GEM-SOL LATCH COIL - Netafim

BACCARAGEM-SOL LATCH COILGeneral DescriptionThe GEM-SOL Latch coil is designed to bemounted on the "operator" to set up asolenoid valve.The coil, including its magnetic circuit andconstant magnets, is encapsulated in hightemperature resistant nylon to withstandhumidity and heavy duty requirements.NotesThe latch coil should only be used with asuitable GEM-SOL operator.For outdoor applications or when the coil isexposed to high humidity, we recommend theuse of impregnated coils.Baccara is able to manufacture latch coils fora wide range of voltages, from 3V to 220V.However, in order to select the appropriate coil foran application, further information is required:operating voltage, operating method and switchingtime.Filling in the following application form will enableus to determine the most suitable coil. Pleaseconsult our technical sales department forfurther assistance.Applicationname/numberTo be filledin by customerVoltage OperatingMethod3691224230OtherDirectCapacitorMax.Current[A]on coil----

Technical SpecificationsCoil winding insulation: H 180Temp Range:Protection:Electric data:Voltage variation:Electric connection:O-20 C to 150 CIP65 with connectorSee tableNominal 10%, over voltage category IIAMP pins, DIN 46242, 2 poles + 1 earth2 flying leads, AWG18 300mm lengthJunction box: DIN 43650Cable exit:PG9 or 1/2" NPTAssembly:In any positionFixing:One nut G1/4" hexagonal 19mmWeight:100gr.OO+ -SV-3-05DimensionsGEM-SOL withFlying Leads1.4