Optigreen Edge Trims – Type SKL - Optigreen Green Roofs

Multiple functions,one system, great value!Optigreen Edge Trims – Type SKLMultifunctional- Separates gravel from roof-greening structures- Termination strip for borders, facades,openings, etc.- Delimiter for roof-greening structures- Design element e.g. delimiters in gravel borders- Water channel in open drains- Facade drains- Keeps drainage areas free from substrate(i.e. symphonic drainage)Fields of application: - Flat roofs and those with a slight pitch (0 – 5°)- Extensive roof-greening and ballasted roofsMaterial:- Black recycled plastic, UV stabilised, 5 mm thick,variety of lengths and heightsAdvantages: - Low priced and manufactured sustainably,utilising recycled plastic- Multifunctional: separation, termination and water drainage- Click system for fast and simple installation- Greater stability than thin aluminium strips- Multifunctional strip shapes using plastic technologies thatcannot be achieved with metal strips- Compatible with a wide range of Optigreen System Solutions

Optigreen Edge Trims – Type SKLDenomination Height (mm) Length (mm)SKL-80-1100 80 1100SKL-120-1100 120 1100SKL-80-300 80 300SKL-120-300 120 300SKL-Distance Plate 20 390Installation:The Optigreen Edge Trims Type SKL can be linked very quicklyto form long, straight units thanks to the hinge and click connectors.Special connectors are not required.In addition, the hinge-connectors allow interior and exterior corners of90 degrees. For the installation of flexible or tight arches the 300 mmelement are used.Separation of gravel from green-roofs:Until now, separation between gravel and vegetation was achieved eitherwith expensive aluminium gravel strips or with folded membrane, bothoptions were usually optically and technically unsatisfactory as well astime-consuming during installation.The Optigreen Edge Trims Type SKL are more cost-effective and more stablethan aluminium. Unlike membrane, they can be installed quickly andcleanly, creating a definite boundary that allows the flow of water but notof the substrate.On the internal side of the Optigreen Edge Trims Type SKL you will findslide in guides, (see below)into which the Optigreen-Solid Drainage FKD25 can be inserted. Moreover, this prevents movement of the substrateand fine-particle drainage-contamination when no filter membrane isused, as is the case of the Optigreen Economy Roof.Drainage Channels:Large, extensive roof-greening with modern and efficient syphonic drainagesystems require quick disposal of excess rainfall.Distance plates, sold as accessories, connect the Optigreen Edge TrimsType SKL to parallel strands which conform an open or closed (with cover)channel.These channels possess various connecting points, to which you may connectOptigreen Drainage Elements and Optigreen- Triangle Profiles.Therefore, water from the greening structure will be derived speedily andwithout tailback to the syphonic drainage system.Optigreen Limited235 Old Marylebone RoadLondon NW1 5QTPhone + 44 (0) 845 565 0236Fax + 44 (0) 207 117 1664E-mail info@optigreen.co.ukWeb www.optigreen.co.ukwww.optigreen.comHeadquarterOptigrün international AGAm Birkenstock 1972505 KrauchenwiesTelefon +49 (0) 7576 / 772-0Telefax +49 (0) 7576 / 772-299E-Mail info@optigruen.deWeb www.optigruen.deSKL GB 02/2013optigreen.co.uk | optigreen.com