C123 SIMPLE ANIM TUTORIAL - 3DPmr

Don't change the position of the figure Only change the point of view of the camera.Check that the number of the Frame is "30" in the window “Anim Controls”Select the c123 Left elix groupGo to the frame number 30Set the Left helix group "Rotate z" parameter to "-720"(The rotation corresponds to two turns of helix) Do the same thing for the right helixNow go to the frame number 15Select the "airplane" groupSet the airplane group "Translate Y" parameter to -0,004Set the airplane "Rotate z" parameter to 0,003(for modify the parameter you must insert manually the value)These modifications create a small airplane movement for give better realism to the animation.That the animation Loop works correctly, it is necessary that the parameters of the last Frame be equalto those of the first Frame.Go to the frame number 30Select the "airplane" groupSet the airplane group "Translate Y" parameter to 0,000Set the airplane "Rotate z" parameter to 0,000Make the Movie:Menu Animation - Make MovieIn the pop-up window set the "Resolution" "Full" or "Half"(If you have a powerful PC you can choose "Full").In the same window set "quality" - "Curren Render setting"and set the value of Motion Blur Amount to 3,000.Leave the other parameters unchanged.Click on the button "OK"Choose the name and path where the file will be saved.Await the frames renderig......Now the c123 Flies!