6. Carbon Steel Pipe & Fittings and Tube - Atlas Steels

More documents

Recommendations

Info

ATLAS STEELS – PRODUCT REFERENCE MANUALSECTION 6: CARBON STEEL PIPE, FITTINGS, FLANGES AND TUBECarbon Steel TubeHeat Exchangers, Hydraulic and Pneumatic Tube10S6Carbon steel tubing finds common application in two major areas; heat transferin heat exchangers and condensers, and as hydraulic and pneumatic tubing.This tube is produced as a seamless tube, with a final cold draw to guaranteedimensional tolerances and an excellent surface finish. In common with otherproduct this cold-drawn carbon steel tube is made to an all-plus tolerance ifintended for heat transfer applications, but is generally supplied with nominalwall thickness (+/- tolerance) for hydraulic or pneumatic applications.Stock range generally caters for applications in hydraulic and pneumatic tubing.The projects department offers sourcing for materials used in other applicationsaccording to customer specifications. These include heat exchanger tubes in standardmill lengths and/or specific set lengths.SpecificationsASTM A179M ‘Standard Specification for Seamless Cold-Drawn Low-CarbonSteel Heat-Exchanger and Condenser Tubes’ covers minimum wall thickness tube forheat transfer applications in sizes 3.18mm to 76.2mm OD.The specification for heat exchanger tube is also used to specify seamless carbon steeltube intended for hydraulic applications. This hydraulic tubing is manufactured withaverage wall thickness specified; in all other respects the product conforms to therequirements of ASTM A179M and ASTM A450M.Product intended for hydraulic applications has nominal wall thicknesses in the SWGseries of sizes, while the minimum wall thickness heat exchanger tube is generallyin line with the BWG series.In addition to the ASTM A179 tube stocked in heat exchanger and hydraulic variants,welded carbon steel tube can be obtained to either ASTM A178 or ASTM A214.Printed July 2010www.atlassteels.com.au
ATLAS STEELS – PRODUCT REFERENCE MANUALSECTION 6: CARBON STEEL PIPE, FITTINGS, FLANGES AND TUBEHydraulic and pneumatic carbon steel tubingTypical size range and tolerancemmNominalODinchesODpermissibledeviation(mm)Wall thickness (mm)0.90/0.91 1.20/1.22 1.60/1.63 2.00/2.03 2.64 3.25 4.06 4.88 6.40Gauge20 18 16 14 12 10 8 6 36.357.949.531/ 45/ 163/ 8+_ 0.10+_ 0.10+_ 0.1011S612.701/ 2+_ 0.1015.885/ 8+_ 0.1019.053/ 4+_ 0.1022.237/ 8+_ 0.1025.401+_ 0.1531.751 1 / 4+_ 0.1538.101 1 / 2+_ 0.1550.802+_ 0.20Stock length – 6.1 metres.Note: Gold zinc coating is available on request.Printed July 2010www.atlassteels.com.au
Page 1 and 2: Carbon Steel Pipe Fittings,Flanges
Page 3 and 4: Buttwelding Specification ASTM A234
Page 5 and 6: Carbon Steel Pipe • WeightsStruct
Page 7 and 8: Carbon Steel Buttwelding Fittings
Page 9 and 10: Class 600 Flanges to ASME B16.5Flan
Page 11: Carbon Steel Flanges • Dimensions

6. Carbon Steel Pipe & Fittings and Tube - Atlas Steels

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?