Safety Data Sheet - MOL Hydro HM 32 AL (pdf, 92 kB)
Safety Data Sheet - MOL Hydro HM 32 AL (pdf, 92 kB)
Safety Data Sheet - MOL Hydro HM 32 AL (pdf, 92 kB)
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Trade name:<strong>MOL</strong> <strong>Hydro</strong> <strong>HM</strong> <strong>32</strong> <strong>AL</strong> ashless hydraulic oilVersion: 1 Latest revision: Date of issue: 20. 06. 2007 Page: 4/(8)Personal protection:Respiratory protection:Hand protection:Eye protection:Skin protection:Other special:Breathing apparatus not required.Oil resistant gloves (EN 374, Breakthrough time 480 min;Permeation performance level: 6) (e.g. nitrile rubber –minimal thickness 0.33 mm).Protective goggles not required.Protective clothing (oil resistant).General protective measures / hygiene:Avoid contact with skin and eyes. Avoid prolonged breathing of oil vapours or mists.Ensure washing facilities after working hours and before breaks. Take off contaminatedor oil-soaked clothing, wash with warm water and soap.9. Physical and chemical propertiesAppearance:Physical state:liquidColour:yellow, clearOdour:characteristicChange in physical state:Pour point (ISO 3016):typ. -27°CBoiling point:Others:Flash point (COC) (EN ISO 25<strong>92</strong>): typ. 225°CIgnition point (EN ISO 25<strong>92</strong>):not availableAutoignition temperature:not availableExplosive properties:not explosiveOxidizing properties:Vapour pressure at 20°C:negligibleDensity at 15°C (EN ISO 12185): typ. 0.873 g/cm 3Solubility in water:practically insoluble in waterSolubility in other solvents:gasoline, kerosene, toluene, etc.n-Octanol/water partition coefficient: not availableVapour density:not availableEvaporation rate:not availableHeating value:inf. 38 000 kJ/kgKinematic viscosity at 40°C (EN ISO 3104): typ. <strong>32</strong>.8 mm 2 /sKinematic viscosity at 100°C (EN ISO 3104): typ. 5.45 mm 2 /spH:not applicableUtolsó nyomtatás:
Change language