DW Spectrum User Manual - publiclibrary.dwcc.tv

94 DW Spectrum User ManualTrigger Camera OutputIt is possible to generate output via two different methods:Output – generates output on Camera(s) while Event occurs and stops when Event ends.Camera output for 30 seconds – generates output on Camera(s) when Event occurs and stops output in30 seconds.Basic ParametersCamera(s) output is triggered on. To specify:1. Click on Select at least one camera in the desired row on the Alarm/Event Rules form. Thefollowing form will appear:2. Check the cameras to trigger output, then click OK (Cancel will discard changes).To select all Cameras on a specific Server, check the corresponding box. To filter search, use the Filterbox. Filter criteria is the same as search (see "Search"). It is possible to Drag'n'Drop the selectedCameras from Resource Tree onto the Action's advanced settings form.IMPORTANT. To trigger output signals, output must be supported on Camera. If the selectedCamera does not support output, then the corresponding message will be displayed (see above).Digital Watchdog