KLAMFLEX DEDICATED FLANGE ADAPTORS

More documents

Recommendations

Info

TKLAMFLEX FLANGE ADAPTORS : STEEL PIPESFLANGES DRILLED PN10 OR PN16, 1000/3 OR 1600/3 (BS10: A,D,E)AND ANSI 125/ 150NOMBOREPIPEODTOLERANCEON PIPE ODFOR DISTANCE LMINIMUMLENGTHPREPAREDPIPE ENDOD OFENDRINGFLANGEADAPTORLENGTHTABLEFLANGETHICKNESSAPPROX.MASSLABT(mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)506580100125150150200250250300350400450500600700800900100012001400160018002000200060.376.188.9114.3139.7165.1168.3219.1267273323.9355.6406.44575086107118139141016121914201620182020202032+0.8+0.8+0.8+0.8+1.6+1.6+1.6+1.6+1.6+1.6+1.6+1.6+1.6+1.6+1.6+1.6+1.6+1.6+1.6+1.6+1.6+1.6+3+3+3+3-0.8-0.8-0.8-0.8-0.8-0.8-0.8-0.8-0.8-0.8-0.8-1.6-1.6-1.6-1.6-1.6-1.6-1.6-1.6-1.6-1.6-3-3-3-3-3100100100100100100100100100100100150150150150150150150150150150150150150150/ 300150/ 30013415016519122024624630836036441445850955961071281391510161118133515361736193621342146152102102102104106106106109109109153154154155155155155155157165175190190190/ 290190/ 29012121212141616161919192324242525252525273545606060603.13.43.94.56.57.57.51015.514.617.333.539.645.555.670.671.684.490.1118.6198275.9439.1494.1TBATBAFOR COUPLINGS OF 25 AND 40 BAR WORKING PRESSURE PLEASE CONTACT KLAMFLEXThe above table includes samples of the sizes available, please contact KLAMFLEX for any other sizes up to 3500mm.
KLAMFLEX FLANGE ADAPTORS: DUCTILE IRON PIPESFLANGES DRILLED PN10 OR PN16, 1000/3 OR 1600/3 (BS10: A,D,E)AND ANSI 125/ 150NOMBOREPIPEODTOLERANCEON PIPE ODFOR DISTANCE LMINIMUMLENGTHPREPAREDPIPE ENDOD OFENDRINGFLANGEADAPTORLENGTHTABLEFLANGETHICKNESSAPPROX.MASSL(mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)100150200250300350400450500600700800900100012001400160018002000118170222274326378429480532635738842945104812551462166818752082+1.0+1.0+1.0+1.0+1.0+1.0+1.0+1.0+1.0+1.0+1.0+1.0+1.0+1.0+1.0+1.0+1.0+1.0+1.0-3.0-3.0-3.5-3.5-3.5-3.5-4.0-4.0-4.0-4.5-4.5-4.5-5.0-5.0-6.0-6.0-6.0-6.0-6.0100100100100100150150150150150150150150150150150150150150/3002002603083644144805315826347378409441047115013711578178419892196102106106109109153154154155155155155155157165175190190190/290121616191923242425252525252735456060604.57.89.814.717.13237.542.952.566.566.577.982.1108.7180.3244.1382.7TBATBAABTFOR COUPLINGS OF 25 AND 40 BAR WORKING PRESSURE PLEASE CONTACT KLAMFLEXThe above table includes samples of the sizes available, please contact KLAMFLEX for any other sizes up to 3500mm.KLAMFLEX STEPPEDFLANGE ADAPTORSKLAMFLEX RESTRAINTFLANGE ADAPTORSKLAMFLEX Stepped Flange Adaptors can be manufacturedwhere pipe nominal bore is larger (as indicatedabove) or smaller than flange nominal bore.KLAMFLEX Restraint Flange adaptors can bemanufactured where end pull out is of concern.
Page 1: KLAMFLEX DEDICATEDFLANGE ADAPTORSKL

KLAMFLEX DEDICATED FLANGE ADAPTORS

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?