Testing Equipment - Eurobasegroup LTD

75Beijing TIME High Technology Ltd.www.timeinstrument.comStandard Delivery●Power box 1●Magnetic yoke(≥55N) 1●Power cord 1●Light bulb (5W/12V) equipped with horse-shoe probe 5●Fuse (5A) 5●Instruction manual 1●TIME certificate 1●Warranty card 1Brief Introduction● CJE-2A electromagnetic yoke, horseshoe-typedetector is to use magnetic iron yoke on theworkpiece by AC and DC magnetization. It cando magnetized testing of various components,including the partial magnetization inspection oflarge components. It is composed of non-contactswitch made of silicon, with little noise and longservice life. It has small size, light weight, largelifting force and adjustable joints, especially fordetection of flat welds, fillet welds, pressurevessels, piping and components with complexshape. Its output voltage is low, which is suitablefor the equipment that does not allow high-voltageto enter.Technical SpecificationModelCJE-2AInput voltage AC 220V ± 10%VOutput voltageAC 36VOutput current>10AMagnetization methodACProbeALifting force≥55N(5kg)Temporary load rate 50%TCJE-2AMAGNETIC YOKE FLAWDETECTORDistance betweenA)magnetic yoke probe polesB) horse-shoe probe polesC) ring-type magnetic polesDimensionNet weightA): 0~255mmB): 0~160mmC):Φ150mm 1800ATNote: Three probes are in commonuse, but only one with a random inthe standard delivery.230×160×120mm5kg