cuttingFor contaminate-free wheels,see SGA60U and A60T.<strong>Bullard</strong>’s Type 27 cutting wheelsare manufactured for speedy,precise cutting for little burron ferrous and non-ferrousmetals. In tight situations,flush cutting is made easierby allowing more of thewheel to come closer tothe work surface.TYPE 27angle grinderCUT-OFF WHEELSMax ForceMax Force thin cut-off wheels turn your grinder into aturbocharged cutting machine. These are the fastestcutting and longest lasting wheels we have ever designed– they tackle every type and cross-section of material withimpressive results. If you are a using a high powered grinderand want to maximize performance, Max Force wheels arethe ones that will get you to the winner’s circle.High EnergyHigh Energy thin cut-off wheels blend performance withextended wheel life. They are a slightly thicker versionof their smaller siblings the Lightning wheels, yet stillmaintain the rapid cutting action characteristics of thethinner wheels.LightningLightning are the “thinner” version of the High Energyformulation. All the same great performance with slightlyfaster cutting speed and smaller cut-line in the material<strong>be</strong>ing worked on. Due to their thinner profile, Lightningwheels are a bit more flexible for getting into tight areas.CompetitorCompetitor wheels are an entry level, general purposecutting wheel for all applications.When challenging cutting applications arise,try our 3/32” thick wheel for longer life anddurability. For more specialty cutting and grinding,we offer our new 5/64” triple reinforcement cut,grind and debur combo wheels.24
• SGA60U»»Main application - stainless steel and hightensile alloys.»»Contaminant-free cutting of stainless steel.»»No iron, sulfur or chlorine.»»Long life, faster cutting .045 thick cuttingwheel specifically designed to cut allforms of stainless steel, high tensile alloys,chromes and Inconel ® alloys.• ZA60T»»Main application - stainless steel andhigh tensile alloys.»»Secondary application - ferrous metals(structural steel, iron, welds, etc).»»A thin .040 performance wheel.»»Zirconia grain - specially designed forfaster cutting and long life.•• ZA30R»»Main application - stainlesssteel and high tensile alloys.PIPELINEM E TA L»»Secondary application -ferrous metals (structural steel,iron, welds, etc).»»A thicker 1/8” wheel for increasedperformance.»»Zirconia grain - specially designed forfaster cutting and long life.»»Proven performer on pipelineapplications requiring cutting andnotching with a single wheel.I N L E S SS TAperformance levelMax Forcepart# max rpm dimensions qty42407 13,300 4¹⁄₂ × .045 × ⁷⁄₈ 2542507 12,200 5 × .045 × ⁷⁄₈ 2542607 10,200 6 × .045 × ⁷⁄₈ 25performance levelMax Forcepart# max rpm dimensions qty14405 15,000 4 × .040 × ⁵⁄₈ 2514407 13,300 4¹⁄₂ × .040 × ⁷⁄₈ 2514507 12,200 5 × .040 × ⁷⁄₈ 2514607 10,200 6 × .040 × ⁷⁄₈ 2514707 8,500 7 × .040 × ⁷⁄₈ 25performance levelMax Forcepart# max rpm dimensions qty14433 15,000 4 × ¹⁄₈ × ⁵⁄₈ 2514437 13,300 4¹⁄₂ × ¹⁄₈ × ⁷⁄₈ 2514438 13,300 4¹⁄₂ × ¹⁄₈ × ⁵⁄₈-11 1014537 12,200 5 × ¹⁄₈ × ⁷⁄₈ 2514538 12,200 5 × ¹⁄₈ × ⁵⁄₈-11 1014637 10,200 6 × ¹⁄₈ × ⁷⁄₈ 2514638 10,200 6 × ¹⁄₈ × ⁵⁄₈-11 1014737 8,500 7 × ¹⁄₈ × ⁷⁄₈ 2514738 8,500 7 × ¹⁄₈ × ⁵⁄₈-11 1014937 6,500 9 × ¹⁄₈ × ⁷⁄₈ 2514938 6,500 9 × ¹⁄₈ × ⁵⁄₈-11 10• TA60U»»Main application - ferrous metals andstainless.»»Premium long life, faster cutting, .045thick cutting wheel.»»A rigid, thicker wheel with improvedgrain and resin combination to takeon the most demanding cuttingapplications.• A60T»»Main application -ferrous metals (iron, steel,welds, etc) and stainless.»»Contaminate-free formulation forstainless steel applications.NEWperformance levelHigh Energypart# max rpm dimensions qty24409 13,300 4¹⁄₂ × .045 × ⁷⁄₈ 2524509 12,200 5 × .045 × ⁷⁄₈ 2524609 10,200 6 × .045 × ⁷⁄₈ 25performance levelHigh EnergyCOMBO WHEELCutting, Grinding,Deburring & Blendingpart# max rpm dimensions qty42414 13,300 4¹⁄₂ × ⁵⁄₆₄ × ⁷⁄₈ 2542514 12,200 5 × ⁵⁄₆₄ × ⁷⁄₈ 2542614 10,200 6 × ⁵⁄₆₄ × ⁷⁄₈ 25Type 27 angle grinder wheels continues...25