Download Our Stringing Guide - Brine

Recommendations

Info

CROSS LACING (CONT)Continue underneath theleather and string up throughthe hole that the opposite sideof the cross lacing created.7Pull through, and travelunderneath the cross lace tostart this process again.Before moving on, check thefront of your stick to make sureyour lacing has laid flat againstyour leather.Make sure to keep even tensionall the way down. When youreach the bottom, string troughthe last hole in the sidewall andsecure your knot.*note* Repeat this identical process on theopposite side.knot∆BRINE lacrosse stringing manual - page 12
SHOOTING STRINGS(ToP SHOOTER)Starting on the left hand of the side of the head, pull your shooterthrough 2nd hole from the top in the sidewall. Make sure the stringis even on both sides.Start with the bottom piece,travel over the cross lace,behind the leather, over thecross lace, and continue behindthe pocket piece as a whole.*note* When you come back through with thetop piece you will create a twist between thepocket piece.BRINE lacrosse stringing manual - page 13
Page 2 and 3: introductionThis tutorial is design
Page 4 and 5: SIDEWALL STRINGTake one of the mids
Page 6 and 7: Top String & POCKET PIECE(CONT)Next
Page 8 and 9: LeathersWith the smooth side facing
Page 10 and 11: CROSS LACING (CONT)Using the left s
Page 14 and 15: SHOOTING STRINGS(ToP SHOOTER) CONT.
Page 16 and 17: U-ShooterStrarting from the right s
Page 18 and 19: U-Shooter (CONT.)Loop under the sho
Page 20: FINISHING TOUCHESYour final product

Download Our Stringing Guide - Brine

Create successful ePaper yourself

Delete template?

Save as template?