Download Our Stringing Guide - Brine

Recommendations

Info

LeathersWith the smooth side facingyou feed the tip of the leather inthrough the first scoop hole.Next, feed the tip of the leatherdown through the first slit of theleather.Pull the leather all the way through the slit, leaving a small amountof slack where the leather meets the scoop so you can string yourcross lacing through it.BRINE lacrosse stringing manual - page 8
Leathers (cont)Pull the leather down throughthe inner throat hole on thecorresponding side.Repeat this process to attachthe second leather piece.*note* Tying your pocket nylons and excessleathers around the front of the throat willhelp keep everything tight while stringingthe cross lace.CROSS LACINGTake one of your 80in cross lace pieces and feed it through theleather, where you left space at the scoop. Tighten your leatherpiece so there is no room between the leather and the scoop.Make sure you have an even amount of cross lace on both sides.BRINE lacrosse stringing manual - page 9
Page 2 and 3: introductionThis tutorial is design
Page 4 and 5: SIDEWALL STRINGTake one of the mids
Page 6 and 7: Top String & POCKET PIECE(CONT)Next
Page 10 and 11: CROSS LACING (CONT)Using the left s
Page 12 and 13: CROSS LACING (CONT)Continue underne
Page 14 and 15: SHOOTING STRINGS(ToP SHOOTER) CONT.
Page 16 and 17: U-ShooterStrarting from the right s
Page 18 and 19: U-Shooter (CONT.)Loop under the sho
Page 20: FINISHING TOUCHESYour final product

Download Our Stringing Guide - Brine

Create successful ePaper yourself

Delete template?

Save as template?