04.12.2012 Views

SCHWEGO pur 8050 - Bernd Schwegmann GmbH & Co. KG

SCHWEGO pur 8050 - Bernd Schwegmann GmbH & Co. KG

SCHWEGO pur 8050 - Bernd Schwegmann GmbH & Co. KG

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>SCHWEGO</strong> ® <strong>pur</strong> <strong>8050</strong><br />

Rheological additive, VOC-free<br />

<strong>Co</strong>mposition: Polyurethane dispersion<br />

Properties: <strong>SCHWEGO</strong> ® <strong>pur</strong> <strong>8050</strong> is a non-ionic thickening additive, which has a<br />

beneficial influence on the rheological properties of aqueous paint and<br />

varnish systems in these respects:<br />

• Thickening effect independent of pH<br />

• Minimum tendency to splatter when using roller<br />

• Effective acceptance of colour when tinting<br />

• High gloss retention<br />

• Good flow and levelling properties<br />

<strong>SCHWEGO</strong> ® <strong>pur</strong> <strong>8050</strong> can be combined with other thickening additives<br />

in order to achieve special effects. The effect of <strong>SCHWEGO</strong> ® <strong>pur</strong> <strong>8050</strong> is<br />

depending on the binder system. The following graph shows the increase<br />

of viscosity in styrene / acrylate dispersions with Schwego ® <strong>pur</strong> <strong>8050</strong><br />

(D=100/s):<br />

Viscosity (1000 mPas)<br />

Ubatol EM 170 Acronal 603 Mowilith 777<br />

Addition (%)<br />

Worleecryl 7111<br />

Applications: <strong>SCHWEGO</strong> ® <strong>pur</strong> <strong>8050</strong> is suitable for interior and exterior wall paints,<br />

water-based coatings and anticorrosive coatings, modified resin plasters<br />

and fillers based on polyacrylates, Styrene copolymers or PU-dispersions.<br />

<strong>SCHWEGO</strong> ® <strong>pur</strong> <strong>8050</strong> shows a high gloss retention in glossy emulsion<br />

paints compared to acrylic and cellulosic thickening additives.<br />

Technical data: Appearance : milky liquid<br />

(Guide values) Density (ISO 2811-1): 1.07 g/cm³<br />

Flash point (ISO 1523) : > 110 °C<br />

Processing: <strong>SCHWEGO</strong> ® <strong>pur</strong> <strong>8050</strong> should be added to the mill base. It is<br />

recommended to investigate the optimum dosage by preliminary<br />

laboratory experiments. An addition of 0.3 - 1.0 % calculated on the<br />

whole system is recommended. For predilution, either butyldiglycol/water<br />

(25/75) or methoxypropanol can be used. Dilution with water only will lead<br />

to viscosity increase.<br />

The above information is based on our current knowledge and experience. No binding assurance in<br />

respect of certain properties or suitability for certain applications must be read into our information.<br />

Patent rights and other proprietary rights must be observed if necessary.<br />

Further safety instructions please learn from our material safety data sheet. 08/2012<br />

<strong>Bernd</strong> <strong>Schwegmann</strong> <strong>GmbH</strong> & <strong>Co</strong>. <strong>KG</strong> · Wernher-von-Braun-Str. 14 · 53501 Grafschaft-Gelsdorf · Germany<br />

Tel.: +49 (0) 2225 9226-0 · Fax +49 (0) 2225 9226-33 · E-Mail: info@<strong>Schwegmann</strong>Net.de · www.<strong>Schwegmann</strong>Net.de


Tip: <strong>SCHWEGO</strong> ® <strong>pur</strong> <strong>8050</strong> has to be stirred up before use.<br />

Packaging: 30 kg / 155 kg drum<br />

Subject to appropriate storage, the described properties of <strong>SCHWEGO</strong> ®<br />

<strong>pur</strong> <strong>8050</strong> remain stable for at least 1 year, provided the original container<br />

is closed after use.<br />

The above information is based on our current knowledge and experience. No binding assurance in<br />

respect of certain properties or suitability for certain applications must be read into our information.<br />

Patent rights and other proprietary rights must be observed if necessary.<br />

Further safety instructions please learn from our material safety data sheet. 08/2012<br />

<strong>Bernd</strong> <strong>Schwegmann</strong> <strong>GmbH</strong> & <strong>Co</strong>. <strong>KG</strong> · Wernher-von-Braun-Str. 14 · 53501 Grafschaft-Gelsdorf · Germany<br />

Tel.: +49 (0) 2225 9226-0 · Fax +49 (0) 2225 9226-33 · E-Mail: info@<strong>Schwegmann</strong>Net.de · www.<strong>Schwegmann</strong>Net.de

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!