ESR II INSTALLATION SYSTEM FRAME - Kaldewei

The right waste fitting forevery needThe choice is yours. Depending on the setting of the installation and the individual requirements, you can choosethe appropriate waste fitting for the ESR II.For ARRONDO, CORNEZZA, FONTANA, LADOPLAN, SUPERPLAN and SUPERPLAN XXL:Special waste fitting:• Standard waste fitting withdrain-off connection• Drainage capacity: 0.6 l/s• Installation height: 80 mm• Chrome waste cover• Complies with EN 274Special waste fitting 60 mm:• Extra slim waste fittingwith drain-off connection• Drainage capacity: 0.5 l/s• Installation height: 60 mm• Chrome waste cover• Does not comply with EN 274Special waste fitting Plus:• Waste fitting with increaseddrainage capacity anddrain-off connection• Drainage capacity: 0.85 l/s• Installation height: 90 mm• Chrome waste cover• Complies with EN 274Special waste fitting, vertical:• Waste fitting, verticalwith drain-off connection• Drainage capacity: 0.6 l/s• Installation height: 80 mm• Chrome waste cover• Complies with EN 274For CONOFLAT:KA 120:• KA 120 withdrain-off connection• Drainage capacity: 0.85 l/s• Waste cover, enamelled• Complies with EN 274• Easy to cleanKA 120, vertical:• KA 120, vertical, withdrain-off connection• Drainage capacity: 1.4 l/s• Waste cover, enamelled• Complies with EN 274• Easy to cleanFor Superplan plus:KA 125:• KA 125 withdrain-off connection• Drainage capacity: 0.85 l/s• Waste cover, enamelled• Complies with EN 274• Easy to cleanKA 125, vertical:• KA 125, vertical, withdrain-off connection• Drainage capacity: 1.4 l/s• Waste cover, enamelled• Complies with EN 274• Easy to clean8 9