SAMSON AGRO INCORPORATOR CM/CMX

Why you should buythe SAMSON AGRO CMIncorporator» Long life• The frame is made of high-strength Domex 600 steel• The construction is strong and consists of well intgrated parts increasing the strength of the equipment» High efficiency• The distance of 25 cm between the tines is very effectiveand provides good through-passage . This leads to lessdowntime and higher efficiency.• The packer roller ensures a consistent depth control/uniform depth and provides a reconsolidation of the soilafter the tines. This reduces the evaporation from thesoil surface and at the same time gives a surface readyto sow in.» Optimal spreading of slurry- optimum yield• The heavy-duty tines can be relied on for effective workin stubble and hard soil types. Slurry can be positionedup to a depth of 15 cm. This efficient positioning ofthe slurry at such depth enables the optimal utilizationof the nutrients in the slurry and helps to significantlyreduce odors• The vertical distributor provides a high dosage accuracyand can deliver 10t/ha to 20t/ha at a normal drivingspeed. The incorporator thus offers a high flexibility withregards to the dosage of the slurry.

Good ground clearancePlant remains passes easier through the CMX incorporatordue to the greater height under the frame. Theorganic material cannot build-up and under the frame.3 row frameThe triple row design gives more distance between thetines so that larger amounts of plant material can passthrough the incorporator.High and powerful tinesThe tines are very strongly built, so they can work inheavy soils.Adjusting the following harrowIt is possible to adjust the working depth and theangle of the following harrow on two handles. Thisleaves the field flat. And the slurry is covered well.This results in lower evaporation.Continuous adjustmentof the working depthContinuous adjustment of theworking depth is possible using thespindle. The wheel position determinesthe working depth and thus thedepth in which the slurry is positioned.Stone trap onthe distributorThe vertical distributor has a stonetrap integrated, which protectsthe distributor. The stone trap canbe emptied via the hydraulic gatevalve which can also be fitted withan automatic closing function.Transport widthof 3 metersThe CMX incorporator sections canbe folded up to a transport widthof three meters. The incorporatorcan also be folded during storage.

Why you should buy theSAMSON AGRO CMX incorporator» Long life• Strong and robust constructed• The frame is galvanized» High efficiency• Working width of 32 cm between the tines• Double wheels ensures an accurate injection depth• The harrow is angle and working depth adjustableensuring that the field is nice flat after the injection» Optimal spreading of slurry– optimum yield• Heavy-duty tines enables the reliable injection of slurryin the heavier soil types and in all types of stubble.Slurry can be positioned up to a depth of 22 cm. Thiscontrolled placement of the slurry in these greaterdepths leads to a reduced evaporation of nitrogen and asignificant reduction of odors• The vertical distributor provides a high dosage accuracyand can deliver securely so 10t/ha to 20t/ha at a normaldriving speed. The incorporator thus offers a highflexibility with regards to the dosage of the slurry.Slurry injection with CM 7,5Good reasons to incorporateInjecting the slurry gives a much more controlled positioning ofthe slurry than spreading the slurry by a drip hose boom andthen plowing the field afterwards. Also, the loss of ammonia/nitrogen due to evaporation is minimized, because the surfacearea of the slurry is reduced when it is incorporated in furrows.But also because the slurry no longer have contact with theair. Studies have shown that injecting slurry in grass crops limitsthe evaporation of ammonia/nitrogen by 20 to 75 percent comparedto applying the slurry with a drip hose boom.In addition, a larger quantity of the slurry is available to theplants because it is positioned directly at their roots. The lowervolume of slurry when injecting – as opposed to the applicationof slurry with drip hose booms – ensures that the nutrients fromthe slurry are better preserved, because the micro-organisms inthe soil have limited access to it. Other undesirable seeds andplant roots in the field are also denied full access to the slurrywhen it is directly injected into the furrows.Furthermore, the incorporation of the slurry results in reducedodor during the application.

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTTolerance class goes also for non measured angles of 90°D D M M Y YD D M M Y YPRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTHTolerance class goes also for non measured angles of 90°D D M M Y YD D M M Y YReproduction not permitted, may not be distributed,without written authorization from Samson Agro A/STechnical specifications CM/cmxCMCM 6IncorporatorCM 6 7,5IncorporatorWorking width [m] L 6 7,5Transport width [m] B 2,96/3,14* 2,96/3,14*Transport height on ground [m] H 2,7 3,7Number of cutters / diameter [mm] 24 30Power: [HP/m] 8 - 10 8 - 10weight [kg] 2250 2450*Transportbredde med kraftige tænderPRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT654321PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT65432DCMXDDCBL>0,5≤3CBA6CMX 5526,1 6,7 kgPart number Weight3 6 Title:Format Sign Date of creation3D:mgr6 30A3 30-10-20132D:MGR30 120Scale Surf. treat.Working A width [m] L A120 4001 : 25 6,7 8,6400 1000Part without surf. treat. Sheet1000 20001 of 12000 4000DenmarkPart numberRev.Reproduction not permitted, may not be distributed, copied or used by third parties,DS/ISO 2768-1 & -2 without written authorization from Samson Agro A/S. All rights reserved.samling-1Transport6height on ground5[m]43H20,5363012040010002000≤3630120400100020004000Title:MaterialDenmar2SAMSON AGRO A/S / Vestermarksvej 25 / DK-8800 Viborg / Tel. +45 8750 9300 / Fax +45 8750 9301 / www.samson-agro.com