Once the BodyBuilder structure bracket mount is secured intoplace during set-up, insert the alignment nut into the octagonalboom channel groove.Be sure the alignment nut is inserted so that when it is slid underthe bracket mount, the set screws can still be accessed outside thebracket mount as shown.AlignmentPin#505311 AlignmentHoleAlignmentNut#505264Slide the alignment nut along the boom groove and underneaththe bracket mount until the hole in the block and the appropriatecalibration hole in the bracket mount is aligned visual.Insert the alignment pin into the alignment hole of the bracketmount, through the alignment nut until it stops in the groove ofthe boom channel.With the alignment pin in place, the alignment nut should notmove. Secure bracket mount in the channel groove by tighteningthe two set screws. Remove alignment pin as it is used as a probefor alignment purposes only.The alignment nut remains in place even when the bracket mountis removed.To order replacement alignment pin or nut, please use thefollowing order numbers:Alignment Pin #505311, Alignment Nut #505264To Replace the Bracket mount, place the assembled bracket mounton the Bodybuilder boom until the alignment holes are visuallyaligned. Insert the alignment pin to secure bracket mount inplace, and tighten the fasteners.32Remove the alignment pin and continuetightening the fasteners to specified torquevalues.Subjec t to Techn ical Modifica ti on s With ou t NoticeU.S. PATENT 6,349,9121-888-DESTACO
BodyBuilder End Effector SystemBodyBuilder Transition Brackets and BlocksCLM-30B-30B 30mm to 30mm (Micro) Transition Bracket AssemblySpecifications:Max. Static Clamp Load:102 N*m [75 ft-lb]Material: AluminumFeatures:• Connects (2) 30mm extrusionsperpendicular to each other.• Lightweight, high-strengthaluminum design.[.24]Ø6.0ALIGNMENTHOLES (2)M6FASTENERS (8)[1.18]30.0[1.00]25.4[.63]15.9[.71]17.9[.24]Ø6.0ALIGNMENTHOLES (4)[.78]19.7[1.18]30.01.1328.6[1.27]32.2[2.82]71.6[.78]19.71.2030.4[2.13]54.0REF[2.00]50.8[2.13]54.0[.24]Ø6.0ALIGNMENTHOLES (2)[2.13]54.0[2.13]54.0Model NumberCPI-CLM-30B-30B1-888-DESTACOWeight.24 kg [.54 lb]Sub ject to Tech nical M odi fi cations Wi thout Notic e33
Page 1 and 2: BODYBUILDER END-EFFECTOR SYSTEMMARC
Page 3 and 4: BodyBuilder End Effector SystemBody
Page 7: BodyBuilder End Effector SystemBody
Page 12 and 13: Ø6.0ALIGNMENTHOLES (4)[2.13]54.0Bo
Page 21 and 22: .30]60.0.92]25.05]8[.47]12.0. (2)0
Page 31: BodyBuilder End Effector SystemBody
Page 39 and 40: 21.0[1.77]45.024].0NT(2)BodyBuilder
Page 45 and 46: BodyBuilder End Effector System60B-
Page 61 and 62: [2.04]51.7BodyBuilder End Effector
Page 79 and 80: BodyBuilder End Effector SystemSpec
Page 83 and 84:
BodyBuilder End Effector SystemBody
Page 85 and 86:
BodyBuilder End Effector SystemBody
Page 87 and 88:
BodyBuilder End Effector SystemDE-S
show all

BODY BUILDER CATALOG - DSC Slovensko, sro

Create successful ePaper yourself

Delete template?

Save as template?