The Archetype® LED - POELEC

SITE/ROADWAYAR LEDThe Archetype®LEDThe Next Generationof LED Site LightingKIMLIGHTING 1Leniseumsan esent lutat lam

The Next Generation of LED Site LightingContents:Exclusive Optical Technology 2Thermal Management System 3Even, Uniform Distribution 4HID to LED Upgrade Kit 6Design Innovation 7Maintenance and Replacement 7Preserving Resources 8Lumen Performance 9LM-79 Compliance 9Ordering Information 10Specifications 12Photometry and BUG Ratings 13WarrantyBack CoverKim Lighting is knownthroughout the world asthe premier designer andmanufacturer of quality,high performance, andarchitecturally relevantoutdoor lighting solutions.Kim Lighting is a division ofHubbell Lighting, Inc.

The Archetype®LEDThe eclectic shape of The Archetype LED readily adapts to and universally complements contemporaryarchitectural design. Lighting performance, materials, innovative construction, and the latest solid statelighting technology combine to make The Archetype LED the state-of-the-art outdoor lighting luminairefor a broad range of applications. The Archetype LED comes in two sizes and is available for pole andwall mount configurations.This is LED site lighting perfection. This is Kim Lighting.KIM LIGHTING 1

Thermal Management SystemDriverCompartmentAir FlowConvectionConductionto HousingSignature Cooling FinsTMDual Heat Management with Exclusive LifeShieldThe Archetype LED luminaires employs two distinct but complimentary methods to managethe life-limiting heat produced by the LED diode. Both conduction and convection areused to disperse heat, thereby maintaining diode performance and long life. Heat is drawnaway from the housing chamber and dispersed into the free air around the luminaire.Additionally, each MicroEmitter module incorporates a solid aluminum heat sink, whichis mechanically secured to the EmitterDeck. The EmitterDeck is composed of a heavygauge aluminum carrier plate and is affixed directly to the housing to dissipate heat to theoutside environment.Protection SystemAUTOMATIC THERMAL SELF-MONITORING AND ADJUSTMENTEach EmitterDeck incorporates two temperature sensors located at the hottest locationsof the backside of the deck. Each sensor sends temperature readings every 30 secondsto Kim Lighting’s exclusive LifeShield Protection System. In extreme conditions, LifeShielddetects above tolerance temperature and automatically lowers the current to the systemto preserve diode life. Lumen output is restored to full capacity once the temperature isstabilized to within acceptable limits. The LifeShield Protection System provides consistentperformance with minimal output reduction in extreme and fluctuating environmentalconditions. See page 9 for further details.LifeShieldProtection SystemTMKIM KIM LIGHTING LIGHTING 1Lenis 3eumsan esent lutat lam

HID Even, to Uniform LED Upgrade DistributionThe Archetype LED is perfect for upgrade projects because communities can safely utilize existing pole installations and stillmaintain uniform illumination between luminaires. Compare Archetype LED’s low max-to-min uniformity ratio to other LEDsystems, and the difference is clear.60' Spacing20'2.38 2.05 2.14 2.05 2.38 2.05 2.14 2.05 2.3880' Spacing20'2.03 1.74 1.45 1.74 2.03 1.74 1.45 1.74 2.03100' Spacing20'1.92 1.36 .87 1.36 1.92 1.36 .87 1.36 1.92* Footcandles readings at one mounting height forward.Uniform, IlluminationKim Lighting’s patent pending MicroEmitter Technology features unparalleled abilityto capture and harness light using an optical system that shapes, points and tightlycontrols the beam of individual clusters of LEDs within independent MicroEmittermodules. The result places light where it is needed, creating superior uniformity byevenly distributing horizontal footcandles and, in turn, reducing energy waste.Catalog Number Wattage Avg. FC Max. FC Min. FC Avg. to Min. Max. to Min.Archetype LED 140 2.25 3.78 1.06 2.12:1 3.57:1150 PMH 185 2.74 4.51 .97 2.82:1 4.65:1200 PMH 240 3.30 5.44 1.16 2.85:1 4.69:1250PMH 291 3.82 6.30 1.35 2.83:1 4.67:1150 HPS 188 2.90 4.19 1.25 2.32:1 3.35:1200 HPS 240 4.10 5.93 1.76 2.33:1 3.37:1250 HPS 295 5.21 7.55 2.25 2.32:1 3.36:1Criteria: Mounting height is 20’, on a street width of 35', and spacing is 100' apart. Luminaires are staggered on each side of the street.Mean Lumens and photopic equipment were used for this data.KIM LIGHTING 4

HID to LED UpgradeHID to LED Upgrade KitEmitterDeck UpgradeabilityExisting Archetype HID installations can now be upgraded to cutting edge LED technology. The Upgrade Kits install in just minutesproviding a value-added upgrade solution. As a Kim Lighting product, the upgrade kit preserves ETL listing to UL standards andmanufacture’s warranty … something that third party retrofits cannot do.Kim Lighting’s MicroEmitter based LED luminaires can also be upgraded to the latest LED technology as it evolves over time.Replacement EmitterDecks featuring the latest LED technology are available exclusively from Kim Lighting.DescriptionTotal LuminaireWattageEnergy Savings(Watt)Energy Savings(Kw)Savings Per Yr @11 Hrs per night@ $0.10 Per Kwh 1THE ARCHETYPE LED 140 - - -150W Metal Halide 185 49 .049 $ 58.07200W Metal Halide 240 104 .104 $ 80.15250W Metal Halide 291 155 .115 $100.63150W HPS 188 52 .052 $ 59.27200W HPS 240 104 .104 $ 80.15250W HPS 295 159 .159 $ 102.23KIM LIGHTING 61Assumes HID lamp replacement every three years, includes labor and lamp.

Design InnovationTool-LessLatchSignatureCooling FinsArm Secured withDraw BoltsLifeShield ProtectionSystemElectronic Driver with0-10V Dimming InterfaceSurge ProtectorTemperedGlass LensOne-piecesilicone gasketDie-Cast AluminumLens FrameMicroEmitter TMModulesIntegral SpecularReflectorAluminumEmitterDeckReplaceable EmitterDeck TMMicroEmitter TMMaintenanceThe Archetype LED EmitterDeck and MicroEmitter modules are modularly design forreplacement in just minutes. No need to remove or go behind the EmitterDeck todisconnect wiring connections.EASY ACCESSStructural LED is designed with tool-less entryto the EmitterDeck and is constructed with aremovable electrical module for easy maintenance.MICROEMITTER MODULE REMOVALA single removable mounting screwholds MicroEmitter module in place.QUICK CONNECT WIRINGOnce the MicroEmitter module is released, slowlypull the wiring through the mounting slot access tothe electrical quick connectors.KIM KIM LIGHTING LIGHTING 1Lenis 7eumsan esent lutat lam

Preserving ResourcesDEPARTMENT OF ENERGY (DOE): Kim Lighting is a strategic partner workingwith the DOE in the development of nationwide SSL standards that balanceefficiency and lighting quality.ROHS/WEEE COMPLIANT: Kim Lighting is doing its part to limit hazardous waste.The Wall Director LED housing and LED components meet strict US and internationalenvironmental protection and recyclability requirements.THE ARCHETYPE LED driver is a 0-10V dimming interface, allowing 0-100% illuminationoutput when synchronized with a control or dimming system. Customers can reducelumen output and energy consumption during unoccupied periods.MADE FROM +90% RECYCLED MATERIALS: The Wall Director LED aluminum housingand reflector components are constructed from more than 90% recycled materials andare entirely lead and mercury free.Contributing to Tomorrow ... TodayKim Lighting is working closely with numerous organizations todevelop industry standards to assure the efficiency, dependabilityand quality of the LED products that are sold to our customers.HID to LED Upgrade Kits are available from Kim Lighting forStructural HID installations already operating in the field. TheUpgrade Kits install in just minutes, providing a value-added upgradesolution. As a Kim Lighting product, the upgrade kit preserves ETLlisting to UL standards and manufacture’s warranty … somethingthat third party retrofits cannot do.Kim Lighting’s LED luminaires and upgrade kits qualify for manyrebate and tax incentive programs nationwide. Always check localutility, state and federal incentive programs developed by the U.S.Department of Energy, as these programs update frequently.www.dsireusa.org is a great resource for current informationon rebate and tax incentive programs nationwide.Kim Lighting offers an exclusive “plus one”guarantee on any LED housing that is upgradedwith a new Kim Lighting LED EmitterDeck.Customers will enjoy an additional 1-yearhousing warranty, free of charge. 11One-year extension includes existing metal housingcomponents. Existing product conditions are taken asthe base point. Participation rules apply. See completewarranty provisions for further details.KIM LIGHTING 8

Lumen PerformanceThe Archetype LED’s exclusive LifeShield Protection System controls lumen depreciation in extreme and fluctuatingenvironments to preserve operational lifespan. Always consult www.kimlighting.com for the most current performance data.110Luminaire Lumen Loss by Hours of Operation120Luminaire Output at Outdoor Ambient Temperatures10090110Lumen Percentage807060504030L-70% of Rated Luminaire Lumens1009080Stabilizes Output Dueto Exclusive LifeShieldProtection SystemHazardous Thermal Environment20Hours of Operation40000 50000 60000 70000 8000020000 30000 9000010000 100000Outdoor Temperature at 10°C/50°F. Temperature is based on continual average, annual assumptions.Outdoor Temperature at 40°C/104°F. Temperature is based on continual average, annual assumptions.70-20°C-4°F-10°C14°F0°C32°F10°C50°F20°C68°F25°C77°F30°C86°F35°C122°F40°C95°F45°C104°F50°C122°F55°C132°FAverage Night Time / Outdoor Ambient Temperature60°C140°F65°C149°F70°C158°FNotes:1. Lumen loss stabilization is a result of Kim Lighting’s MicroEmitter luminaires exclusiveLifeShield ® Protection System and Dual Heat Management.2. The LifeShield ® Protection System will lower the current to the LEDs significantly if theluminaire is exposed to direct heat (sun) or excessive abnormal conditions.3. Luminaire Lumen Loss assumptions are based on LM-80 results and an actual outdoor producttesting based upon 5100K CCT, 350mA drive current, 25°C lab ambient and cathodetemperature at 85°C. Assumptions past 6,000 hours are interpolated.4. Cathode temperature baseline is at 85°C. If cathode temperature increases during ambientchanges and abnormal environment conditions, % of rated lumens will slightly decrease.5. Outdoor ambient temperatures are assumed SITU averages by geographic region.6. As Solid State Lighting technology and thermal management systems continually advance, lumenloss projections are subject to improvement.LM-79-2008 Compliance(INDICATES STANDARD IES FORMATTING)Kim Lighting’s photometric data for The Archetype LEDluminaires is tested to the IESNA LM-79-2008 standard,and Kim Lighting only uses LEDs that are tested to theIESNA LM-80-2008 standard. When evaluating photometricdata for LED luminaires, look for a negative one (-1) in thelumen output space of the photometric data file to assurecompliance with LM-79-2008.Test reports on page 13 reflect photometry performedunder LM-79-2008 standards.Actual Test ReportKIM KIM LIGHTING LIGHTING 1Lenis 9eumsan esent lutat lam

The Archetype LEDOrdering Example:1SA / SAR3 / 60L5K120 / DB / A-25 / PRA20-4188SA/WH1 2 3 4 5-14 151 MountingPlan View:Wall3SY confi guration is available forMountround poles only.SAR EPA: 0.7 1.4 1.2 1.9 1.9 2.5 _Cat. No. : 1SA 2SB 2SL 3ST 3SY 4SC 1WAR EPA: 1.2 2.4 2.0 3.2 3.2 3.9 _Cat. No. : 1A 2B 2L 3T 3Y 4C 1W2FixtureCatalog no. designates fi xtureand light distribution.HOUSINGSAR = Small, 60 LEDs, 73WAR = Large, 120 LEDs, 140WDISTRIBUTION2 = Type II Full Cutoff3 = Type III Full Cutoff4 = Type IV Full Cutoff5 = Type V Square Full CutoffR = Type R Right Full CutoffL = Type L Left Full CutoffLight DistributionType IIType IIIType IVForwardThrowType VSquareType RRightType LLeft3Electrical ModuleSOURCE60 = 60 LEDs (Small)120 = 120 LEDs (Large)COLORTEMPERATUREL3K = 3500KL5K = 5100KL2K = 580nm Amber1 4300K and 6500K are also available onan ”Engineered to Order” basisVOLTAGE120 = 120V208 = 208V240 = 240V277 = 277V347 = 347V 2480 = 480V 22Due to current unavailability of 347V and 480V drivers,specifi cation of these voltages shall feature an integralstep-down transformer. For SAR models only.4FinishSuper TGIC powder coatpaint over titanated zirconiumconversion coating.Color: Stealth Gray Light Gray Platinum Silver White Black Dark Bronze Custom Colors Consult yourCat. No.: SG LG PS WH BL DB CC Kim Lightingrepresentative forcustom colors.5 Wall Mounting:Cat. No.: 1WH"4L"J-boxAdapter Platefor SAR5F"(131.8 mm)4J"(108.0 mm)10J"(260.4.mm)Wall EmbedmentBracket (WEB)for ARSAR Wall MountAR Wall MountSAR Fixture mounts to 3" or 4" junction boxes by a cast aluminum adapter plate withfi xture mounting bolts.NOTE: Junction box in wall must provide adequate fi xture support. See NEC sections370-13, 17 and 410-14, 16. Quick-disconnect plug and wiring are provided to allow fi eldconnections prior to fi xture mounting.AR Fixture mounted to poured concrete walls only. A modifi ed support arm is providedwith side access to allow fi eld splices within the arm. A wall embedment bracket(WEB) is provided to accept draw bolts, and a trim plate covers the wall-embeddedjunction box. All wall mount components are fi nished to match the fi xture.6 Optional PhotocellSensor or Receptacle:Receptacle provided for NEMAbase photocells (by others).A-30 to A-35 Sensorfor SAR onlyA25 Receptaclefor AR onlyCat. No.: A-30 120VA-31 208VA-32 240VA-33 277VA-35 347VA-34 480VA-25Mounting Configuration – Fixture with Photocell 1SA, 1A or 1WReceptacles – slave unit(s) s2SB or 2Bs ss 2SL or 2L 3ST, 3T, 3SY or 3Yss s4SC or 4C7 Optional Dimming Controls:The Archetype LED driver is a 0-10V dimming interface, allowing 0-100% illumination output whensynchronized with a control and dimming system, provided by others. Kim Lighting is working with severalcontrol system manufacturers to develop a variety of proven turnkey solutions to meet any application’sneed. Kim Lighting will advise availability of complete control packages, and even two-way monitoringsystems, once they have been tested and exceed Kim’s high quality standards.KIM LIGHTING 10

Ordering Information8 Optional Convex Glass Lens: Cat. No.: CGL Tempered convex glass lens replaces standard flat lens.NOTE: Brightness control goes from Full Cutoff to Cutoff.Convex Lens9 Optional Poly carbonate Lens: Cat. No.: LS Polycarbonate Lens replaces standard tempered glass lens.Polycarbonate Lens10 Optional Tamper-Resistant Latch:Tamper-Resistant LatchCat. No.: TLStandard die-cast latch is provided with a captive 10-32 stainless steelflat socket-head screw to prevent unauthorized opening. Required onlyfor vandal protection in locations where fixtures can be reached byunauthorized persons.11 Optional HorizontalSlipfitter Mount:SlipfitterCat. No.: HSFReplaces standard mounting arm with a slipfitter for mounting to ahorizontal pole davit-arm with 2" pipe-size mounting end (2C" O.D.).Provides ±5° vertical fixture adjustment.12 Special Options for StreetLighting:Terminal BlockCat. No.: AFCat. No.: TBAir Filter to allow ventilation through the optical chamber.Terminal Block located inside the fixture electrical compartment.(AR) onlyAir Filter13 Optional Vertical SlipfitterMounts:Mounting ConfigurationSARAR1SA 1A - Single arm mnt.2SB 2B - 2 at 180°2SL 2L - 2 at 90°3ST 3T - 3 at 90°3SY 3Y - 3 at 120°4SC 4C - 4 at 90°Pole with 2"pipe-size tenon(by others)VerticalSlipfitterMountby KimCat. No. for 4" Round:Cat. No. for 4" Square:SAR AR SAR ARVSF-1SA VSF-1A SVSF-1SA SVSF-1AVSF-2SB VSF-2B SVSF-2SB SVSF-2BVSF-2SL VSF-2L SVSF-2SL SVSF-2LVSF-3ST VSF-3T SVSF-3ST SVSF-3TVSF-3SY VSF-3Y — VSF-4SCVSF-4C SVSF-4SC SVSF-4CAllows fixtures, with standard support arm to be mounted to poles having a steel 2" pipe-sizetenon (2C" O.D. x 4K" min. length).For existing pole installation or for use with poles provided by others.Note: 3SY available only on round slipfitter.14 Optional Support Arm:NOTE: Refer to Kim Lighting’sArchitectural Arms Catalogfor complete details.Refer to Architectural ArmsCatalog for wall mountingfeature.Swept Swept Upsweep Upsweep Uplift Adjustable Uplift AdjustableSolid Arm Hollow Arm Solid Arm Hollow Arm Aluminum Arm Stainless Steel ArmSAR AR SAR AR SAR AR SAR AR SAR AR SAR ARCat. No.: AA02 AA01 AA04 AA03 AA06 AA05 AA08 AA07 AA10 AA09 AA12 AA11EPA for Fixture and ArmMounting 1 : SAR AR SAR AR SAR AR SAR AR SAR AR SAR AR1SA / 1A 0.8 1.4 0.7 1.1 1.0 1.7 0.8 1.2 1.2 1.9 1.2 1.92SB / 2B 1.6 2.8 1.4 2.2 2.0 3.4 1.6 2.4 2.4 3.8 2.4 3.82SL / 2L 1.3 2.2 1.2 1.9 1.5 2.5 1.3 2.0 1.7 2.7 1.7 2.73ST / 3T 2.1 3.6 1.9 3.0 2.5 4.2 2.1 3.2 2.9 4.6 2.9 4.63SY / 3Y 2.1 3.6 1.9 3.0 2.5 4.2 2.1 3.2 2.9 4.6 2.9 4.64SC / 4C 2.7 4.3 2.5 3.7 3.0 4.9 2.7 3.9 3.5 5.3 3.5 5.315 Poles:See Kim Pole Catalog for a complete selection of round and square poles in aluminum or steel.Lexan is a registered trademark owned by GE Advanced MaterialsKIM LIGHTING 11

SpecificationsSARSmall LED60 LEDsMaximum Weight:30 lbs.Maximum SystemWatts = 73 W6"(152 mm)TOP5"(127 mm)ARLarge LED120 LEDsMaximum Weight:50 lbs.Maximum SystemWatts = 140 W8"(203 mm)TOP8"(203 mm)FRONT4J"(108 mm)17B"(435 mm)SIDE17B"(435 mm)FRONT22K"SIDE22K"1L"(45 mm)Armcross-section12"(305.mm)BOTTOMLens shall be clear, tempered glassLED reflector module not shown6"(152.mm)2"(51 mm)Armcross-section16"(406 mm)BOTTOMLens shall be clear, tempered glassLED reflector module not shownHOUSING: One-piece die-cast, low copper (

PhotometryType III - 120 LED-3-2-1HOUSE STREET012321.5.2.13210123BACKLIGHT1086 lm. 17.4%BVH 90° = 0.7%4UP LIGHT0 lm. 0%180°UH100°UL100° FORWARDLIGHT5149 lm. 82.6%FVH 90° = 2.5%LM-79-2008 Test ResultsReport Number KL02057Mounting Height 20 Feet4BH 80° = 8.8%BM 60° = 6.1%FH 80° = 40.1%FM 60° = 34.2%Light Dist. TypeTotal FluxType III6235 Lm.BL 30° = 1.8%FL 30° = 5.7%System Watts140W0°Type V - 120 LED321 1 .5.21234UP LIGHT0 lm. 0%180°1HOUSE STREET01LM-79-2008 Test ResultsReport Number KL0205223.13210BACKLIGHT3228 lm. 49.9%BVH 90° = 1.3%BH 80° = 19.9%UH100°UL100° FORWARDLIGHT3240 lm. 50.1%FVH 90° = 1.7%FH 80° = 20.1%Mounting HeightLight Dist. Type20 FeetType V4BM 60° = 23.6%FM 60° = 23.3%Total Flux6468 Lm.BL 30° = 5.0%FL 30° = 5.0%System Watts140W0°Log onto www.kimlighting.com and download photometric files from Kim Lighting’s IES File Library.For custom optics and color temperature configurations, contact factory.KIM LIGHTING 13

The Archetype®LEDWhen properly installed and under normal conditions of use, Kim Lighting warrants The Archetype LED products(”Product(s)”) sold by Kim Lighting to be free from defects in material and workmanship for (i) a period of fi ve (5) years formetal parts, (ii) a period of ten (10) years for exterior housing paint fi nish(s), (iii) a period of six (6) years for LED LightEngines (MicroEmitters) and, (iv) a period of fi ve (5) years for LED power components (LED Driver, LifeShield Device, SurgeProtector), from the date of sale of such goods to the buyer as specifi ed in Kim Lighting shipment documents for eachProduct(s). Occupancy sensors, LED drivers, dimmers and relay wiring components are covered by the manufacturer’swarranty. The buyer agrees to make all claims regarding defects or defi ciencies in the Product(s) according to the terms ofKim Lighting’s offi cial warranty. Warranty claims must be made in writing according to Kim Lighting procedures existing at thetime of the claim. Valid warranty claims must be made within the warranty period specifi ed herein above, and submitted withinthirty (30) days of discovery of the damage or defect. No FIELD labor, repair, DISMANTLE, or installation charges are includedwith this warranty. Kim Lighting may repair or replace any Product(s) covered by this warranty at its sole discretion and inaccordance with its procedure. Any unauthorized return, repair, replacement or modifi cation of the Product(s) shall avoid thiswarranty. This warranty applies only to the use of the Product(s) as intended by Kim Lighting and does not cover anymisapplication or misuse of said Product(s), or installation in hazardous or corrosive environments. In no event shall KimLighting’s total liability for any reason arising hereunder exceed the purchase price paid to Kim Lighting for the productpurchased by the buyer hereunder. Contact Kim Lighting for complete warranty language, exceptions, and limitations.Additional Kim Lighting Premium LED FamiliesWARP9 ® LEDSITE / ROADWAYStructural ® LEDSITE / ROADWAYWall Director ®WALL MOUNTPGL7 LEDPARKING STRUCTURELED LandscapeCollectionLED ArchitecturalLightingLED CompactFloodlightLED SiteWall Forms ®www.kimlighting.comMAILING ADDRESSP.O. BOX 60080CITY OF INDUSTRY, CA91716-0080BUSINESS ADDRESS16555 EAST GALE AVENUECITY OF INDUSTRY, CA 91745PHONE: 626.968.5666FAX: 626.369.2695Printed in U.S.A.93029365Version 1.2 (6/11)BECAUSE OF CONTINUING PRODUCT IMPROVEMENT PROGRAMS, KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.ENTIRE CONTENTS © COPYRIGHT 2009 KIM LIGHTING INC. ALL RIGHTS RESERVED REPRODUCTION IN WHOLE OR IN PART WITHOUT PERMISSION IS STRICTLY PROHIBITED.