Fun Parts Xpress Catalog

GO GO KARTS KARTS 

BUMPER BOATS 

BATTING CAGE CAGE & & MINIATURE GOLF GOLF 

Parts & Accessories 

CATALOG 

Largest in-stock inventory of parts and accessories for 

go karts and bumper boats in the world.

Supplying parts and providing technical assistance to 

all go kart and bumper boat operators. 

Hi, I’m Dan Hansen, the general manager of Fun Parts Xpress. Fun Parts 

 

additional technical assistance to all go kart or bumper boat operators, 

 

Amusements, Fun Parts Xpress is the direct supplier for all the parts we 

 

 

 

W 

 

 

 

 

 

Largest in-stock inventory of parts and accessories for 

GO KARTS and BUMPER BOATS in the world. 

phone 

www.funpartsxpress.com 

fax parts@funpartsxpress.com

CONTENTS 

4” TIRES .........................................................................................................4 

5” TIRE/TUBE COMBINATION DEALS .........................................................4 

“A” RUBBER .................................................................................................26 

BATTERIES ...................................................................................................51 

BATTERY ACCESSORIES .............................................................................52 

BATTERY CHARGER ENCLOSURES ............................................................53 

BATTERY CHARGERS ..................................................................................53 

BATTERY MAINTENANCE ...........................................................................51 

BATTERY PLUG ENDS .................................................................................53 

BATTING CAGE BALLS ................................................................................62 

BEARINGS ....................................................................................................22 

BOAT CAPTAIN (MOTOR & SQUIRT CONTROL) ......................................37 

BODY LATCHES ...........................................................................................27 

BRAKE CALIPER PARTS...............................................................................16 

BRAKE CALIPERS .........................................................................................16 

BRAKE DISCS / HUBS .................................................................................15 

BRAKE LIGHT KITS ......................................................................................16 

BRAKE LINE FITTINGS ................................................................................19 

BRAKE LINES ...............................................................................................18 

BRAKE MASTER CYLINDER PARTS / REBUILD KITS ................................17 

BRAKE MASTER CYLINDERS .....................................................................17 

BRAKE PADS - HYDRAULIC ........................................................................15 

BRAKES - MECHANICAL .............................................................................15 

BRAKE TOOLS .............................................................................................14 

BRAKE TOOLS (POWER BLEEDER) ............................................................14 

BUSHINGS ...................................................................................................22 

CABLE CARE ................................................................................................56 

CABLE CARE ................................................................................................69 

CARBON CANISTER ....................................................................................25 

CHAIN DRIVE COMPONENTS ...................................................................23 

CHAIN DRIVE KITS ......................................................................................23 

CHOKE SETS ..................................................................................................9 

CLEANERS & PROTECTANTS .....................................................................67 

COG DRIVE KITS ..........................................................................................21 

COMMAND CONSOLE / TRAFFIC CONTROL ............................................34 

COMMON ENGINE PARTS .........................................................................11 

COMMON FITTINGS ...................................................................................13 

COOL-TEK ENDURANCE CLUTCH .............................................................10 

CORROSION PROTECTION ........................................................................66 

COUPLERS - FUEL LINES ............................................................................57 

DECALS - BUMPER BOAT - GENERAL .......................................................79 

DECALS - BUMPER BOAT -SAFETY & WARNING ......................................79 

DECALS - FOR EAGLE & F-22 WINGS ........................................................81 

DECALS - GO KART - SAFETY & WARNING ...............................................80 

DECALS - HOOD .........................................................................................81 

DECALS - NUMBERS, 7” ..............................................................................82 

DECALS - SIDE .............................................................................................81 

DISPLAY .......................................................................................................39 

DOCK RAILS ................................................................................................59 

DRIVE BELTS) ..............................................................................................20 

DRIVEN PULLEYS (ON AXLE) ......................................................................21 

DRIVE PULLEYS (ON MOTOR) ...................................................................21 

ELECTRIC GO KART COMPONENTS ..........................................................40 

ENGINE ACCESSORIES ...............................................................................12 

ENGINE LONG BLOCKS ...............................................................................8 

ENGINE MUFFLERS.......................................................................................9 

ENGINES - HONDA .......................................................................................8 

FUEL ACCESSORIES ....................................................................................57 

FUEL CAPS ...................................................................................................25 

FUSE & FUSE RELATED ...............................................................................52 

GAS CADDY .................................................................................................75 

GO KART FUEL TANKS ...............................................................................25 

GO KART TIE RODS .....................................................................................29 

GO KART TIMING HARDWARE ..................................................................39 

HAND GRIPS - BUMPER BOAT ..................................................................56 

HELI COIL KITS ............................................................................................69 

HELMETS & ACCESSORIES .........................................................................33 

HIGH TEMP SEALS ......................................................................................10 

HONDA 2:1 GO KART CLUTCH ..................................................................10 

HONDA ENGINE PARTS GUIDES .................................................................8 

HUB/BEARING TOOLS ...............................................................................22 

HUBS............................................................................................................22 

KARTROL CDI RED (GX 270 CDI ENGINES) ...............................................36 

KARTROL EXE (GAS & ELECTRIC GO KARTS) ............................................36 

KARTROL MICRO (FALCON GO KART) ......................................................37 

KARTROL PARTS .........................................................................................37 

KIDDIE TRACK - FALCON ONLY .................................................................47 

K&N LIFETIME FILTERS ...............................................................................24 

LEVERS - BUMPER BOAT ............................................................................56 

LUBRICANTS & OTHER ..............................................................................68 

LUG STUDS / NUTS & RELATED HARDWARE .............................................6 

MAINTENANCE & GROUND TOOLS .........................................................76 

MANUALS - OWNERS .................................................................................83 

MANUALS - PARTS GUIDES .......................................................................11 

MANUALS - PARTS GUIDES .......................................................................83 

MANUALS - SERVICE ..................................................................................83 

MANUALS - SHOP .......................................................................................83 

MINI GOLF ACCESSORIES ..........................................................................62 

MINI GOLF PUTTERS - PLASTIC .................................................................64 

MINI GOLF PUTTERS - RUBBER CLUB ......................................................63 

MINI GOLF PUTTERS - SATIN SHAFT/HEAD .............................................64 

MIRRORS .....................................................................................................27 

MISCELLANEOUS BUMPER BOAT ITEMS .................................................56 

MISCELLANEOUS CONSOLE RELATED ITEMS .........................................35 

OEM FILTERS ...............................................................................................24 

OIL CHANGING SUPPLIES .........................................................................74 

OIL DRAIN KITS ...........................................................................................13 

PADS - HEAVY-DUTY & STANDARD SEAT PADS ......................................32 

PADS - MISCELLANEOUS ...........................................................................32 

PAINT PROTECTION ...................................................................................30 

PASSENGER (FAUX) STEERING ..................................................................31 

PENNANTS ..................................................................................................41 

POND ACCESSORIES - INTERACTIVE POND SQUIRTER ..........................60 

POND CLEANING AGENTS ........................................................................61 

POND/POOL - INFLATABLES .....................................................................58 

PRE-FILTERS ................................................................................................24 

PROTECTIVE CLOTHING/GEAR .................................................................65 

RECOIL STARTER.........................................................................................12 

RELAYS .........................................................................................................52 

REPAIR KIT - SEAT PADS.............................................................................33 

RIDE TIMER - ANALOG ...............................................................................35 

RIM ACCESSORIES ........................................................................................7 

RIMS ...............................................................................................................7 

RIMS - SPECIAL ORDER ................................................................................7 

ROPE - BUMPER BOAT ...............................................................................59 

RPM/SPEED GAUGES .................................................................................27 

SEAT BELTS .................................................................................................28 

SHOP LIFT ACCESSORIES ...........................................................................71 

SHOP LIFT REPLACEMENT PARTS .............................................................71 

SHOP LIFTS .................................................................................................70 

SHOP TOOLS ...............................................................................................72 

SHOP TOOLS ...............................................................................................73 

SIGNS ...........................................................................................................77 

SLICK TRACK PRODUCTS ...........................................................................41 

SPARK PLUGS .............................................................................................11 

SPARK PLUGS .............................................................................................58 

STARTER ROPE/GRIPS ................................................................................58 

STEERING WHEELS .....................................................................................29 

THREAD LOCKERS & GLUES ......................................................................66 

THROTTLE CABLES .....................................................................................56 

THROTTLE ROD TO CABLE CONVERSIONS .............................................29 

TICKET PRINTER ..........................................................................................39 

TIMING SOFTWARE ....................................................................................39 

TIRES - BIGFOOT ...........................................................................................4 

TIRES - FALCON ...........................................................................................4 

TIRES - OTHER ...............................................................................................4 

TIRE TOOLS ...................................................................................................6 

TRACK CONTROL - SIGNS & FLAGS ..........................................................41 

TRACK HARDWARE .....................................................................................39 

TRAFFIC CONTROL LIGHTS .......................................................................35 

TRIM - BOAT HULL & MOTOR ...................................................................54 

TUBE REPAIR - BUMPER BOAT ..................................................................55 

TUBES - BUMPER BOAT, TEXTURED (SPECIAL ORDER) ..........................54 

TUBES - GO KART TIRE .................................................................................4 

TUBES - SUPER TUBE 2 ..............................................................................54 

TUBE TOOLS - BUMPER BOAT ..................................................................55 

VIDEO...........................................................................................................84

GO KARTS 

Buy tires in bulk and save! 20’ & 40’ containers available. 

We are the 

Go Kart 

Tire Store 

FPX is “The Tire Store” for concession 

go kart tires. We carry only the best and 

most popular sizes. 

TIRES - BIGFOOT 

5” TIRE/TUBE COMBINATION DEALS 

Part# Description Price 

007880COMBO Tire, 12 x 4.00 - 5” SL72 Bigfoot COMBO (W/Tube) $22.99 

007880 Tire, 12 x 4.00 - 5” SL72 Bigfoot (TIRE ONLY NO TUBE!) $21.99 

1-20-0037 Tire, 11 x 3.60 - 5” SL72 736HD $22.99 

Quantity discounts available on 007880COMBO. QTY 100+ $21.99, 500+ $20.99 

We stock so many tires we have another 

warehouse on the east coast! That’s 

right, we have a warehouse in Atlanta, 

Georgia and one at our headquarters in 

Salem, Oregon! 

4” TIRES 


1-20-0054 Tire, 4.10/3.50 - 4” SL72 738HD $15.80 

Salem 

TIRES - FALCON 

3 Days 

Tire/Tube Combo’s in 

to most U.S. cites 

Atlanta 


1-60-0185 Tire, 4.10/3.50-5 4-ply Falcon Electric King Nob Style $18.99 

1-20-0037 Tire, 11 x 3.60 - 5” SL72 736HD $22.99 

We ship tire/tube combos from both 

coasts! 

We know how important it is to keep 

your go karts on the track, so we 

opened an east coast warehouse in 

Atlanta to supplement our west coast 

warehouse in Salem, Oregon. 

TIRES - OTHER 


1-60-0009 Tire, 10 x 4.50 - 5” SL72 739 Race Style Slick $16.50 



The Atlanta warehouse ships tire/tube 

combination deals only. We do not 

carry a full line of parts or other tires at 

this warehouse. 

From these two shipping locations, we 

can ground ship tire/tube combination 

deals to almost every U.S. city within 3 

days. 

WE ALSO SHIP WORLDWIDE! 

TUBES - GO KART TIRE 


1-20-0038 Tube, 11 x 6.00 - 5 TR87 $4.99 

1-20-0045 Tube, 11 x 7.10 - 5 CS $9.50 

00780-M Tube, 3.40/3.00-5” (Bent Stem 45 degree Middle (BEST)(FPX) $3.80 

00778 Tube, 4.10/3.50-5” (Bent Stem)(FPX) $3.83 

00782 Tube, 4.10/3.50-6” (Bent Stem) $6.35 

1-20-0027 Tube, 15 x 6.00 - 6 (Used for 15 x 6.00 - 6 Tire) $4.99 

4 

Specifications and prices subject to change without notice. Download latest update to this catalog on-line.

GO KARTS 

CELEBRATING 20 YEARS 

1995 - 2015 

J&J’S BIGFOOT IS NOW 20 YEARS OLD! 

You as an operator and we as a go kart manufacturer demand the longest-wearing, best-value tire that money can buy. That’s why 

we designed and manufacture the Bigfoot from the ground up to be the best of the best. 

To continue to provide the best tire out there, we hired engineers to study our design and refine the manufacturing process. It is the 

longest-lasting go kart tire ever made; nothing will outlast the BIGFOOT. 

For our 20th anniversary, we are giving away 200 Bigfoot tire/tube combos at the 2015 IAAPA trade show in Orlando, Florida on 

November 16-20th, 2015. You will be automatically entered every time you order a box of 10 tires, so place your orders now and 

stock up! A representative from your company must stop by our booth to win. They may even catch a glimpse of a real, life-sized 

northwest Bigfoot! 

(Contest starts January 2, 2015 and drawing takes place at IAAPA on November 19, 2015) 

THE BIGFOOT TIRE FROM FPX. 

Thickest tread. 

Longest-lasting. 

Engineered for concession go karts. 

phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899 parts@funpartsxpress.com www.funpartsxpress.com 5

GO KARTS 

Use this specially made, 

thin-walled socket on go 

karts equipped with the 

Disc-lock safety wheel 

nut. 

This socket was designed 

with the clearance to 

fit between the nut and 

wheel hub. 

#1-60-A0311, 

Disc lock socket 

TIRE TOOLS 


3-20-A0008 Tool, Wheel Assembly 4 Lug J&J, Formula K, Johnson, AP $99.95 

3-20-A0009 Tool, Wheel Assembly 3 Lug Shaller Type $99.95 

3-96-A0001 Tool, Tire Bead Breaker HD J&J/Shaller $350.00 

3-96-0105 Tool, Tire Iron Set - 8”, 11”, 15” $36.95 

01345 Tool, Valve Core Remover $7.52 

01344 Gauge, Tire Pressure (0-50 psi - Karts Only) $12.66 

1-60-A0311 Tool, Socket 15mm 6pt (Machined) $14.99 

How does it work? See video online, scan QR code 

with your smartphone or simply vist our website at: 

http://www.jjamusements.com/videos/fpx-breadbreaker/ 

#3-96-A0001, Tire bead breaker 

tool for J&J and Shaller go karts. 

#3-20-A0008, Wheel assembly tool for 

J&J, Formula K, Johnson & Amusement 

Products go karts. 

#01345, Valve core removal 

#01344, pressure gauge 

#3-96-0105, tire iron set 

LUG STUDS / NUTS & RELATED HARDWARE 


0095120 Bolt, 5/16-18 x 3/4 Grade 5 Zinc plated $0.59 

1-50-0046 Stud, Front Hub Tapered Style 5/16-18 X 1-1/4 SSS Grade $0.64 

00998 Stud, Lug Press In Type 5/16 Fine 1 1/8” L $1.50 

#1-50-0189 

The Disc-lock safety wheel nut is a free 

spinning, vibration-proof wheel nut, 

specifically designed to prevent wheel 

loss from commercial vehicles such as 

trucks, trailers and buses with hubpiloted 

wheel systems. 

00970 Nut, 5/16-24 (Lug Nut) “Pre 98” $0.40 

009512 Bolt, 5/16-24 x 1 SHCS (Wheel Stud) $0.31 

009570 Bolt, 5/16-24 x 1-1/4 SHCS (Wheel Stud screw in type) $0.26 

00962 Washer, 5/16 Z Lock $0.15 

1-50-0189 Nut, 3/8-24 Z (Lug Nut) “Post 09” (DISC-LOCK) $1.15 

3824L Nut, 3/8-24 Z (Lug Nut) “Post 98” Pre-09 $0.32 

009513 Bolt, 3/8-24 x 1 SHCS (Wheel Stud for Front & Rear Hubs) $0.68 

009514 Bolt, 3/8-24 x 1 1/4 SHCS (Front & Rear Hub) $0.77 

1-50-0190 Bolt, 3/8-24 x 1-3/4 SHCS (Wheel Stud for Floater Hub 09-Up) $2.70 

#00970 #3824L 

6 


RIMS 


1-20-A0020 Rim Assy., 5” 4-Lug 3/8 Flat Style W/Bead Grip W/ Hardware $19.99 

F030F01-42705-1 Falcon, Front Rim Assy $30.44 

F030F01-42806-1 Falcon, Rear Rim Assy $24.68 

GO KARTS 

#1-20-A0020, New-style rims with bead lock and flat lug holes; 

Use Disc-lock style lug nuts. 

Fits most J&J, Formula K, Johnson & Amusement Products (Pacer) 

go karts. 

THIS STYLE RIM HAS BEEN DISCONTINUED. 

REPLACE WITH #1-20-A0020 & USE LUG 

NUTS #1-50-0189. 

Old-style rims with raised lug holes; 

Use taper style lug nuts. 

#F030F01-42705-1 

#F030F01-42806-1 

#007760, Filler 

valve. 

#0108, Valve 

stem cap 

RIM ACCESSORIES 


0108 Cap, Valve stem tires $0.11 

007760 Filler, Air Valve for Tubeless Tire System (Brass) $1.99 

PLEASE CALL FPX IF YOU HAVE ANY QUESTIONS ABOUT FITMENT. 

RIMS - SPECIAL ORDER 


1-60-0215 Rim Half, 2” x 5” Modular Rim Half Inner Alum (RE) 3-Lug $12.30 

1-60-0216 Rim Half, 2 1/2” x 5” Modular Rim Half Inner Alum (RE) 3-Lug $13.19 

1-60-0217 Rim Half, 4 1/2” x 5” Modular Rim Half Outer Alum (RE) 3-Lug $16.07 

1-60-0218 Rim Half, 2” x 5” Modular Rim Half Outer Alum (RE) 3-Lug $12.30 

1-60-0219 Rim Half, 2” x 6” Modular Rim Half Outer Alum (RE) 3-Lug $14.25 

1-60-0220 Rim Half, 2” x 6” Modular Rim Half Inner Alum (RE) 3-Lug $13.76 

1-60-0221 Rim Half, 2 1/2” x 5” Modular Rim Half Outer Alum (RE) 3-Lug $13.62 

1-20-0089 Rim Half, 5” 3/8 Lug-Bolt (W/ Valve Hole) Bead Grip $11.25 

1-20-0090 Rim Half, 5” 3/8 Lug-Bolt (W/O Valve Hole) Bead Grip $11.25 

#1-20-0089 #1-20-0090 #1-60-0219 #1-60-0220 #1-60-0221 


GO KARTS 

ENGINES - HONDA 


10950 Engine, GX160 5.5hp U1RH2 (STD) Honda $635.00 

010982 Engine, GX200 6.5hp URH2 (STD) Honda $675.00 

10971X Engine, GX270 9.0hp RT2 (RSC2) (CDI, W/Lamp-Coil, W/O Tank) $972.00 

The Honda GX Series OHV commercial-grade engine is designed for the most 

demanding commercial applications. It has set an industry standard for reliability and 

durability. Overhead valve design offers cooler, fuel-efficient operation and a cast iron 

cylinder sleeve provides longer service life. The GX is reliable, easy to start and is quiet 

running. Meets EPA and CARB emission levels standards. This legendary engine has 

earned the reputation as the preferred engine for concession go karts worldwide. 

J & J Amusements, Inc. designs and manufactures products for closed concession use only under trained supervision only. Any use of J & J 

Amusements products in a manner for which they were not intended may result in death or serious bodily injury. 

J & J AMUSEMENTS DISCLAIMS ALL RESPONSIBILITY FOR ANY DAMAGE TO ANY PERSON OR PROPERTY, INCLUDING DEATH OR SERIOUS BODILY 

INJURY, ARISING FROM YOUR UNAUTHORIZED AND UNINTENDED USE OF ITS PRODUCTS. 

ENGINE LONG BLOCKS 


1-61-0001LONG Longblock, GX160 Complete (See Notes) $459.00 



GX270 Long Block 

LONG BLOCK COMPLETE, ASSEMBLED 

Includes: 

Barrel, piston, rings, crank, rod, cover comp, governor kit, seals, crankcase 

Cover, camshaft, valves, valve cover, valve cover gasket, exhaust studs, rods, 

Breather tube, carburetor studs, spark plug & hardware. 

HONDA ENGINE PARTS GUIDES 


1-60-0060 Parts Guide, GX140, GX160 and GX200 (Free Download) $0.00 

1-60-0361 Parts Guide, GX270 UT2 (Free Download) $0.00 

Complete engine parts guides are available for download at www.funpartsxpress.com 

GX-270 UT2 

(RA2) Parts & 

Price Guide 

2014 

Written by the J&J Technical Team 

Kevin Be l, Dan Hansen, Eric Hahl. 

Manual Design & Layout 

Eric Hahl 

Models Covered: 

Honda GX-270 UT2 (RA2), GX-270 UT2 (QAE3) Electric Start 

Part No. 1-60-0361 

FunParts Xpress 

4897 Indian School Rd NE 

Suite 150 

Salem, OR 97305-1126 

Also from FunParts Xpress 

For parts description and pricing information see: 

FPX Go-Kart Parts & Price Guide - Vol. 1 

To l Free Phone: 1-800-854-3140 

Phone: 1-503-304-8899 

To l Free Fax: 1-800-366-7505 

Fax: 1-503-304-1899 

Updated 5-21-2014 

WE STOCK EVERY OEM HONDA© PART FOR ALL 

CURRENT GO KART ENGINES. 

GX160 5.5hp 

GX200 6.5hp 

GX240 8.0hp 

GX270 9.0hp. 

Visit our website for updated manuals (PDF Format) 

www.jjamusements.com and www.funpartsxpress.com 

© FunParts Xpress 2014 

8 


#1-61-0004 

#36787450 

ENGINE MUFFLERS 


1-61-0004 Muffler, GX160 Complete (See Notes) $30.00 

36787450 18310-ZE2-W00 Muffler Bare. GX240/270 Std.) $79.61 

1-61-0065 Muffler, GX200 Complete (See Notes) $30.00 

1-61-0076 Muffler, GX240 270 Complete STD Type UT2 TAKE OFF $99.00 

36787540 Stay, Muffler 8 - 9 HP Standard (Bracket) Gold $12.99 

36787530 Stay, Muffler 8 - 9 HP Silent (Bracket) Silver $12.99 

36787530KIT Stay, Kit 8 - 9 HP Muffler (Silent) includes hardware $13.99 

36787540KIT Stay, Kit 8 - 9 HP Muffler (Standard) includes hardware $13.99 

18320-Z5K-000 18320-Z5K-000 Protector Comp, Muffler GX240/270 Special $55.00 

18310-Z5K-000 18310-Z5K-000 Muffler Comp. GX270 UT2 Style $85.00 

GO KARTS 

#1-61-0005 

#1-61-0076 

#18310-Z5K-000 

#36787540 #36787530 

CHOKE SETS 


20900170METAL Choke Set, GX270 & GX240 Metal Type $29.95 

1-61-0011 Bracket, Choke Stop (GX240 & GX270) $3.59 

RAAP-404 Rivet, 1/8 x 1/4 Pop N Alum $0.12 

TIRED OF BROKEN PLASTIC CHOKE SETS? 

Replace the stock Honda plastic type choke sets with the FPX metal type choke set. 

Honda plastic type choke set 

Choke stop bracket prevents choke lever 

from inadvertently moving to “ON” position 

and fouling the spark plug. 

FPX metal type choke set 

#1-61-0011 


GO KARTS 

ENDURANCE CLUTCH UTCH 

PLATES 

COOL-TEK ENDURANCE CLUTCH 

PLATES, LAST LONGER AND COST 

LESS THAN OEM! 

Scan the QR code to see the video about the 

Cool-Tek endurance clutch or visit: 

http://www.jjamusements.com/videos/savemoney-kart-maintenance-cool-tek/ 

TM 

COOL-TEK ENDURANCE CLUTCH 


1-00-K0001CT Clutch Kit, GX/G240-270 CoolTek Complete $92.45 

1-00-K0002CT Clutch Kit, GX/G160-200 CoolTek Complete $87.95 

06360840HD Washer, Thrust 20mm (GX160 & GX200) $6.99 


06359380HD Center, Clutch (GX160 & GX200) $30.59 

07607360HD Center, Clutch (GX240 & GX270) $33.00 

06359610HD Sprocket Comp., Drive (GX160 & GX200) $50.99 

07607510HD Sprocket Comp. Drive (14T) (GX240 & GX270) $56.00 

03971250HD Shaft Comp., P.T.O. (28T) $70.35 

03970420CF Plate, Clutch Pressure Cool Tek $18.31 

43699550CF Plate, Clutch Friction Disc Cool Tek $18.31 

03970340HD2MM Plate, Clutch Metal HD 2.0mm Smooth Type STD $8.25 

03970590HD Spring, Clutch Free “FPX” $1.15 

10006 Seal, GX Output Sft High Heat Viton (Replmt for 00651360) $9.00 

10007 Seal, GX Reduc.Input Sft High Heat Viton 5-6.5HP (Rpl 063693 $9.99 

10008 Seal, GX Reduc.Input Sft High Heat Viton 8-9HP (Rpl 07564940 $9.60 

03970670 22421-822-610 Holder, Clutch Spring $1.41 

36838100 21591-ZH8-620 Packing, Reduction Case (GX160) $7.58 

43499650 21691-889-306 Gasket, Reduction Cover (GX240/270) $8.42 

36838360 21691-ZH8-800 Gasket, Reduction Cover (GX160/200) $9.95 

The greatest enemy of any clutch material is heat, with sludge and foreign material a 

close second. To combat these wear elements, FPX sought out the latest in high tech 

material and coupled this with a cooler-running, segmented design, resulting in a 

truly revolutionary product. 

FPX Clutch Disk 

#43699550CF, 

OEM Clutch Disk 

#43699550 

FPX Clutch Plate 

#03970340HD2MM, 

OEM Clutch Plate 

#03970340 

We have tested the plates under extreme conditions; full load under full stall with the 

oil drained from the clutch housing. This drove outside case temperatures in excess 

of 580 degrees F! Smoke pouring from all available orifices, the system still worked. 

After a short cool-down the kart drove away with clutch functioning normally. Check 

out the video on our website! 

FPX Clutch Pressure Plate 

#03970420CF, 

OEM Clutch Pressure Plate 

#03970420 

Under long-term testing, the clutch oil remained clean, showing only slight 

discoloration even after extended periods of use. Sludge buildup was minimal, which 

should result in more run time between changes. 

HONDA 2:1 GO KART CLUTCH 


1-61-0003 Clutch, GX140 160 200 Complete (See Notes) $400.00 

1-61-0009 Clutch, GX240 270 Complete (See Notes) $400.00 

HIGH TEMP SEALS 


10006 Seal, GX Output Sft High Heat Viton (Replmt for 00651360) $9.00 

10007 Seal, GX Reduc.Input Sft High Heat Viton 5-6.5HP (Rpl 063693 $9.60 

#10006 

10008 Seal, GX Reduc.Input Sft High Heat Viton 8-9HP (Rpl 07564940 $9.99 

10 


#14310480, 

Spark plug wrench 

#14411120, 

BPR6ES 

SPARK PLUGS 


00325 Spark Plug, BPR4ES (Hot Spark for GX Series Engines) $2.67 

16724430 Spark Plug, BPR5ES Hot 98079-55846 $3.53 

1-61-0038 Spark Plug, BR5HS (Robin 4hp - 9hp) Hot $4.08 

14411120 Spark Plug, BPR6ES 98079-56846 $3.26 

1-61-0037 Spark Plug, BR6HS (Robin 4hp - 9hp) STD $2.66 

14310480 89218-ZE1-000 Wrench, Spark Plug GX engines $12.00 

GO KARTS 

#06360840HD 

20MM Thrust washer 

#07612210HD 

25MM Thrust washer 

#03970670, OEM 

Clutch spring holder 

#03970590HD, FPX 

Clutch Spring 

#03970590, OEM 

Clutch spring 

#7352453, 

Oil seal 

#20260370, 

Throttle Return Spring 

COMMON ENGINE PARTS 


#1-61-0072, 

GX270 gasket kit. 

1-61-0072 Gasket Kit, GX270 FPX (Includes Clutch Gasket) $22.95 

43499650 21691-889-306 Gasket, Reduction Cover (GX240/270) $8.42 

20260370 16562-ZE2-000 Spring, Throttle Return $3.77 

7352453 91201-Z0T-801 Seal, Oil 25x41.25x6 $8.54 

03970590HD Spring, Clutch Free “FPX” $1.15 

03970670 22421-822-610 Holder, Clutch Spring $1.41 



Scan the QR code to open a link to the 

manuals on our website or visit our website at: 

http://www.jjamusements.com/service-andtechnical-information/ 

MANUALS - PARTS GUIDES 



1-60-0061 Parts Guide, GX240 & GX270 RA2 (Free Download) $0.00 

1-60-0361 Parts Guide, GX270 UT2 (Free Download) $0.00 

2-60-0028 Parts Guide, BF2A $0.00 

2-60-0029 Parts Guide, BF2D $0.00 


GO KARTS 

ENGINE ACCESSORIES 

#010732, hour meter. 

#010692, mounting bracket. 


hour meter or visit: 

http://www.jjamusements.com/videos/hourmeter-fpx/ 


01073 Meter, Tiny Tach (Hour & RPM) $49.00 

010732 Meter, Analog Hour Only J&J Logo $27.99 

010692 Bracket, Stop Switch & Meter Mount $11.22 

1-60-0206 Gauge, MPH Go-Kart (Vortex) 0-60 mph $179.00 

This small engine combination tachometer and hour meter works 

on go karts with 4 cycle gasoline engines and is a must for all 

power equipment to keep track of scheduled maintenance, oil 

changes, etc.. It’s the perfect service reminder for preventative 

maintenance. 

FUNCTIONS 

Hour meter - Records actual running of engine. Non-erasable. 

Tachometer - Shows engine RPMs (Reads up to 9,000 RPMs.) 

No battery required - works off of spark plug. 

OPERATION 

Fully automatic - Upon engine start, meter will show engine 

#01073 

RPMs; at engine shut-down, meter displays total accumulated 

#010732 

running time. 

THE VORTEX PRO 1200 KART SPEED GAUGE is a clean, 

simple, rugged instrument for measuring and setting kart 

speeds from a spinning rear wheel. Based on a Germanmade 

Sigma Sport BC1200 cycling computer, it accurately 

displays the current speed, with the ability to store maximum 

and average speeds, as well as other functions. 

The Vortex can be used on either side of the kart, at speeds 

up to approximately 60 mph (100 kph). The auto-on and 

power-save features ensure many months of use without 

changing the batteries. 

SOME OF THE FEATURES OF THE VORTEX PRO 1200 

KART SPEED GAUGE: 

Simple - The display will automatically “wake up” and 

show the current speed once the wheel is turning: no 

#1-60-0206, Vortex Pro 1200 speed gauge. 

on/off buttons to worry about. Checking the max speed, 

average speed, and other stored items is simple and easy: there is almost nothing to learn. 

Rugged - The Vortex is drop-proof and intended for use in a demanding environment. 

Accurate - The Vortex is accurate to within 0.5 mph (0.8 kph) from 2 to 60 mph (3 to 100 kph). 

Inexpensive - The Vortex is priced for maximum value: quality, hand-made parts and elegant design at a 

very attractive price. 


speed gauge or visit: 

http://www.jjamusements.com/videos/engineidle-speed-adjust/ 

RECOIL STARTER 


36788440T 28400-Z5K-003ZA Starter Assy Recoil 8 or 9hp $72.57 

7546781T 28400-ZH8-023YA Starter Assy. *R280* Use from SN 1937023(Tak $86.04 

Recoil starter assemblies 

52688180 Rope, Starter 200’ Roll #5.5(Go Karts Only) $26.27 

12 


OIL DRAIN/CHANGES MADE EASY. 

DrainZit oil drain kits save time and the eliminate the hassles associated with changing oil in your go kart engines. These oil 

drain kits replace the drain plugs on the motor case and clutch. Just use the quick connector to attach an oil extractor and/or oil 

dispenser and voila, your oil is changed and your investment is protected for another oil cycle. 

GO KARTS 

OIL DRAIN KITS 


#001012X 

#001010X 

Manual remote drain only 

1-60-A0082-R Oil Drain Kit, Engine & Clutch (160, 200) 10 & 12mm fittings $52.50 

1-60-A0083-R Oil Drain Kit, Engine & Clutch (240, 270) 12 & 12mm fittings $53.00 

001010X Drain, Engine Oil-Drain 10mm 6” with 1/8 NPT $18.99 

001012X Drain, Engine Oil-Drain 12mm 6” with 1/8 NPT $18.99 

001014 Drain, Engine Oil-DrainZit 14mm $15.11 

001010 Drain, Engine Oil-DrainZit (5.0, 5.5, 6.5 HP Engine Only) $18.99 

001012 Drain, Engine Oil-DrainZit (8.0, & 9.0 Only & Clutch ALL) $18.99 

1-60-0109 Drain, Engine Oil-DrainZit (13hp V-Twin 20mm) $17.52 

USE THE DRAIN OIL CHANGE 

KITS IN CONJUNCTION WITH 

OUR OIL EXTRACTOR, 

#1-60-A0141 AND OUR OIL 

DISPENSER, #1-60-A0140. SEE 

“OIL CHANGING” ON PAGE 74 

#3-50-0007 

#2-60-0114 

#1-60-A0141 

#1-60-A0140 

#3-50-0009 

#3-50-0010 

#1-50-0145 

#3-50-0004 

#10060 

#3-50-0005 

#3-50-0013 

COMMON FITTINGS 


2-60-0114 Fitting, Bushing 1/2”npt-1/8”npt female $5.99 

3-50-0009 Fitting, Oil 3/8” Barb 1/4”npt male $3.36 

3-50-0010 Fitting, Oil 3/8” Barb 1/4”npt Female $2.47 

1-50-0145 Fitting, Oil 3/8” Barb to 1/8”npt male $2.24 

3-50-0007 Fitting, Oil Hydraulic Female Steel $29.42 

3-50-0004 Fitting, Oil 1/4”npt to 1/8”npt Steel Adaptor $4.00 

10060 Fitting, 1/8” NPT Brass 1/4” Barb Straight $1.15 

3-50-0005 Fitting, Oil Hydraulic Male Steel 1/8”npt $10.94 

3-50-0013 Fitting, Oil 1/8”npt nipple (brass) $1.50 


GO KARTS 

BRAKE TOOLS (POWER BLEEDER) 


3-96-0032 Tool, Brake Bleeder Power (Includes 1 5/8 Male Cap) $84.99 

3-96-0034 Tool, Brake Bleeder Power Cap Assy Only 1 5/8” Male $43.99 

3-96-0036 Tool, Brake Bleeder Power Cap Only 45mm threaded round $30.25 

3-96-0035 Tool, Brake Bleeder Power Cap Only Wilwood Adapter Rectangle $43.25 

#3-96-0032 

3-96-0033 Tool, Brake Bleeder Power Catch Bottle $15.99 

WHY SHOULD I PRESSURE BLEED? 

The typical method of pumping the brake pedal while a helper opens and closes the bleeder valve can actually damage your 

master cylinder. By pushing the pedal past the normal travel distance, the master 

cylinder seals on the piston can be ripped or gouged by rusted or worn areas in the 

master cylinder bore. 

Pressure bleeding provides a safe and effective way to remove trapped air and other 

contaminants from the hydraulic brake system. Most manufactures recommend purging 

hydraulic brakes annually. The POWER BLEEDER is easy to pressurize and holds enough 

fluid for a complete system flush. 

HOW DOES THE POWER BLEEDER WORK? 

#3-96-0034 

The POWER BLEEDER works just like professional pressure bleeders. A tank containing 

hydraulic fluid is attached to the hydraulic system via a special adapter; the tank is 

then pressurized with a few pumps. When one of the bleed valves is opened, old or 

contaminated fluid is expelled as new fluid from the pressure tank is added. 

POWER BLEEDER FEATURES: 

Single person operation. 

Quick and clean, forward bleeding. It’s the same way we do it here at the factory. 

Male 1 5/8” adaptor cap included, fits FPX master cylinder. 

Optional catch bottle is available. Part# 3-96-0033 

Optional Wilwood rectangle adaptor. Part# 3-96-0035 

How does it work? See video online, scan QR code with 

your smartphone or vist our website at: 

http://www.jjamusements.com/videos/brake-bleeding/ 

#3-96-0033 

BRAKE TOOLS 


3-96-0010 Tool, Hydraulic Brake Bleeder One Man $17.84 

HYDRAULIC BRAKE BLEEDER 

#3-96-0010 

Makes bleeding your brakes a one-person job 

Billet aluminum body with internal check valve 

Will not bleed air from a dry system 

Instructions included 

14 


BRAKE DISCS / HUBS 


01043 Disc, Brake .190” x 7.50” Steel $39.25 

1-80-0053 Hub, Brake Disc/Drum-4 Bolt 1 1/4” $65.00 

GO KARTS 

THE FPX BRAKE HUB FITS GO KARTS EQUIPPED 

WITH 1-1/4” AXLES. 

#01043 & 

#1-80-0053 

Zinc coating to help protect it from the elements. 

3”x4 bolt circle fits many brake discs and drums. 

#1-80-0053 

#1-80-MC001, Fits 

FKL, Formula K 

and Kreative go 

karts. 

#010820A, J&J 

and Shaller go 

karts. 

BRAKE PADS - HYDRAULIC 


010820A Brake Pad, Black Square (FPX/Wil) Sold Each Pad $7.80 

1-80-MC001 Brake Pad, MCP (Fits 1375 1 3/8” Bore Black) Sold by Each $17.99 

BRAKES - MECHANICAL 


F030F01-43520-0 Falcon, Brake Drum Rear $37.00 

F030F01-43120-0 Falcon, Rear Brake Shoe Complete (inc. 2 springs & 2 shoes) $18.95 

1-80-A0018 Drum, Brake 4 Hole Fits Floater/Brake Hub $59.95 

02550 Brake Assy, 6” Internal Shoe(Backing plate, shoes-No Drum) $77.52 

1-80-0012 Brake Shoes, 6” Drum Stinger/Shaller (pair) $30.29 

#F030F01-43120-0, Brake shoe kit for Falcon 

& mechanical brake equipped go karts. 

08139 Drum, Brake 6” (Chromed-Internal shoe) $32.00 

# 1-80-0012, Fits first-generation J&J 

Stinger go karts & Shaller go karts. 

#F030F01-43520-0, Brake drum for Falcon 

go karts. 

#1-80-A0018, Brake drum for mechanicalbrake-equipped 

J&J go karts. 

WE CARRY BRAKE PARTS FOR MANY MANUFACTURER’S GO KARTS. 

Formula K 

FKL 

Kreative Karts 

Shaller Enjuneering 

# 08139, Fits first-generation J&J 

Stinger go karts & Shaller go karts. 


GO KARTS 

BRAKE CALIPERS 


1-80-0034 Caliper, Brake “Silver FPX” $75.00 

1-80-0071 Caliper, Brake MCP Self-Adjusting Caliper $115.00 

#1-80-0071 Used on Kreative, Formula k and FKL go karts 

#1-80-0034 

BRAKE CALIPER PARTS 


011130 O-Ring, Wilwood/FPX Caliper Piston $2.85 

010945 O-Ring, Seal Wilwood/FPX Caliper Halves $2.36 

010942 Clip, Brake Pad Retainer $2.86 

01112 Piston, Caliper Wilwood/FPX $16.08 

01114 Bleeder Valve, Enginetics/Wilwood $3.54 

#1-80-0071, used on Kreative, Formula K and 

FKL go karts. 

#01114 

#01112 

LED BRAKE LIGHTS 

#010942 

Adding the LED brake light kit to your go kart fleet can add a level of safety and style 

to the track. This easy-to-install kit includes everything you need to light up the night 

at your facility, drawing attention to the attraction. 

#010945 

#011130 

Kits are available for both gas and electric powered go karts. 

Adds a new level of safety to track. 

Draws attention to the track. 

Give us a call to discuss which LED 

brake light kit will work on your karts. 

BRAKE LIGHT KITS 


1-60-A0289 Brake Light, Kit DBL LED AC (Hardware,Wire,Connectors) $125.00 

1-60-A0292 Brake Light, Kit DBL LED DC E/KART (Hardware,Wire,Connectors $125.00 

1-60-A0298 Brake Light, Kit DBL/SGL Body Kart LED $150.00 

1-60-A0288 Brake Light, Kit SGL LED AC (Hardware,Wire,Connectors) $125.00 

1-60-A0290 Brake Light, Kit SGL LED DC E/KART(Hardware,Wire,Connectors) $125.00 

1-60-A0291 Brake Light, Kit SGL LED DC E/START Hardware,Wire,Connectors $125.00 

1-60-A0293 Brake Light, Kit SGL LED DC E/START(Hardware,Wire,Connectors $125.00 

16 


#010941T, FPX master cylinder 

BRAKE MASTER CYLINDERS 


010941T Master Cylinder, FPX 3/4” Bore (No fittings) $73.00 

1-80-A0100 Master Cylinder Assy, FPX 3/4” Bore W/Fitting (Stinger/Talon $74.95 

010941 Master Cylinder, Wilwood 3/4” (No fittings) $85.67 

01018 Master Cylinder, MCP/Enginetics (No Fittings) $70.99 

1-80-MC002 Master Cylinder, MCP 7/8” Bore $70.76 

01100 Master Cylinder, Wilwood Girling W/Cap & Fitting $73.97 

GO KARTS 

The FPX master cylinder is an all-steel unit designed for concession go kart use. It is 

used on all J&J hydraulic brake go karts and is a direct replacement for the Wilwood 

master cylinder. 

#010941, Wilwood master cylinder 

#01100 , Wilwood master 

cylinder 

(Girling-style) 

#1-80-0038 , FPX master cylinder 

rebuild kit, 

#01018 , MCP/Enginetics Master # 1-80-MC002 , MCP Master Cylinder 

Cylinder 

Used on Kreative, Formula K and FKL go karts 

BRAKE MASTER CYLINDER PARTS / REBUILD KITS 


1-80-0038 Rebuild Kit, M/C FPX 3/4” Bore $18.00 

1-80-0039 Cap, FPX Master Cylinder (Steel) Includes Diaphram $9.85 

01027 Seal, Master Cylinder Cup $1.12 

01026 O Ring, Master Cylinder Enginetics $0.48 

010851-A Rebuild Kit, M/C Wilwood Master Cylinder (Aluminum) $40.77 

01101 you Cap, Wilwood Girling Master Cylinder $12.34 

1-80-0030 Clip, Wilwood Master Cylinder (Aluminum) $9.75 

1-80-0031 Cap, Wilwood Master Cylinder (Aluminum) W/Gasket $26.91 

1-80-0032 Diaphram, Wilwood Master Cylinder Aluminum Type $9.99 

1-80-0047 Diaphram, Wilwood Girling Master Cylinder Cap $4.07 

01037 Rebuild Kit, M/C Enginetics $19.38 

1-80-0015 Rebuild Kit, M/C Wilwood Girling Style P/N 01100 $25.92 

1-80-MC151 Rebuild Kit, MCP875 Master Cylinder Rebuild (Buna) $17.99 

#1-80-0015 , Wilwood girling-style 

rebuild kit. 

#010851-A , Wilwood master 

cylinder rebuild kit. Cap and 

diaphram not included in 

rebuild kit. 

#01037 #1-80-MC151 


GO KARTS 

BRAKE LINES 


A11035 Brake Line, 04” #4 1/8 Pipe $8.90 

1-80-A0001 Brake Line, 09” #4 Straight x 1/8 Pipe $10.48 

7-201637 Brake Line, 10” #4 (Each End) MGP-201637 $10.27 

A01096 Brake Line, 104” #4 x 90 Deg. (TWD T-BOLT ) $51.57 

A010355 Brake Line, 105” #4x#4 SWD (T-Bolt, F-Series) $40.13 

A010961 Brake Line, 105” SGL (TWD) (F-Series) $49.44 

A11036 Brake Line, 11” #4 Straight x #4 Straight $12.52 

1-80-A0300 Brake Line, 16” with #4 Straight x 1/8” Pipe - FKL/CanAm $11.75 

1-80-A0002 Brake Line, 17” with #4 Straight x 1/8” Pipe (Spartan) $12.24 

01033 Brake Line, 18” #3 (Female Ends)92-94 Manifold to calipe $32.26 

A01395 Brake Line, 18” #4 $10.20 

A010330 Brake Line, 21” #4 $11.66 

01036 Brake Line, 24” #3 $18.54 

A01032 Brake Line, 24” #4 $10.95 

J&J CUSTOM LENGTH & PRE 

CUT BRAKE LINES FOR ANY 

APPLICATION. 

J&J carries a complete line of steel 

braided brake lines. Call us today to 

have us make your brake line. Just tell 

us how long you need it and which 

fittings to use and we can quote a 

price. 

Pick the fitting size and style from page 

19. 

A010320 Brake Line, 28” #4 $11.87 

A01107 Brake Line, 3-1/2” #4 X 1/8” Pipe $9.55 

1-80-A0302 Brake Line, 30” with #4 Straight x #4 Straight - FKL/CanAm $19.07 

1-80-A0301 Brake Line, 30” with #4 Straight x 1/8” Pipe - FKL/CanAm $19.07 

1-80-A0007 Brake Line, 39” with #4 Straight x #4 Straight (Spartan) $42.96 

1-80-A0008 Brake Line, 42” #4 (90 Degree) x #4 (90 Degree) $33.10 

1-80-A0003 Brake Line, 48” with #4 Straight x #4 Straight(Spartan) $21.28 

A01108 Brake Line, 5-1/2” #4 Ends $9.18 

1-80-A0009 Brake Line, 58” #4 (Straight) x #4 (Straight) $25.76 

1-15-A0115 Brake Line, 68” #4 (Straight)x #4 (90 deg.) SGL Electric $48.48 

1-80-A0010 Brake Line, 72” #4 (Straight) x #4 (Straight) Stinger/Talon $33.96 

A01091 Brake Line, 78” #4 (Straight)x #4 (90 deg.) SGL (SWD) $48.48 

A010921 Brake Line, 80” #4 (Single SWD)(Girling) $38.27 

A01092 Brake Line, 81” #4 W/two 90 Deg. SGL (TWD) $71.00 

1-80-A0006 Brake Line, 9 1/2” with #4 Straight x 1/8” Pipe (Spartan) $11.78 

A01034 Brake Line, 9” #4 $13.00 

A11034 Brake Line, 9” #4 end & 1/8” Pipe end $13.55 

A01093 Brake Line, 90” #4 x 90 Deg. DBL (SWD) $51.31 

1-80-A0013 Brake Line, 92” #4 (Straight) x #4 (90 deg.) Special Order $56.13 

A010931 Brake Line, 92” #4 W/Two 90 Deg. DBL (TWD) DBL Thunder (SWD) $56.13 

A01095 Brake Line, 94” #4 x 90 Deg. DBL Thunder (TWD) $63.64 

BRAKE LINES ARE NON-RETURNABLE. PLEASE MAKE SURE YOU SELECT THE CORRECT LINE FOR YOUR 

APPLICATION. GIVE US A CALL, WE’RE HAPPY TO HELP. 

18 


#010290 

#010291 

BRAKE LINE FITTINGS 


010290 Fitting, Male Branch - T (steel) $7.92 

010291 Fitting, #4 Straight 1/8 Pipe Brass $1.59 

01034 Fitting, Male Branch - Tee (Brass) $5.45 

01039 Fitting, Union Tee #4 $6.12 

010811 Fitting, 3/16” Barbed-Connector $1.46 

01085 Fitting, 1/8” npt x #4 jic 90deg. $4.00 

01086 Fitting, 1/4” Flair 1/8” Pipe $2.47 


01108 Fitting, 1/4 npt X 3/8 Barb Brass $1.68 

01396 Fitting, #3 Straight $7.40 

013960 Fitting, #3 To #4 (Used To Update From Girling) $16.95 


013989 Fitting, Brass Elbow 1/8 $2.83 

01399 Fitting, 1/8” Hex Head Pipe $1.02 

013999 Fitting, Brass Cross (Brake)(ThunderBolt) $7.58 

GO KARTS 

#01034 

#01039 

#01396 

#01399 

#013960 

#01085 

#01086 

#013999 

#01106 

#013989 


GO KARTS 

DRIVE BELTS) 


1-20-0034 Belt, Drive Pacer TR22336 Gates (Replaces Delco 15A0850 372E $26.62 

1-20-0053 Belt, Drive BX31 Tri Power (Used on Johnson Karts) $14.68 

1-20-0070 Belt, Drive BX32 Tri Power (Used on Pacer Karts) PM-2 $16.99 

1-20-0055 Belt, Drive BX34 Tri Power (Used on Johnson Karts) $14.44 

1-20-0056 Belt, Drive 8M-800-21 GT (Not J&J Production) $62.00 

1-20-0057 Belt, Drive 8M-720-41 PGT (Not J&J Production) $89.76 

1-20-0069 Belt, Drive 8M-640-36 FL Rubber $31.42 

Discontinued 

item; limited 

quantities 

available. 





1-20-0065 Belt, Drive 8M-720-50 Powergrip $49.47 

1-20-0072 Belt, Drive 8M-720-36 (SYNCHROCHAIN) $80.00 




1-20-0076 Belt, Drive 8M-720-36 GTC $90.51 

1-20-0113 Belt, Drive 8M-800-18 Giga Torque GX (new for 2014) $35.58 





7-201701 Belt, Drive V-Twin MGP Virage Kart $35.70 

7-6098GATES Belt, Drive 6098 1 3/16 x 40 3/8” (30mm x 1026mm) MGP-20 $34.09 

GATES’ NEW POLY CHAIN® GT® 

CARBON BELT. 

NOTHING TOUGHER. 

If you thought roller chain was your 

only drive option, think again. Gates’ 

new Poly Chain® GT® Carbon belt 

is part of a powerful synchronous belt 

drive system that outperforms roller 

chain in even the most demanding, 

high-torque applications. 

Gates’ Poly Chain® GT®2 belts have 

been replaced with Poly Chain GT 

Carbon belts. In most drives, they serve 

as a direct replacement. 

20 


Drive pulleys 

DRIVE PULLEYS (ON MOTOR) 


010123 Pulley, 17T-8m-36m 22mm Cog $42.64 

1-20-0108 Pulley, 17T-8m-36m 1” bore 1/4” key Cog (Special Order) $55.90 


0101232 Pulley, 19T-8m-36m 22mm Cog (Special Order) $62.65 




01011 Pulley, 23T-8m-36m 22mm Cog (Special Order) $75.85 



1-20-0035 Pulley, 25T-8m-36m 22mm Cog (Special Order) $82.43 

1-60-0015 Pulley, 27T-8m-36m 22mm Cog (Special Order) $89.00 

00869 Pulley, V-Belt (Engine 2.65) $70.00 

00870 Bushing, 22mm V-Belt Engine Pulley $82.50 

GO KARTS 

Driven pulleys 

#00870, V-belt 

pulley bushing. 

#00869, V-belt 

pulley. 

DRIVEN PULLEYS (ON AXLE) 


1-20-0021 Pulley, 65T 8m 40m Aluminum (Special Order) $68.39 

1-20-0041 Pulley, 70T 8m 40m Aluminum $80.00 

1-20-0040 Pulley, 75T 8m 40m Aluminum $77.00 

1-20-0042 Pulley, 76T 8m 40m 8 hole type Aluminum (RE Karts) Special O $74.57 

01014 Pulley, 80T 8m 40m Aluminum $79.61 

Cog assembly, 80Tooth, 

aluminum. Older style, tapered 

bushing type. 

010146 Pulley, 80T Steel 6 hole for 5-1/4” hub Gold Color $113.00 

1-20-0051 Pulley, 95T Aluminum (15G-95-40A1P) Special Order $121.00 

1-20-0031 Pulley, 100T Aluminum (15G-100-40A1P) Special Order $132.99 

COG DRIVE KITS 


1-20-K0001 Pulley Kit, Rebuild (22T, 80T & 800 FPX Drive Belt) $202.98 



FPX steel cogs & belts 


GO KARTS 

BUSHINGS 

#00870, V-belt 

pulley bushing. 

#010150, 1” 

bushing. 


00870 Bushing, 22mm V-Belt Engine Pulley $82.50 

010150 Bushing, Cog Axle Pulley 1” SH1 QD $35.00 

010151 Bushing, Cog Axle Pulley “SH” 1-1/4” $26.99 

00867 Bushing, V-Belt 1” SDS Axle $33.15 

008672 Bushing, V-Belt 1 1/4” SDS Axle $26.41 

#010154, 

Cog pulley hub. 

HUBS 


010154 Hub, Cog 1 1/4 (Clamp-on Style) $103.00 

1-80-A0014 Hub Assy., Rear 1-1/4”(+1/4” offset)(3/8” x 1-1/4” Studs) $66.20 

1-80-0053 Hub, Brake Disc/Drum-4 Bolt 1 1/4” $65.00 

01015 Hub, Cog (Bushing Style) $96.15 

A0105971 Hub Assy., Floater “Tight Race” 3/8” Studs W/Bearing No Disc $82.35 

#A0105971 

#1-80-A0014, 

Drive hub assembly. 

#01015, Cog hub, 

bushing style. 

#1-80-0053, Brake hub. 

BEARINGS 


1-20-0080 Bearing, Axle 1-1/4”(Sleeve-Lock Ring Style) Ductile Housing $39.00 

00883P Bearing, Axle 1” $99.00 

#1-20-0080, 

1-1/4” sleeve lock 

bearing. 

#00883P, 

1” axle bearing. 

HUB/BEARING TOOLS 


1-60-A1000 Tool, Hub Puller (5/16 or 3/8 Studs Rear or Front) $99.86 

3-96-0104 Tool, Bearing Sleeve Setter $36.99 

1-60-0193 Tool, Bearing Spanner Wrench (zinc) $16.83 

#1-60-A1000, 

Hub puller. 

#3-96-0104, Bearing 

sleeve setter. 

HUB PULLER 

Works on both 5/16” and 3/8” studs on both 

front and rear hubs with 4 and 3 lug holes! 

#1-60-0193, spanner 

wrench. 

22 


HD 520 X-RING CHAIN 

CHAIN DRIVE KITS 


1-20-K0004 Chain Drive Kit, 52 Link endless chain 11T Drive, 40T Driven $100.97 

1-20-K0005 Chain Drive Kit, 56 Link endless chain 11T Drive, 40T Drive $101.53 

1-20-K0006 Chain Drive Kit, 56 Link endless chain 12T Drive, 40T Drive $122.85 

GO KARTS 

FPX 520 drive system chain is the new 

choice for concession go karts, where a 

combination of long life, high strength, 

and excellent impact load resistance 

are very important. 

X-ring chain was designed in the 1980’s. 

Close up view of 520 X-ring chain 

Rubber rings have solved what was the 

chain-maker's biggest headache for 

many years: loss of lubricant. The loadbearing 

pins and bushings that enable 

a chain to bend over a sprocket have 

very little precious oil to keep them 

functioning properly. As if that wasn't 

enough, high centrifugal forces that 

occur when the chain turns around 

the drive sprocket throws away the 

oil. The only reason for chain wear is 

loss of lubricant. The advent of the 

X-ring chain enabled the chain to keep 

its oil inside and stay lubricated were 

it counts for long periods, which in 

return, extends chain life significantly. 

CHAIN DRIVE COMPONENTS 


1-20-0501 Sprocket, 520C 40T W/(6)1/4” bolt holes 5 1/4”BC (Lower) STD $75.42 

1-20-0508 Sprocket, 520C 45T W/(6)1/4” bolt holes 5 1/4”BC (Lower $76.54 

1-20-0509 Sprocket, 520C 50T W/(6)1/4” bolt holes 5 1/4”BC (Lower) $77.66 

1-20-0510 Sprocket, 520C 10T 22mm bore 7mm x 3.3mm (Engine) $52.55 

1-20-0500 Sprocket, 520C 11T 22mm bore 7mm x 3.3mm (Engine) STD $38.30 




1-20-0093 Chain Loop, 520 RK XSO-Ring (52 links) Endless - Rivet $40.00 



1-20-0505 Chain, Lube Super Clean $14.03 

3-60-0079 Lubricant, Chain Lube W/ White Graphite $5.68 

CHAIN DRIVE ADVANTAGES 

520 X-ring chain are designed for 1000cc (100hp motorcycles). 

High impact resistance. 

Operates in hostile environments (typical go kart tracks). 

No slippage. 

Less stress on clutch and axle bearings. In contrast to belt drive karts that need to 

be tensioned very tightly, chain drive karts run little freeplay, which improves the 

life of both the drive system bearings and clutch. 

Negligible stretch, allowing chains to carry heavy loads. 

1 year warranty against chain breakage. 

MAINTENANCE - SEALED RING CHAINS 

There are only three things you need to do to regularly maintain a modern sealedring 

chain: 

Clean it of debris (sand, dirt, grime). 

Lubricate the exterior (oil or wax), O-ring type lube only. 

Adjust it for elongation (not too tight!). 

NEED HELP WITH PICKING THE CORRECT DRIVE RATIO? USE THE RATIO CALCULATOR ON OUR WEBSITE AT: 

http://.jjamusements.com/technical/speedcheck.htm 


GO KARTS 

K&N LIFETIME FILTERS 


SP-2748 Filter, Air GX240, 270 K&N $39.98 

SP-2747 Filter, Air GX160, 200 K&N $39.98 

99-5000C Filter, K&N Oil/Cleaner Kit $16.00 

99-0516C Filter, K&N Filtercharger Oil 12oz Aerosol $10.44 

1-60-0084 Filter, K&N Filtercharger Oil (5 gal) $127.00 

1-60-0083 Filter, K&N Filtercharger Oil (1 gal) $36.90 

1-60-0086 Filter, K&N Filtercharger Cleaner (5 gal) $141.07 

1-60-0085 Filter, K&N Filtercharger Cleaner (1 gal) $37.55 

99-0621C Filter, K&N Cleaner 32oz Squirt Bottle $14.65 

7-E-3402 Filter, Air Round K&N Air Filter (Universal) 18hp Briggs $51.42 

K&N’s filter recharger kit is a six-step 

maintenance system designed to 

recharge your K&N Filtercharger® 

air filter. Completely restores air flow 

efficiency so your Filtercharger® 

performs like new. 

Never needs replacement. 

1 million mile warranty! 

Scan this code with your smartphone to see our video of the K&N 

filters or just type in this link: 

http://www.jjamusements.com/videos/kn-air-filters-go-karts/ 

OEM FILTERS 


7372444 17210-ZE1-517 Element Air Cleaner Filter (Dual) GX140/200 $16.16 

7460967 17210-ZE2-515 Element, Air Cleaner (W/Pre Filter) GX240/270 $12.65 

PRE-FILTERS 


1-60-0100 Filter, Prefilter 5 - 9 hp (Water Repellent)(Outerwears) $11.99 

The need for a pre-filter is apparent every time you take on the elements of your 

favorite sport. Whether that sport is racing on dirt or asphalt, or just plain cruisin' in 

your bitchin' street rod, your air filter takes a beating! OUTERWEARS PRE-FILTERS are 

just the answer! 

OUTERWEARS are designed to keep the bigger particles of sand, dirt, clay and street 

debris from getting to, and clogging, the pleats of air filter elements. OUTERWEARS 

How does it work? See video 

online, scan QR code with unique polyester material contains uniform micron openings. These openings allow 

your smartphone or visit our air in, yet filter out the very elements that will eventually clog an air filter, keeping 

website at: 

http://www.jjamusements. engines running smooth and clean! 

com/videos/pre-filter-fpx/ 

Extensive dyno & flow bench testing has shown no critical loss in horsepower or air 

intake using OUTERWEARS PRE-FILTERS, JUST GREAT PROTECTION!! OUTERWEARS PRE-FILTERS are used and recommended 

by professional engine builders and race teams worldwide, and will help prevent needless engine wear and tear, which will be 

obvious upon engine analysis during rebuilding. 

24 


#0108011B-CARB 

2.2 gallon fuel tank 

#010802B-CARB, 


See “couplers - fuel lines” on page 57 for Quick disconnect couplers. 

GO KART FUEL TANKS 


0108011B-CARB Tank, Fuel Bare 2.2 Gal. “Black” CARB Compliant $159.00 

1-60-0001MOD Tank, Fuel Bare 3.0 Gal. “Clear” Spartan (modified 08/01/00) $106.59 



010803B-CARB Tank, Fuel Bare 4.75 Gal. “Black””CARB” (Wide Chassis & 8,9h $185.00 

1-60-0001WEBBER Tank, Fuel Bare Webber Aprox 3 gal. $118.32 

001772-G Filter, Fuel 60 Micron Stainless Steel, PET Ho $3.50 

H-173 Hose, Fuel Line 3/16” (sold by the inch) Low Perm. EPA Compl $0.20 

H-174 Hose, Fuel Line 5/16” (sold by the inch) Low Perm. EPA Compl $0.25 

32002 Hose, Fuel Line 3/8” (Inside diameter- Fits #001107) $1.07 

91424-Z5K-003 91424-Z5K-003 Tube, Fuel (4.5 x 210) $14.99 

32001 Hose, Fuel Line 1/4” (sold by the inch) Low Perm. EPA Compl $0.15 

T-452015008 Clamp, Fuel Line Spring (1/4”) Black $0.31 

1-50-0001 Clamp, Fuel Line Spring (3/8”) Olive Drab $0.22 

18000029-67Q Clamp, Fuel Line Spring (5/16”) $0.25 

1288 Clamp, Fuel Line Spring (3/16”) $0.22 

GO KARTS 

#001772-G #T-452015008 #1-50-0001 #18000029-67Q #1288 

#10804B-CARB, 


FUEL CAPS 


1-60-0177 Cap, Fuel Kelch Ratchet No Vent w/ Tether (CARB) $13.29 

1-60-A0180 Cap, FPX Anti-Spill Tip Over Cap $17.10 

1-60-A0181 Cap, FPX Anti-Spill W/ Jaz Product Tip Over Vent $50.14 

010822 Cap, Kelch (Non Vent) $7.09 

#010803B-CARB, 


Webber 3 gallon 

replacement fuel tank. 

Limited supplies. 

#1-60-0177, 

Ratcheting fuel cap. 

#1-60-A0180, Anti 

spill fuel cap. 

#1-60-A0181, Tip 

over vent fuel cap. 

#010822, Non 

vented fuel cap. 

CARBON CANISTER 


#1-61-0062 

1-61-0062 Canister, Carbon $25.00 


GO KARTS 

THE MOST DURABLE, LONGEST- 

LASTING BUMPER SUPPORT 

AVAILABLE; THAT FIT MOST TYPES OF 

GO KARTS. 

Special formulation gives these rubber 

bumper strips extra long life and 

resistance to cracking. Can easily be cut 

to any length to suit your needs. 

Thousands of uses. 

Rubber sections can be cut to any 

size. 

Pre-cut and drilled, more natural 

rubber compound to resist 

breaking. 

The unique “A” design with rounded 

edges helps prevent cracking and 

splitting. 

The “A” shape ensures rubber-tobumper 

contact. 

“A” RUBBER 


1-70-0043 Rubber, “A” 4” x 4” x 1-5/8” (Cut/Drilled)(Formula K) $5.50 

00833 Rubber, “A” 4” x 4” x 3” (Cut/Drilled) $8.99 

00834 Rubber, “A” 4” x 4” x 4” (Cut/Drilled) $11.30 

008331 Rubber, “A” 4” x 4” x 60” (Log) $2.99 

008332 Rubber, “A” 6” x 6” x 60” (Log) (Used mostly on track rails) $150.00 

008555 Rubber, “D” 3” x 3” x 60” (Log) $1.28 

008556 Rubber, 2”x2” (Sold by inch, Max 60”) $1.25 

008577 Rubber, “U” Channel (Stocked 60” Log) $60.48 

0083310 Rubber, “A” 4” x 4” x 3-1/2” (Cut/NOT Drilled) $11.99 

A00831 Rubber, “A” 4” x 4” x 2-1/2” (Cut/NOT Drilled) $7.47 

#008577 

Sold as 60” log 

#1-70-0043, fits 

Formula K go karts 

#008556 

#008331 


#008555 


#00833 

26 


MIRRORS 


10005 Mirror, Side View L/R (Acrylic Lens Type) $7.29 

GO KARTS 

#10005 

BODY LATCHES 


1-40-0145 Latch, Body - Flexible (Latch Only) (Heavy Duty) $10.18 

#1-40-0145 

002679T Latch, Body - Flexible W/Keeper Bracket (Heavy Duty) $27.00 

#1726, Ametek 

MPH gauge. 

#002679T, 

Latch assembly 

#01099, Wireless 

rpm gauge. 

USE THE WIRELESS RPM GAUGE TO SET ENGINE IDLE SPEED AND MAXIMUM 

RPM OF GO KARTS OR BUMPER BOATS. 

RPM/SPEED GAUGES 


1-60-0206 Gauge, MPH Go-Kart (Vortex) 0-60 mph $179.00 

01099 Gauge, RPM Wireless $101.00 

1726 Gauge, MPH Go-Kart (Ametek) $475.00 

01073 Meter, Tiny Tach (Hour & RPM) $49.00 

SETTING GO KART SPEED HAS NEVER BEEN EASIER! 

THE VORTEX PRO 1200 KART SPEED GAUGE is a clean, simple, rugged instrument for measuring and setting kart speeds 

from a spinning rear wheel. Based on a German-made Sigma Sport BC1200 cycling computer, it accurately displays the current 

speed, with the ability to store maximum and average speeds, as well as other functions. 

The Vortex can be used on either side of the kart, at speeds up to approximately 60 mph (100 kph). The auto-on and powersave 

features ensure many months of use without changing the batteries. 

SOME OF THE FEATURES OF THE VORTEX PRO 1200 KART SPEED GAUGE: 

Simple - The display will automatically “wake up” and show the current speed once the wheel is turning: no on/off buttons to 

worry about. Checking the max speed, average speed, and other stored items is simple and easy: there is almost nothing 

to learn. 

Rugged - The Vortex is drop-proof and intended for use in a demanding environment. 

Accurate - The Vortex is accurate to within 0.5 mph 

(0.8 kph) from 2 to 60 mph (3 to 100 kph). 

Inexpensive - The Vortex is priced for maximum value: 

quality, hand-made parts and elegant design at a 

very attractive price. 

How does it work? See video 

online, scan QR code with your 

smartphone or simply visit our 

website at: 

http://www.jjamusements.com/ 

videos/engine-idle-speed-adjust/ 


GO KARTS 

WE CARRY SEAT BELTS FOR J&J, KREATIVE, FORMULA K, VIRAGE GO KARTS AND MORE. 

SEAT BELTS 


01077 Seatbelt, 4-Point Orange Tab $84.15 

21043 Seatbelt, 4 Point Stinger (Blue/White Tabs) $95.00 

010778 Seatbelt, 4-Point Maroon Tab Sidewinder,Sidekick II,Scorp II $90.15 

1-60-0254 Seatbelt, Formula K F 5001 (Flip, Green/Blue Tabs) $64.26 

7-201531 Seatbelt, MGP Virage (single seater) $96.90 

7-201614 Seatbelt, MGP Grand Virage (two seater) $99.99 

1-50-0066 Seatbelt, D-Ring $1.63 

010771 Seatbelt Extension, 12” (Flip Buckle) $49.99 

11077R Pad, Seatbelt Shoulder 15” (Pair)(Rubber) $25.50 

110779R Pad, Seatbelt Shoulder 19”(Pair) (Orange Tab)(Rubber) $29.99 

110777 Pad, Seatbelt Shoulder 23” (Pair) $29.00 

110778 Pad, Seatbelt Shoulder 7 1/2” (Special) (pair) $19.75 

1-60-0062 Seatbelt, 4 Point Orange Tab (Push Button Release) SPECI $89.76 

1-60-0069C Seatbelt Extension, 12”(Push Button Style Canada & Kreative) $45.00 

010779 Seatbelt, SGL Sidewinder/DBL Sidewinder (Paramount) $105.00 

1/2” hole 

#110779R. 

Rubber shoulder pad 

NEW HEAVY-DUTY SEAT BELT 

SHOULDER PADS. Say good-bye to 

those stinky, cracked vinyl pads. These 

new molded rubber pads will not absorb 

moisture. This feature keeps the pads 

from absorbing perspiration and will 

outlast any other pads. 

Length of strap 

approximately 23.5”(59.6cm) 

#1-60-0069C 

12” seat belt extension, push 

button style. 

Length of strap 

approximately 21”(53.3cm) 

#010771 

12” seat belt extension, 

Flip style. 

Unless otherwise stated, no items sold by J&J Amusements Inc. or Fun Parts Xpress meet current EPA or DOT requirements and are intended for 

off-road use only. Any other use is at the purchaser’s own risk and holds J&J Amusements Inc. harmless of any legal actions taken by such use. 

28 


#A00863, 

Butterfly style. 

#1-10-0103, 

Falcon & 

Passenger 

steering wheel. 

STEERING WHEELS 


A00863 Steering Wheel Assy, Butterfly W/Pad and Bolts $79.80 

00863 Steering Wheel Assy, Round 10” W/Pad (Current) $44.83 

1-10-0103 Steering Wheel, Falcon/Passenger Steering $40.00 

01098 Steering Wheel, Round 10” (Current) $40.00 

00863 Steering Wheel, Butterfly $56.99 

1-10-0102 Steering Wheel, Butterfly 2 (Softer Grip Style) $18.00 

GO KARTS 

#A01098, Round 

style. 

Heavy-duty, tube-style 

tie rods & rod ends 

GO KART TIE RODS 


A00589 Tie Rod, Assy 11” Shaft Style L/R Male Threads $44.83 

A00591 Tie Rod, Assy 21” Shaft Style L/R Male Threads $50.95 

1-10-A0099 Tie Rod, Assy HD 11” Tube Style L/R Female Threads $65.00 

1-10-A0100 Tie Rod, Assy HD 21” Tube Style L/R Female Threads $65.00 

1-10-0083 Rod End, 3/8” Male Stud x 3/8” Male Stud (Right Hand Thread) $11.17 

1-10-0084 Rod End, 3/8” Male Stud x 3/8” Male Stud (Left Hand Thread) $16.00 

Replace all this... 

...with this. 

THROTTLE ROD TO CABLE CONVERSIONS 


1-30-A0001 Throttle Cable Assy, Conversion Rod to Cable (8/9 SGL/DBl) $65.93 

1-30-A0002 Throttle Cable Assy, Conversion Rod to Cable (5/6 SGL/DB) $61.71 

1-15-0113 Cable, Throttle 40.75” Electric Talon $26.95 

1-15-0091 Cable, Throttle 64.25” Electric Eagle Dbl/Sgl $31.48 

21020 Cable, Throttle 64.75” Grey (Sting, Spartan & Post 2000) $34.80 

1-30-0016 Cable, Throttle 73” Black Housing $32.00 

1-30-0002 Cable, Throttle 98” Black Housing (Pre 2000 F16 & Roadwarror $42.08 

7-201402 Cable, Throttle MGP Virage $29.62 

WE ARE CONSTANTLY IMPROVING OUR GO KARTS. 

Take advantage of the latest improvements to the throttle linkage. Upgrade the old, rodstyle 

& lever linkage to the simple cable system. 

Easy to maintain. 


GO KARTS 

PAINT PROTECTION 


1-60-A0128 Panels, Diamond Plate “Bright Package” (Double) $100.93 

1-60-A0127 Panels, Diamond Plate “Bright Package” (Single) $89.71 

1-60-A0130 Panels, Diamond Plate “Bright Package” (Talon) $89.71 

1-60-A0308 Panel, Eagle Chip Protection Upgrade Kit $125.00 

1-60-0356 Panel, Eagle Chip Protector Left Side $62.00 

1-60-0357 Panel, Eagle Chip Protector Right Side $62.00 

#1-60-0356 

#1-60-0357 

#1-60-A0128 

#1-60-0356 

Rugged stainless steel chip protection. 

Aluminum diamond plate bright work adds 

protection from scrapes and scuff cause by 

shoes & looks great. 

#1-60-0357 

30 


PASSENGER (FAUX) STEERING 


1-10-A0013 Steering Assy., Passenger Side Steering Wheel(w/pad) $167.18 

GO KARTS 

Child patrons sometimes feel left out when they are not old enough to drive. Sure, 

they have fun riding along in a two-seat go kart, but we have just made their ride a 

whole lot more fun with “passenger-side steering”. Obviously, it doesn’t actually steer 

the kart, but the little kids will love it! 

Easily mount bracket to chassis with 4 bolts. 

Two quick-release pins removes assembly for larger riders. 

Gives miles of smiles for the smallest patrons. 


GO KARTS 

Roll bar pad 

PADS - HEAVY-DUTY & STANDARD SEAT PADS 

Seat back pad 

Seat pad 


008600A Pad, Single (Seat) Formed $82.00 

008580A Pad, Single (Back) Formed (Bolt On) $90.00 

008560A Pad, Single (Rollbar) Formed (Bolt On) $58.00 

1-90-0013 Pad, Single (Seat) Formed Heavy Duty $100.98 

1-90-0006 Pad, Single (Back) Formed (Bolt On) Heavy Duty $109.00 

1-90-0008 Pad, Single (Rollbar) Formed (Bolt On) Heavy Duty $84.00 

1-90-0014 Pad, Single (Back) Formed (Glue On) Heavy Duty $103.02 

008590A Pad, Double (Back) Formed (Bolt On) $110.00 

008570A Pad, Double (Rollbar) Formed (Bolt On) $100.00 

1-90-0009 Pad, Double (Seat) Formed Heavy Duty $170.77 

1-90-0005 Pad, Double (Back) Formed (Bolt On) Heavy Duty $126.67 

1-90-0007 Pad, Double (Rollbar) Formed (Bolt On) Heavy Duty $107.98 

PADS - MISCELLANEOUS 


00848 Pad, Single Back (Stinger,F-16,Scorpion II,Formula K) $71.66 

1-90-0016 Pad, Eagle Side Panel Right $67.32 

1-90-0017 Pad, Eagle Side Panel Left $67.32 

1-90-0019 Pad, Stinger (Headrest) Formed $68.21 

008642 Pad, Steering Column (Formed) 3/4” Steering Column $25.00 

008572 Pad, Fender Well (Right) $30.60 

008573 Pad, Fender Well (Left) $30.60 

#1-90-0019 

#1-90-0016 

00864A Pad, Steering Wheel (Butterfly) Formed $26.47 

1-90-0020 Pad, Steering Wheel (Butterfly) Formed (Soft Type) $41.78 

00862A Pad, Steering Wheel (Round) Formed $21.32 

1-10-0104 Pad, Steering Wheel Passenger Steering/Falcon $12.95 

11077R Pad, Seatbelt Shoulder 15” (Pair)(Rubber) $25.50 

F030F12-773200 Falcon, Pad Steering Wheel (Button Strap Style 1st Gen) $39.27 

008572 Pad, Fender Well (Right) $30.60 

008573 Pad, Fender Well (Left) $30.60 

#1-90-0017, Eagle side panel 

pad. 

#00864A, Butterfly 

steering wheel pad. 

#00862A, Round 


#11077R, Rubber 

shoulder harness pad. 

#1-10-0104, Falcon 


#008642, steering 

column pad. 

32 


REPAIR KIT - SEAT PADS 


1-60-0071 Patch, Rapid (For Seat Pads)(Maxim Fast Urethane) $71.00 

GO KARTS 

#1-60-0071 

URETHANE REPAIR KIT FOR GO KART SEAT PADS 

Prolong the life of your go kart pads! 

Do you have rips and tears in your seat pads? 

Would you like to fix them in 15 easy minutes? 

Now you can with Rapid Patch! 

It’s the easy, inexpensive way to fix rips and tears before they ruin your pads. 

HELMETS & ACCESSORIES 


1-60-0332 Tie, Hair Elastic 50ct $7.99 

1-60-H0008 Helmet, GM2X Black Adult L $56.99 

1-60-H0007 Helmet, GM2X Black Adult M $56.99 

1-60-H0010 Helmet, GM2X Black Youth L/XL $56.99 

1-60-H0009 Helmet, GM2X Black Youth S-M $56.99 

1-60-H0003 Helmet, GM2X Blue Youth L/XL $56.99 

1-60-H0002 Helmet, GM2X Blue Youth S/M $56.99 

1-60-H0006 Helmet, GM2X RED Adult M $56.99 

1-60-H0012 Helmet, GM2X White Adult L $56.99 

1-60-H0011 Helmet, GM2X White Adult M $56.99 

1-60-H0013 Helmet, GM2X White Adult XL $56.99 

1-60-H0005 Helmet, GM2X Wine Red Youth L/XL $56.99 

1-60-H0004 Helmet, GM2X Wine Red Youth S/M $56.99 

1-60-0288 Decal, Warning Hair/Rotating Parts 3.75” x 5.0” $4.25 

IMPORTANT SAFETY DECAL to be displayed on all 

go karts in such a manner as to allow easy readability 

for every rider. #1-60-0288 

GMax GM2X open face helmet 

DOT approved lightweight, injection-molded poly 

carbonate shell. 

Clear-coated, painted shell. 

Deluxe ear pockets for better fit and comfort. 

Deluxe rubber edge molding. 

Deluxe mesh crown pad. 

Padded chin strap. 

Dual liner for added comfort with soft brushed 

nylon against skin and vents to help reduce 

moisture. 

Adjustable forehead vent. 

3-snap bubble visor. 

#1-60-0332, Hair ties 


GO KARTS 

WHAT IS THE COMMAND CONSOLE? 

The Command Console is a state-of-the-art timing & 

message-delivery system with integrated kartrol housing 

that allows your attendants to maximize your returns while 

making the ride safe. 

WHAT DOES THE COMMAND CONSOLE DO? 

The Command Console allows your attendant to operate 

and control the ride from one central location. The console 

is an event-timing system that controls ride time and up to 

5 *traffic lights. Has audio & video playback capability** for 

your pit area message, includes a PA amp with a hand-held 

microphone, and features an integrated Kartrol enclosure. 

Console shown with optional Kartrol EXE 

transmitter installed. Sold separately. 

Your track attendant starts each session by pressing the 

green “go” button. The traffic-control circuit changes the 

traffic lights to green and accurately times the ride to a 

preset time. 

If you need to slow the ride, the attendant simply presses the yellow button. The traffic lights* go to yellow. Kartrol*** 

equipped consoles also benefit from a second set of buttons that allow the attendant to control the go karts. Pressing the 

yellow button on these consoles slows the go karts to “crawl” speed, and pressing the red button allows for a complete stop of 

the ride. 

When the ride is coming to an end, the system sends a signal to the traffic lights* to flash the yellow lights, and it emits an 

audible tone at the speakers** to alert the attendants and riders to prepare for the end of ride. After a few moments, the 

traffic lights will flash red until the next session is started. 

If no ride is started for a designated time, the console goes into “sleep mode”, and shuts down the traffic lights to save energy. 

During the pre-ride, the console can play an audio or video** safety briefing for your customers. This message can be set to 

toggle or loop constantly. The console comes equipped with a generic audio message and with a professionally produced 

safety video: just hook up a few video monitors. 

THE COMMAND CONSOLE IS MADE TO BE OUTDOORS YEAR-ROUND WITH ITS HEAVY DUTY ENCLOSURE. 

System requirements: 

120v 20 amp circuit (dedicated) for console and traffic lights. 

* Traffic lights sold separately 

** Speakers sold separately, video 

monitors not included. 

***Kartrol is an optional accessory that 

can be integrated into the console for 

protection and centralized control of the 

ride. 

COMMAND CONSOLE / TRAFFIC CONTROL 


1-60-5005 Console, Traffic Light Control W/AV Messenger, PA, EXE $4,500.00 

1-60-5002 Console, Traffic Light Control W/AV Messenger, PA $4,100.00 

1-60-5006 Console, Traffic Light Control $1,599.00 

1-60-5000 Console, Ride Timer W/ Strobe Toplight, PA, Message $2,299.00 

1-60-5001 Console, Kartrol EXE Enclosure W/Remote Buttons $999.00 

1-60-5009 Console, Traffic Light Control W/EXE No AMP $3,599.00 

1-60-5008 Console, Message Video/Audio Only, Bogen AMP, PA Ready $3,599.00 

34 


TRAFFIC CONTROL LIGHTS 


A01342 Light Assy, Traffic-120VAC 60Hz (Light, Cap, Mount, Visor) $385.97 

013434 Light, Traffic 8x8x8 (W/Out Visors) $280.50 

013391 Lens, 8” Traffic Light Red (Poly) $37.03 

013391G Lens, 8” Traffic Light Red (Glass) $36.72 

013392 Lens, 8” Traffic Light Yellow (Poly) $37.03 

013392G Lens, 8” Traffic Light Yellow (Glass) $36.72 

013393 Lens, 8” Traffic Light Green (Poly) $37.03 

013393G Lens, 8” Traffic Light Green (Glass) $36.72 

1-60-0186 Lens, 8” Traffic Light Yellow W/ Arrow (Glass) $44.88 

013446 Top Cap, Light $12.34 

01346 Visor, 8” Traffic Light (Aluminum) $43.76 

013445 Mount, Tri-Stud Light 1 3/4 Pipe $91.79 

013416 Bulb, Traffic Light (67 Watt 120volt) Long Lasting $4.94 

GO KARTS 

#01346 , 

Traffic light visor, 

#013416 

#013446 #013445 

Traffic light, 8” shown 

without visors. 

MISCELLANEOUS CONSOLE RELATED ITEMS 


CC312T Speaker, Reflex Horn (12Watt) $82.00 

1-60-5004 Microphone, Hand Held Heavy Duty (FPX Consoles) $215.00 

CC141 Light, Electra Flash 120 Vac. (Rotating Red) $285.99 

CCKL1 Console, Key (Any Style) $8.16 

Light, electra flash 

#CC141ST 

Heavy-duty microphone , 

#1-60-5004 

Speaker, #CC312T 

Console key, 

#CCKL1 

RIDE TIMER - ANALOG 


01328 Clock, Timer (White) 60 minute $303.61 

3-60-0088 Clock, Timer (White) 15 minute $303.61 

BASIC RIDE TIMER CLOCK 

Simple and effective. 

Light and buzzer combination to alert attendant when ride time is over 

Requires 110v AC outlet. 


GO KARTS 

KARTROL CDI RED (GX 270 CDI ENGINES) 


Kartrol CDI RED, Kart Control 

Receiver Bare(CDI Gas) 

1-60-9800 Kartrol CDI RED, Kart Control Receiver Bare(CDI Gas) $445.00 

1-60-9801 Kartrol CDI RED, Wire Harness Gas W/73” Pit $108.99 

1-60-9802 Kartrol CDI RED, Wire Harness Gas (No Pit) $65.00 

1-60-9803 Kartrol CDI RED, Programmer/Shop Tester $410.00 

#1-60-9801 

#1-60-9026, Kartrol EXE, kart control 

receiver, bare (gas Or elec. no pit) 

#1-60-9802 

#1-60-9049 

#1-60-9043 

(Hardwire Remote 

Mount Switch, place 

in key areas of the 

track for complete 

control) 1-60-9043 

Kartrol is a solid-state, electronic engine speed limiter used on go kart motors to 

reduce the engine RPM by remote control. This gives the track operator more control 

over the track operation, enabling him to reduce the speed of an individual kart, a 

group of karts, or all the karts at will. 

As an optional part of the system, a device can be mounted near the pit entrance that, 

when activated, will reduce RPM of every kart that passes by it, without affecting karts 

elsewhere on the track. This greatly improves safety in the pit area. 

KARTROL EXE (GAS & ELECTRIC GO KARTS) 


1-60-9005 Kartrol EXE, Console Table Top (Wireless) $1,360.99 

1-60-9004 Kartrol EXE, Console Hand Held (Wireless) $1,360.99 

1-60-9010 Kartrol EXE, Pocket Transmitter Track #1 $441.99 


#1-60-9803 

#1-60-9006 

#1-60-9030 #1-60-9004 

#1-60-9005 #1-60-9017 


1-60-9003 Kartrol EXE, Pit Control Generator (Gas) $772.99 

1-60-9003-E Kartrol EXE, Pit Control Generator (Electric) $772.99 

1-60-9026 Kartrol EXE, Kart Control Receiver Bare(Gas Or Elec. No Pit) $426.99 

1-60-9012 Kartrol EXE, Wire Harness Gas (No Pit) $36.75 

1-60-9045-SENSR Kartrol EXE, Wire Harness Gas (W/ Pit) 73” $89.00 

1-60-9027 Kartrol EXE, Wire Harness Electric (No Pit) $36.75 

1-60-9028 Kartrol EXE, Kart Control Receiver Electric Bare W/ Pit $463.99 

1-60-9029 Kartrol EXE, Wire Harness Electric W/73" Pit $86.99 

1-60-9006 Kartrol EXE Yellow, Programmer/Shop Tester $410.00 

1-60-9043 Kartrol EXE, Remote Switch Box (4 Button) needs 8 pin cable- $180.00 

1-60-9009 Kartrol EXE, Remote Switch Box (6 button)-needs 8 pin cable- $205.99 

1-60-9017 Kartrol EXE, Hip Transmitter $435.00 

1-60-9018 Kartrol EXE, Hip Receiver $525.00 

1-60-9049 Kartrol, EXE Micro Transmitter Wall Mount (Track 1) $699.00 

1-60-8008 Kartrol Micro, Receiver (Falcon/EBB Code 2) $320.00 

1-60-8007 Kartrol Micro, Transmitter (Falcon/EBB Code 2) $410.00 

36 


KARTROL MICRO (FALCON GO KART) 


1-60-8000 Kartrol Micro, Receiver (Falcon & Boat Captain EBB) $308.00 

1-60-8001 Kartrol Micro, Transmitter (Falcon) $410.00 

GO KARTS 

BOAT CAPTAIN (MOTOR & SQUIRT CONTROL) 

#1-60-8000 


1-60-8000 Kartrol Micro, Receiver (Falcon & Boat Captain EBB) $308.00 

1-60-8003 Kartrol Micro, Transmitter (Boat Captain EBB) $410.00 

1-60-8004 Kartrol Micro, Transmitter Wall Mount (Boat Captain EBB) $699.00 

#1-60-8001, Kartrol 

micro receiver. 

#1-60-9003 

#1-60-8004 

KARTROL PARTS 

#1-60-9011 

#1-60-9035 

#1-60-9016 

#1-60-9015 


1-60-9011 Kartrol EXE, 8 Pin Remote Switch Cable $44.88 

1-60-9016 Kartrol EXE, Antenna BNC type (table top console EXE) $44.88 

1-60-9035 Kartrol EXE, Antenna Extension 24” For Tabletop CC Enclosure $36.99 

1-60-9019 Kartrol EXE, Antenna Extension 25’ W/ Mounting Plate $85.00 

1-60-9015 Kartrol EXE, Antenna screw on type (hand held console EXE) $44.88 

1-60-9025 Kartrol EXE, Batteries AA rechargeable NiMH $5.61 

1-60-9032 Kartrol EXE, Battery Holder (Table Top) $30.60 

1-60-9033 Kartrol EXE, Pit Control Sensor For Elec Kart 73” (Optional) $45.90 

1-60-9007 Kartrol EXE, Pit Control Sensor For Gas Kart (Optional) $45.99 

1-60-8002 Kartrol Micro, Antenna Micro or Pocket transmitter 2” length $22.39 

1-60-8006 Kartrol Micro, Antenna Wall Mount (Boat Captain EBB) $31.37 

1-60-9013 Kartrol EXE, Transformer 120VAC60Hz 9VAC C1A Adapter Console $30.60 

1-60-9014 Kartrol EXE, Transformer 12VAC 20 VA W/LED Pit Generator $44.88 

#1-60-9032 

#1-60-8006 

#1-60-9007, Kartrol, pit 

control sensor. 

#1-60-9025 

#1-60-9013, Kartrol 

transformer. 

#1-60-9014, Kartrol 

transformer. 


GO KARTS 

TRACK DESIGNS 

One of the strongest attractions for a family entertainment center is its go kart track. There are a variety of concession go kart 

track concepts that serve specific needs for individual track facilities. They vary in size, concept and target markets. For larger 

facilities a combination of multiple track types can result in higher annual revenues and help generate more repeat visits. 

Our “In-house” designer can help you get the most out of your go kart track design. We provide conceptual drawings your local 

engineer can use to finalize the design. Just provide us with a property drawing and an idea of how big you want to go and we’ll 

do the rest. For best results, please provide drawings in AutoCAD format. 

38 


DISPLAY 


1-00-0100 Display, Digit (88 88.888) RED 58” H x 63.2” L x 9” D 6-Line $9,600.00 

1-60-3000 Display, Main Board DSUB-M0078 DPCB-M0101 AMD $434.78 

1-60-3001 Display, Power Supply S-150-7.5UL $336.60 

1-60-3003 Display, Surge Protector RS-232 RJ-11 $89.76 

1-60-3004 Display, Main Board DSUB-M0076 AMB V0.2 $478.26 

1-00-0101-OP Converter RS 232/485 W/Built In data surge protector $245.00 

GO KARTS 

GO KART TIMING HARDWARE 


1-60-0093TX140 Timing, Transponder AMB140 TX (One Per Kart) $437.99 

1-60-0093BRACKT Bracket, Timing Transponder (J&J Karts)/Axle Guard $16.07 

1-60-0093CLAMP Timing, Clamps Hose Transponder (pack of ten) $19.07 

ADVERTISING, REDEMPTION, AND 

PROMOTIONS ARE ALL PART OF 

GENERATING REVENUE. 

TIMING SOFTWARE 


The XPRESSTRACK System provides these 

1-60-0094 

and more in one simple-to-set-up system. 

1-60-0094KEY 

Timing, Software Xpress Track Pit W/Scoreboard 

Timing, Software Key Only (no software) 

$4,500.00 

$504.90 

Vision is one of the most important 

senses we have. They say a picture is 

worth a thousand words... How much is 

motion worth? 

1-60-0094TV 

Part# 

Timing, Software Xpress TV Score 

TRACK HARDWARE 

Description 

$504.90 

Price 

Generate revenue from outside sales on 1-60-0092 Timing, Active Detection Loop 12m/39ft Track,20m/65ft Coax $1,100.00 

an active matrix display. What would you 

1-60-0117 Timing, Light Controller (Hardware for Xpress Track) $408.00 

pay to advertise your business on the 

1-60-0189 Timing, Coax Extension 100m 75ohm W/ BNC Connectors $714.00 

radio or TV? Sell time on your display to 


local businesses and the system will pay 


for itself in no time. 

1-60-0090TX140 Timing, Decoder (1 L) TransX140 SL, RS232 Cable, Headphone $5,457.00 

One of the most important aspects of 

a system of this kind is its ease of use 

and maintenance-free operation. The 

XPRESSTRACK System utilizes top-ofthe-line 

components to ensure long, 

maintenance-free life. Our timing system 

transponders and decoders are the 

same units used in world-class racing 

venues from Formula-1 to NASCAR and 

everything in between. 

1-60-0090POWER 

1-60-0090POWER2 

1-60-0090POWER3 

1-60-0090POWER4 

Part# 

1-60-0108 

Timing, Power Adapter 110V (US) for decoder 12V Pre-2004 

Timing, Power Adapter 110V (US) decoder 12V Post-2004 LED 

Timing, Power Adapter 110V (US) Activator 20m Type Black Pls 

Timing, Power Adapter 110V (US) Activator 100m Type 

TICKET PRINTER 

Description 

Printer, Mini MB Boca (Specify Interface) USB, Parallel 

$89.76 

$119.00 

$95.00 

$95.00 

Price 

$2,999.00 

THE TRANSPONDERS ARE VIRTUALLY MAINTENANCE-FREE AND FEATURE A NEW, “NO-RECHARGE” BATTERY, GOOD 

FOR A MINIMUM OF HALF A MILLION LAPS! 


GO KARTS 

ELECTRIC GO KART COMPONENTS 


1-63-0001 Plug, SBX175 Housing and Terminals (Green) $50.00 

1-15-0001 Relay, 48V Continuous Duty Bear DC Contacter(W/ Hardware) $89.99 

#1-63-0001, 

SBX175 

1-15-0009 Sevcon, Controller D&D Motor (Millipak SEM REG,HP,48V,450A) $630.00 

1-15-0011 Sevcon, Throttle Controller (Linear Accelerator) $195.23 

1-60-A0238 Charger, Battery Zivan NG-6 48-80-440V Three phase W/SBX175 $1,902.00 

1-60-A0321 Charger, Battery Zivan NG-7 48-80-220V Three phase W/SBX175 $2,215.00 

1-60-A0302 Charger, Battery Zivan NG-5 48-80-220V Single phase W/SBX175 $1,902.00 

#1-15-0001, Relay. #1-15-0097, floor 

charging brush. 

1-15-0069 Sevcon, Controller D&D (Formula K) 5-Post 48 volt 600 amp $699.00 

1-15-0158F Switch, Position 3 mm Dia. Shaft 5kO ±20% Formula K $64.00 

1-15-0097 Charging, Floor Brush (Stainless Wire) $27.00 

These common components can be found on most manufacturers electric-powered go 

karts, including those manufactured by J&J Amusements. 

SEPARATELY EXCITED MOTOR CONTROLLER (SEM) 

Speed, efficiency, flexibility. SEM offers a contact-free solution 

to regenerative braking and field weakening, with improved 

efficiency. Complementary switching techniques provide 

improved speed control without added sensors. 

#1-15-0009, Go kart 

controller. 

#1-15-0011 

#1-15-0158F, 

Formula K throttle switch 

Brushed, permanent-magnet motor controller 

The pmac controller operates in trapezoidal or sinusoidal 

wave-form switching modes. 

Enhanced reliability and performance 

Sevcon’s patented mosfet switching design delivers peak 

dependability and performance, 

Silent operation utilizing a 16 khz high switching frequency. 

Flash memory for increased flexibility 

Digital and analog inputs 

#1-15-0069, 

Formula K controller 

ZIVAN BATTERY CHARGERS FEATURE STATE-OF-THE-ART HIGH FREQUENCY 

TECHNOLOGY. 

Adaptable to every use and very flexible. 

#1-60-A0238, Zivan battery 

charger. 

CE certified. 

Metal case base and ABS cover. 

Conformal coated printed circuit boards. 

ZIVAN chargers are all microprocessor-controlled and internally protected against 

overload, short circuit, incorrect connection and voltage transients. 

With an internal selector switch, the chargers can adapt to every type of battery. 

Increased battery life and reduction of water usage. 

ZIVAN chargers operate at 85-90% efficiency for maximum savings of electric power 

cost. 

With the thermal sensor option, the charger’s output electronically compensates for 

temperatures ranging from 0° to 50°. 

Operating temperature from -20° to +50°. 

Weight and size are minimized. 

40 


SLICK TRACK PRODUCTS 


01348 Wax, Under Coat RH1 5 Gal $117.30 

GO KARTS 

01349 The stuff Wax, that City Seal makes RH2 the 5 Gal Slick Track Slick! 

$130.00 

USE RH1 TO SEAL THE CONCRETE SURFACE. THEN USE RH2 FOR THE DAY-TO-DAY 

BASE WAX. 

#800, 24” 

checkered flag. 

#807 

#809 

#812 

TRACK CONTROL - SIGNS & FLAGS 


1-60-0114 Sign, Stop and Slow Paddle 18” Plastic $99.99 

800 Flag, Checkered 24” x 24” w/36” Dowel $78.99 



803 Flag, Checkered 2’ x 3’ $76.52 

804 Flag, Checkered 3’ x 5’ $85.90 

This is a handy, double-sided 

paddle sign for your track 

attendant. #1-60-0114 

806 Flag, Yellow 24” x 24” w/36” dowel $29.17 

807 Flag, Black 24” x 24” w/36” dowel $35.70 

808 Flag, Red 24” x 24” w/36” Dowel $33.99 

809 Flag, Green 24” x 24” w/36” Dowel $33.99 

810 Flag, White 24” x 24” w/36” Dowel $33.99 

811 Flag, Blue w/Yellow Diagonal 24” x 24” W/36” Dowel $19.07 

#3-60-0013 

812 Flag, Starter Set 24” x 24” W/36” Dowel (Set Of 7) $199.00 

PENNANTS 


3-60-0013 Pennant, US Flags String 12” x 18” x 60’ Square $29.62 

#805 

3-60-0014 Pennant, American Pennant Strings 12” x 18” x 25’ $12.34 

805 Pennant, Checkered String 12” x 18” x 25’ 4-mil $13.58 

813 Pennant, Multi-Colored String 12” x 18” x 25’ 4-mil $13.58 

#813 

PENNANTS 

Enhance your park with a racing image! These flags come in an assortment of different 

styles to suit your needs. 

Nylon-printed checkered flag finished with canvas heading and brass grommets. 

These stiff, muslin flags come mounted on their own dowels. Sizes include 4”x4” and 12”x18”. 


GO KARTS 

GO KARTS 

1 

MODELS 

EAGLE 

 

 

Simple, rugged, and easy to maintain, the Eagle is the safest 

open-body kart in the industry. All moving parts are covered 

and guarded to reduce the risk of exposure, while staying very 

easy for the guest to get into the kart and ready for their race. 

The open design gives the guest the feeling they are going 

much faster with its open sight lines to the ground. 

Maintenance can be easily performed without having to 

remove the body or panels, keeping this kart going day after 

day in the some of the busiest parks in the world. With a 

simple design and stylish accents, it’s easy to see why the 

Eagle is our most popular model. 

2 

DOUBLE EAGLE 

 

 

The matching double seat version to our popular Eagle single 

seat model, Double Eagles allow the passenger the most 

room of any of our two-seat models, making it very easy 

for the guest to get into the kart and ready for their race. 

They are also the safest open-body kart in the industry, as 

all moving parts are covered and guarded to reduce the risk 

of exposure and injury. The open design gives the guest the 

feeling that they are going much faster, with open sight lines 

to the ground. Maintenance can be easily performed without 

having to remove the body or panels, keeping this kart going 

day after day in the some of the busiest parks in the world. 

With a simple design and stylish accents, it’s easy to see 

why the Eagle and Double Eagle karts are our most popular 

models. 

Jr. 

 

 

 

TALON (ROOKIE) 

Simple, rugged, and easy to maintain… just like its big 

brother the Eagle! The Talon go kart is built for the kids 

that fall between kiddie karts and adult go karts, with every 

component proving just as tough as their adult go kart 

counterpart. 

42 


1 

F-22 

Taking cues from our most popular go kart models (the 

Eagle and the Scorpion) the F-22 has it all: low body lines 

to enhance the feeling of speed for the guest, but enough 

body surface to add exciting graphics or advertising. The 

F-22 allows maintenance to be performed without having to 

remove the body to save you time, and all moving parts are 

covered and guarded to reduce the risk of exposure. It’s easy 

to get into and out of to increase rider turnover and thus, 

revenue. The stylish body even looks fast while it is sitting still! 

GO KARTS 

 

 

 

 

2 

F-22 DOUBLE 

Taking cues from our most popular go kart models (the Eagle 

and the Scorpion), the F-22 Double features a low-profile 

body with open-style leg areas for ease of entry and exit. The 

sleek F-22 body has plenty of room for graphics and sponsor 

decals. Another great feature of the F-22s is the ability to do 

most maintenance procedures with the body in place; this 

feature will save your mechanic a significant amount of time 

over the years. 

phone: 1-800-854-3140 | 1-503-304-8899 304 fax: 1-800-366-7505 0-36 

6-75 

05 | 1-503-304-1899 -304 

-189 

parts@funpartsxpress.com www.funpartsxpress.com 

43

GO KARTS 

GO KARTS 

1 

2 

 

 

 

 

MODELS 

SCORPION 

A stylish, single-seat go kart with room for big riders. All 

moving parts are covered and guarded to reduce the driver’s 

exposure. The body features curvaceous styling with flair 

reminiscent of some Corvette models, while still maintaining 

plenty of space for selling advertising on the stylish body. 

Your guests will have no problem getting in and out of the 

spacious cockpit and that’s music to our ears: the quicker you 

can load and unload between sessions, the more profits you 

generate! 

KING SCORPION 

It’s natural progression that brings the two-seat King Scorpion 

into existence. The wide open driver/passenger area offers 

the best of all combinations between safety and accessibility. 

All moving parts are covered and guarded to reduce the 

driver’s and rider’s exposure. The body features curvaceous 

styling with flair reminiscent of some Corvette models, while 

still leaving plenty of space for selling advertising on the 

stylish body. Your guests will have no problem getting in and 

out of the spacious cockpit and that’s music to our ears: the 

quicker you can load and unload between sessions, the more 

profits you generate! 

Jr. 

 

 

 

STINGER (ROOKIE) 

Here’s the go kart for drivers that don’t quite fit into the 

full-sized karts: it’s designed to fill a void for your family of 

racers. We started with our renowned steel chassis and just 

made some simple design changes…like taking 10 inches out 

of the middle. This shortened-up go kart is perfect for those 

riders down to 4′ tall. Easy-to-reach control pedals with oversized 

surfaces make it easy for the little racers to drive like a 

champ! 

Picture shown with optional steel bumpers. 

44 


1 

 

 

SIDEWINDER 

With lots of room for sponsor decals, this stylish single-seat 

GO KARTS 

design looks the most car-like of all the designs we offer. This 

closed cockpit kart turns heads as it turns laps. All moving 

parts are securely covered, and the safety does not stop 

there: 4-point seat belts, a padded steering wheel and colorcoded 

pedals are just a few of the features loaded into this 

versatile kart. Your guests will love the style, and you’ll love 

the safety and durability. 

2 

SIDEWINDER DOUBLE 

 

 

With lots of room for sponsor decals, this stylish, double-seat 

design looks the most car-like of all the designs we offer. This 

closed cockpit kart turns heads as it turns laps. All moving 

parts are securely covered, and the safety does not stop 

there: 4-point seat belts, a padded steering wheel and colorcoded 

pedals are just a few of the features loaded into this 

versatile kart. Your guests will love the style, and you’ll love 

the safety and durability. 

Jr. 

FALCON (KIDDIE) 

Keep the family at your park longer by making the younger 

guests happy. The Falcon kiddie kart is designed to do just 

that. Suitable for guests aged 5 years and older, they can 

run 8+ hours on a single charge. The steel frame is designed 

to last years, with many safety features such as 3-point seat 

belts, a steering wheel pad and a UHMW bumper to prevent 

tire-to-tire contact during rides. A built-in 110/220v charger 

makes overnight charging a breeze and makes this kart able 

to be used worldwide. Easy-to-use hand controls make the 

Falcon kart adaptable for both smaller and larger drivers. Add 

a fleet of Falcon karts and the smiles will follow! 


GO KARTS 

1 

CAN-AM 

The J&J Can-Am single-seat go kart is the go kart that started 

it all! The Can-Am go kart provided the foundation for 

all karts that have followed in J&J’s record-setting lineup. 

J&J’s requirements for the Can-Am were that it be easy to 

maintain, safe, clean and fun to drive. The Can-Am met these 

requirements and went beyond! All moving parts are covered 

and guarded to reduce the risk of exposure. The stylish Can- 

Am single seat body has the most room of all our single seat 

models for advertising decals. 

 

 

 

 

2 

SIDEKICK 

The J&J Sidekick has it all, including the largest cockpit in the 

industry! The Sidekick two-seat go kart has revitalized the 

go kart industry. All moving parts are covered and guarded 

to reduce the risk of exposure. The stylish Sidekick two-seat 

body also has the most exterior room for advertising decals 

of all our two seat models. 

DESIGN 

When J&J Amusements set out to build the best concession 

kart in the world, we knew that good was not good 

enough. We knew it had to be able to withstand heavy daily 

use in the busiest parks, be the safest on the market, and be 

the easiest to maintain in order to minimize down time. We 

have done just that. Because of our forward thinking, we now 

have karts in facilities ranging from small fun centers to large 

theme parks all over the US and the world, putting smiles on 

the faces of customers and owners alike. 

your go karts “on track” by building them tough and safe, all 

the while ensuring easy-to-perform routine maintenance. 

You are in this business to make money. Let J&J go karts keep 

your go kart tracks profitable. 

EXPERIENCE 

Put J&J’s experience to work for you. Our long history in this 

business puts us in a unique position to guide you into a 

profitable venture and help you avoid some of the pitfalls 

associated with the industry. 

QUALITY 

At J&J, we know what building go karts is all about. 

The bottom line is to design and build a go kart that can stand 

up to the rigors of everyday concession/rental use and keep 

your patrons coming back for more. Our main goal is to keep 

46 


KIDDIE TRACK - FALCON ONLY 


KDZTRACK Track, Inflatable Falcon Track $2,700.00 

9-60-0012 Generator, GX200-196cc (2,966 rated watts)/(3,707 max watts) $699.99 

KDZA0002YSLICK Kart, Falcon Electric Yellow Rev:3 W/Slick Tires $1,699.00 

GO KARTS 

KDZA0002RSLICK Kart, Falcon Electric Red Rev:3 W/Slick Tires $1,699.00 

INFLATABLE, PORTABLE TRACK. 

1. Looking for an inexpensive way to generate revenue? 

2. Do you have empty space on your grounds that is not making you money? 

The inflatable Falcon track may be the solution you are looking for! Keep families at your 

facility longer by keeping your youngest guests happy with an attraction designed just for 

them. This portable, heavy-duty track sets up in minutes and only takes up 48’ by 31.5’ 

of space. It’s powered by a standard 110v blower, so no expensive wiring is required to 

maximize the fun and extra revenue! 

Dimensions: 48’x31’x8’ 

Track includes heavy-duty blower. 

Falcon go karts not included. 

Generator not included. 

Top Current generator 

# 9-60-0012 

Shown with handle extended 

(Extention cord not included) 


OFTEN IMITATED, BUT NEVER DUPLICATED. 

3 

BUMPER BOATS 

BLASTER BOAT 

The BEST electric bumper boat money can buy! That is a 

pretty big statement and something that is thrown around a 

lot, but we wouldn’t say it if we didn’t know that it was true. 

We started making the electric boat over 15 years ago after 

seeing the need in the marketplace. The progression we 

made with design each year brought us to where it is now: an 

electric version of our bumper boat that will last all day on a 

single charge and is durable enough to last through year after 

year of concession use. It is by far the most popular bumper 

boat we offer, outselling the gas boat 10 to 1. With the built-in 

water squirter, the guests will be happy and you’ll be laughing 

all the way to the bank! 

3 

 

 

WATER BUG 

J&J’s Water Bug “pump” gas-powered bumper boat: the 

original is still going strong with over 20,000 produced! First 

patented by J&J in the early 1970’s, the first bumper boats 

were manufactured to add an exciting water activity to fun 

centers. Since that time, we have improved and refined the 

design into the largest-selling bumper boat attraction in the 

world. Generating high revenues with a small footprint, this 

unit is often copied, but never duplicated. A true classic in its 

own right! 

THE DESIGN PHILOSOPHY WE APPLIED TO OUR ROUGH-AND-READY GO KARTS WAS DEVELOPED WHILE BUILDING 

OUR RENOWNED BUMPER BOATS. 

While J&J Amusements is most widely known for its go karts, we actually started back in the seventies building bumper boats. The 

original owners of J&J Amusements operated several busy family entertainment centers, and used that experience to develop the 

world-famous Water Bug and Blaster bumper boats. 

The rugged fiberglass hull boasts the largest load capacity (450lbs) in the industry. 

State-of-the-art, corrosion-resistant materials add safety, a long service life and simplicity of operation and maintenance. These 

boats offer more “smile to the mile” than any other action ride or event in a park. If you want to take pictures of guests having a 

great time, go to the bumper boat pond. 

48 


THE BEST ELECTRIC BUMPER BOAT EVER! 

3/4 horsepower, 

high-efficiency, 

24Volt electric motor 

with lowest amp 

draw in the industry 

WITH ELECTRIC POWER AND A “WATER BLASTER” SQUIRTER, YOUR CUSTOMERS 

WILL COME BACK FOR MORE. 

ALL-DAY OPERATION ON A SINGLE CHARGE! 

Color-coded 

go/squirt buttons 

Heavy-duty 

fiberglass hull 

BUMPER BOATS 

Heavy-duty 

aluminum handlebars 

with foam grips 

Magnetic trigger 

Stainless steel 

handrails & all stainless 

hardware 

Remote shut-down 

(standard on U.S. models 

only) 

Super Tube 2, 

A multi-colored tube 

built with a polyurethanecoated 

fabric 

Powerful squirt 

pump 

Access port 

for easy charging 

Volt meter 

Plastic prop 

Battery fill port 

(water) 

Epoxy coated 

steel prop guard 


J&J’S GAS-POWERED BUMPER BOAT...THE ORIGINAL STILL GOING STRONG! 

BF2.3D ENGINE 

Chosen for its reputation for dependable service, and its reduced emissions (less smoke and less oil in the water), this motor 

quietly performs. Initially designed for use in the corrosive marine environment, this dependable unit has been modified to be 

controlled from behind, and transformed to operate in bumper boat pond conditions. 

BUMPER BOATS 

SUPER TUBE 2 

The Super Tube is constructed of a UV-resistant polyurethane material. The Super Tube’s material allows for easy storage; it can 

be folded and boxed up and then re-inflated in the spring. All tubes come with a prorated 5 year warranty. 

FIBERGLASS HULL 

Fiberglass hull comes in an array of colors to choose from. Pick two colors from our extensive color list, and we’ll build it. Match 

it up with an optional (standard on Blaster boat) Super Tube in your choice of two colors and we’ll do the rest. 

STAINLESS STEEL HAND RAILS 

J&J is always concerned with safety, and we design our products with it at the top of the design criteria. With this in mind, we 

added the safety hand rails to the bumper boat hulls to allow safer and easier access into and out of the bumper boats. 

PROP GUARD 

Our prop guards are designed to allow maximum flow, while meeting the safety requirements of every known standard. Built 

to last in the most corrosive of environments, prop guards are made of steel, then epoxy coated to extend life and reduce 

electrolysis. 

Epoxy coated 

steel prop 

guard 

Room for 3; 

1 adult & 2 children 

J&J equipped 

Honda BF2.3D 

gas engine 

Colorful 2 color 

fiberglass hull 

Stainless steel 

handrails & 

all stainless 

hardware 

Heavy-duty 

Super Tube 2 

50 

Specifications and prices subject to to change without notice. Download latest update to to this catalog on-line.

BATTERIES 


1-61-0078 Battery, 12v Electric Start Kart (PT7B-4) Call 

1-61-0056 Battery, 12v Electric Start Kart (UB12180) Call 

F030F09-31500-0 Battery, 12V Falcon 12v50AH TEV12500 (Stock) Call 

10251 Battery, 6V Elec Boat (Trojan T105) Call 

2-70-0078 Battery, 6V Elec Boat (Trojan T125) Call 

2-70-0079 Battery, 6V Elec Boat (Trojan T145) Call 

1-15-0036 Battery, 12V Optima Deep Cycle (Blue Top) Call 

BUMPER BOATS 

2-70-0077 Battery, 12V Optima Deep Cycle D34/78-950(Yellow Top) Call 

#1-61-0078 #1-61-0078 

#10251, #2-70-0078, 

#2-70-0079 

BATTERY MAINTENANCE 

#1-15-0036 #2-70-0077 


2-70-0034 Battery Fill, Trojan/US/Crown Battery Kit (SEE NOTES) $118.48 

2-70-0108 Coupler, Quick Release, Bulkhead, Battery Fill Viton $17.50 

2-70-A0021C Battery Fill, Squeeze Bulb Filler (Complete) $41.67 

2-70-0204 Battery Fill, Hose $0.31 

2-70-0199 Battery Fill, O-Ring Mainfold $0.29 

2-70-0203 Battery Fill, Red Cap for Swivel T $0.22 

#2-70-0034, Battery fill system. 

2-70-0200 Battery Fill, Valve $23.45 

001841 Coupler, Quick Release 1/4” Barb Male(Polypropylene W/Viton) $5.28 


2-70-A0020T Battery Fill, Trojan/US Battery Retro Kit (parts only) $122.00 

XPRESS FLOW BATTERY WATER FILL SYSTEM FILLS 10 BOATS IN ABOUT 15 MINUTES! 

The new Xpress Flow battery watering system is a new accessory that makes the difficult 

task of watering vehicle batteries elementary. 

The entire topping process takes just 20 seconds or less per battery. Hook this system up to 

your electric bumper boat fleet and keeping your batteries in top condition will be a snap. 

Never before has operating a fleet of electric bumper boats been easier. From battery 

water maintenance to charging, FPX has all the answers. 

Quick connect 

coupler 

Don't waste your time opening boat 

tops or seat covers. The Xpress Flow 

system utilizes this quick connect 

coupler to attach the watering 

system. 

#2-70-A0021C #2-70-0204 #2-70-0199 #2-70-0200 


BATTERY ACCESSORIES 


2-70-0149 Meter, Volt Indicator EBB (Round W/ J&J Logo) $24.47 

BUMPER BOATS 

#3-60-0081, Battery load tester. 

3-60-0081 Tool, Battery Load Tester 500amp $195.84 

3-96-0100 Tool, Battery Tester 6 or 12 volt $111.18 

2-80-0003 Tool, Hydrometer Easy Read For Checking Lead/Acid Battery $15.08 

2-70-0073-120 Tool, Terminal Crimper Hex Crimp Jr. (SB-50 & SB-120) $235.99 

#2-70-0073-120, 

Terminal crimper. 

#2-70-0149, Volt 

meter. 

#2-80-0003 

FUSE & FUSE RELATED 


08777SS Fuse, 5 Amp (12volt Electric Boat Bilge Pump) $1.97 

2-60-0106 Fuse, 50AMP Master Charger $56.50 

2-60-0107 Fuse, 15 Amp AGC Master Charger $0.40 

2-70-0030 Fuse, 40 Amp ATC $0.94 

#2-60-0102, 

Circuit breaker. 

#2-70-0153, Bus 

bar. 

2-70-0083 Fuse, 10 Amp ATC $3.37 

2-70-0104 Fuse, 3 Amp Slow Blow (Squirter & 24v Bilge Pump) $1.53 

3-70-0001 Fuse, 250 Amp Electric Battery $8.71 

3-70-0002 Fuse, 100 Amp Mega $7.29 

79005 Fuse Holder, Waterproof w/clips $7.25 

2-60-0102 Breaker, Circuit 50Amp Panel Mount 187-Series $75.00 

2-70-0103 Fuse Holder, Waterproof Panel Mount $4.13 

2-70-0153 Busbar, 5/16” stud w/10-32 accessory points DualBus pos/neg $32.00 

1-60-0346 Fuse, 1 Amp ATC $3.37 

#2-70-0030 #2-70-0083 

1-60-0168 Fuse, 15amp Falcon charger $0.35 

#2-70-0104 #3-70-0001 

#2-60-0106 

#2-70-0103 

#08777SS 

#3-70-0002 

#79005 

#2-60-0107 

RELAYS 


2-70-0033 Relay, Assy EEB Slip Ring Style & Flex Wire (Dipped W/Wires) $80.78 

#2-70-0033 

52 


BATTERY PLUG ENDS 


2-70-A0018 Plug Adapter, SB50 to SB120 Adaptor for Master Charger $35.85 

2-70-A0022 Plug Assy., SB-120 Complete w/Housing, Strain Relief,Term $21.99 

#2-70-0211 

This combination strain relief and 

plug end protector has an easyto-grab 

hand hold for connecting 

and disconnecting SB-120 charger 

plugs from your bumper boats. 

No more broken plug ends from 

charger leads being dropped on 

the ground. 

2-70-0097 Terminal Contact, SB-120 Nickel Plated (each) $6.99 

2-70-0211 Cover, SB120 FPX (each half) $5.61 

2-70-0211KIT Cover, SB120 FPX Kit (includes hardware and two halves) $14.03 

#2-70-A0018 

While supplies last. 

Have the old-style SB-50 connectors and need to match them 

up to SB-120 connectors? We've got the solution. This SB-50 

to 120 plug adapter will do the trick. 

#2-70-A0022 

BUMPER BOATS 

BATTERY CHARGERS 


2-60-0079 Charger, Battery Master Charger 30Amp 110/220Vac 24Vdc SB120 $355.00 

2-60-0098 Charger, Battery Master Charger 30Amp 110Vac 24Vdc SB120 $333.00 

30 Amp Master Charger by FPX 

BATTERY CHARGER ENCLOSURES 


2-80-0006 Box, Charger EBB 2 Unit (Fiberglass)(White) $473.28 

2-80-0007 Stand, charger Box EBB 2 Unit (Fiberglass)(White) $113.22 

2-80-0008 Box,Charger Vent Mini Round White Polypropylene 3”(4PK) $6.68 

2-80-A0006 Box Assy, Charger EBB 2 Unit Complete (Fiberglass)(White) $586.50 

THIS CHARGER ENCLOSURE CAN HOLD TWO FPX MASTER 

CHARGERS OR OTHER BRANDS. 

#2-80-A0006 

Complete charger 

box assembly. 

(chargers not included) 

The vented enclosure allows heat to escape and keeps your 

battery chargers high and dry. 

This enclosure has a simple white finish and will look 

unobtrusive around your bumper boat pond. 

Simply anchor it to your concrete or wood deck. All electric 

connections are hidden inside. 


TUBES - SUPER TUBE 2 


2-90-0001 Tube, Super Tube 2 Red/Red $375.00 

BUMPER BOATS 

J&J Super Tube II on electric-powered 

Blaster boat 

J&J’s Super Tube is a great eye 

pleaser for your boat pond. The 

Super Tube is constructed of a 

UV-resistant Urethane material. 

The Super Tube’s material allows 

for easy storage; it can be folded 

and boxed up and then reinflated 

in the spring. Patching 

this tube is easy with J&J’s 

tube patch kit. Prorated 5 year 

warranty. 

2-90-0002 Tube, Super Tube 2 Dk. Blue/Dk. Blue $375.00 

2-90-0003 Tube, Super Tube 2 Yellow/Yellow $375.00 

2-90-0004 Tube, Super Tube 2 Black/Black $375.00 

2-90-0006 Tube, Super Tube 2 Black/Yellow $375.00 

2-90-0007 Tube, Super Tube 2 DK. Blue/White $375.00 

2-90-0008 Tube, Super Tube 2 Dk. Blue/Yellow $375.00 

2-90-0009 Tube, Super Tube 2 Red/White $375.00 

2-90-0010 Tube, Super Tube 2 Red/Yellow $375.00 

2-90-0011 Tube, Super Tube 2 Red/Dk. Blue $375.00 

2-90-0012 Tube, Super Tube 2 Yellow/White $375.00 

2-90-0017 Tube, Super Tube 2 Lt. Green/Lt. Green $375.00 

2-90-0018 Tube, Super Tube 2 Yellow/Lt. Green $375.00 

2-90-0019 Tube, Super Tube 2 Lt. Green/White $375.00 

2-90-0020 Tube, Super Tube 2 Lt. Green/Red $375.00 

2-90-0021 Tube, Super Tube 2 Lt. Green/ Dk. Blue $375.00 

Textured tubes 

J&J's Poly Vinyl tubes are made to take abuse. J&J’s textured tubes come in these great 

colors: Black, Blue, Green, Red or Yellow. If you have rough dock edges or other abrasive 

surfaces this tube is for you! 

TUBES - BUMPER BOAT, TEXTURED (SPECIAL ORDER) 


00352 Tube, Txt. (Red) Bumper Boat Call 

00353 Tube, Txt. (Blue) Bumper Boat Call 

00354 Tube, Txt. (Yellow) Bumper Boat Call 

00355 Tube, Txt. (Green) Bumper Boat Call 

00360 Tube, Txt. (Black) Bumper Boat Call 

Minimum quantities apply for special order items. 

#2-60-0053 

#002683 Self Adhesive Trim 

TRIM - BOAT HULL & MOTOR 


002683 Trim, Self Adhesive 1/4 x 1/2 (Karts & EBB Cover) sold by FT $2.00 

002778 Trim, Self Adhesive Bumper Boats/ThunderBolt 15 ft. $91.99 

2-60-0053 Valve, Supertube Assy., (UPPER AND NUT) $20.87 

54 


TUBE REPAIR - BUMPER BOAT 


003370 Patch, Supertube Repair Kit $50.38 

003371 Patch, Supertube Maintenance & Repair Kit $101.99 

#003370, Super Tube repair kit 

00333 Patch, Tube Patch Kit #A (Txt Tube Only) $28.05 

00336 Patch, Red Tube TXT Standard Tube Only $1.97 

003360 Patch, Blue Tube TXT Standard Tube Only $1.97 

003361 Patch, Green Tube TXT Standard Tube Only $1.97 

003362 Patch, Yellow Tube TXT Standard Tube Only $1.97 

BUMPER BOATS 

Exact color match patch 

subject to availability. 

003364 Patch, Black Tube TXT Standard Tube Only $1.97 

00365B-PATCH Patch, Supertube Patch Kit 00365B’s $5.61 

2-60-0072 Glue, Tube Supertube 4oz can (HH 66 Vinyl Cemet) $12.50 

#003371, Super Tube 

maintenance & repair kit 

#2-60-0072, 4OZ glue 

#2-60-0046 

TUBE TOOLS - BUMPER BOAT 


2-60-0046 Gauge, Low Pressure 0-15 (Used for Super Tube) $58.00 

3-96-0024 Gauge, Low Pressure 0-15 (Super Tube & Poly Tube(Motion Pro) $95.00 

00367 Filler, Super-Tube Plastic Type $8.86 

2-60-A0006 Filler, Super Tube (Use ST Cap and Valve) Fill Super Tubes $16.83 

2-60-0124 Tool, Inflator/Deflator Super Tube 4.0hp 130cfm $199.00 

2-60-0123 Tool, Super Tube Valve Tightener (Plastic Style) $5.56 

#3-96-0024 

Low pressure gauge (reads 

up to 15psi) 

THE SUPER TUBE INFLATOR/DEFLATOR IS SIMPLY A GREAT TOOL. ITS 4HP MOTOR 

GENERATES ENOUGH AIR MOVEMENT TO FILL A SUPER TUBE IN 30 SECONDS! 

Its also great for blow drying your go karts after washing. 

#2-60-0123 

Super Tube valve tool 

#2-60-A0006 

Super Tube pressure 

test adapter & filler 

#00367 

Super Tube filler 

adapter 

#2-60-0124 

Inflate or deflate tubes in 

no time at all with this 4 

hp vacuum/blower 


THROTTLE CABLES 


BUMPER BOATS 

Throttle cables 

#00434 

00427 Cable, Throttle, 25-1/4” W/Spring (Honda BF2A) $20.20 

00428 Cable, Throttle 29” (New Barnett) $18.84 

00430 Cable, Throttle, 20-1/4” W/Spring (Honda BF2A) $20.91 

2-30-0003 Cable, Throttle Honda BF2D (Converts Twist to Lever) $34.56 

6433494 17910-ZW6-702 Cable, Throttle $46.09 

8779720 17920-ZW6-020 Cable, Throttle BF2D $7.20 

#00432 

LEVERS - BUMPER BOAT 


00432 Lever, New Throttle $9.31 

00434 Lever, Throttle (KHS 3-FGR.BRK.LVR.) $20.39 

#00122 

CABLE CARE 


00122 Cable Lubricator Luber $20.74 

3-60-0029 Cable Life (Lube Only) $11.99 

HAND GRIPS - BUMPER BOAT 


00238 Grip, Bumper Boat Motors (Red) $3.99 

#00121 

00239 Grip, Electric Bumper Boat (Black) $9.50 

2963874 08712-0001 CEMENT (1 OZ.) Grip Glue $5.11 

#2963874, hand grip 

cement, 

#00239 

#00238 

MISCELLANEOUS BUMPER BOAT ITEMS 


2-20-A0003 Guard, Prop Free Flow Assy (Honda/Electric) Carolina $169.00 

2-20-0006 Propeller, EBB 3-Blade Power Prop (Modified EBB) $86.03 

2-60-0086 Pump, Squirter - 24v Submersible (Brushless White) $46.86 

25SM24 Pump, Bilge Electric Boat 24vdc $85.50 

2-60-0128 Pump, Squirter - 12v Submersible (Foster) $46.86 

#2-20-A0003, prop guard 

#2-20-0006 ,3 blade 

power prop for 

electric boat. 

#2-60-0128 , 

12V submersible-style 

pump, Foster boats. 

#2-60-0086 , 

24V submersible-style 

squiter pump 

Bildge pump, 12vdc, #25SM 

24vdc, #25SM24 

56 


FUEL ACCESSORIES 


WE1-3.5C Eliminator, Water 3.5 Inch $12.22 

ELIMINATE WATER/FUEL PROBLEMS 

Whether you are storing fuel or operating a boat, motorcycle, lawn mower, ATV, personal 

watercraft, snow blower, generator, or other machinery, you need the Water Eliminator; 

the most cost-effective way to remove water from gasoline, diesel, fuel oil, kerosene or 

hydraulic fluid. Easy to use; just clip the Water Eliminator to your fuel cap and lower it into 

the tank. The unit will remove any water it contacts, leaving you with dry fuel. By removing 

water directly from fuel, it helps to prevent many service problems related to water 

contamination. 

BUMPER BOATS 

COUPLERS - FUEL LINES 


PMCD17-03 Coupler, Female 3/16 Fuel Shutoff (Used with PMC22-03 Ma $12.02 

PMC22-03 Coupler, Male 3/16 Fuel hose (Use With PMCD17-03 Female) $4.44 

PMCD17-04 Coupler, Female 1/4 Fuel Shut Off $8.16 

PMC2304V Coupler, Quick Release 1/4” Barb Male(Viton)90 degree Elbow $5.28 

#PMCD17-03 

001841 Coupler, Quick Release 1/4” Barb Male(Polypropylene W/Viton) $5.28 

001845 Coupler, Quick Release (Female)(Fits 1/4” Hose) -Boats $2.81 

001846 Coupler, Quick Release (Male)(Fits 1/4” Hose) -Boats $2.10 

#PMC22-03 

001840 Coupler, Quick Release Shutoff 1/4 npt Female $11.18 


3-60-0003 O-Ring, Fits PMC22-03 Viton $0.15 

3-60-0028 Sealant, Permatex #2 1.5oz Tube $17.00 

001772-G Filter, Fuel 60 Micron Stainless Steel, PET Ho $3.50 

#3-60-0001 

#PMC2304V 

#001841 

#001840 

60 MICRON 

IN-LINE FUEL 

FILTER 

#001772-G 

Ethanol compliant 

QUICK DISCONNECT 

Couplers for your fuel line 

eliminate hassles. No more 

unscrewing hose clamps and 

spilling fuel. These couplers just 

push, click and release. 

#PMCD17-04 

#001845 

#001846 

#2-70-0108 

#3-60-0028 


SPARK PLUGS 


09407591 Spark Plug, BMR4A 98073-54744 $3.26 

BUMPER BOATS 

#14411120 

#00325 

Go kart 

Go kart 

14411120 Spark Plug, BPR6ES 98079-56846 $3.26 

00325 Spark Plug, BPR4ES (Hot Spark for GX Series Engines) $2.67 

16724430 Spark Plug, BPR5ES Hot 98079-55846 $3.53 

98056-54777 Spark Plug, CR4HSB 98056-54777 (BF2.3D Only) See Notes $3.26 

5384631 Spark Plug, CR5HSB 98056-55777 (BF2D Only) See Notes $3.26 

1455427 Spark Plug, BP4ES 98079-54841 $3.04 

1-61-0038 Spark Plug, BR5HS (Robin 4hp - 9hp) Hot $4.08 

1-61-0037 Spark Plug, BR6HS (Robin 4hp - 9hp) STD $2.66 

16724500 Spark Plug, W16EPR-U 98079-55855 $3.68 

14411200 Spark Plug, W20EPR-U-ND 98079-56855 $3.73 

STARTER ROPE/GRIPS 

Starter Rope 


52687921 Rope, Starter 200’ Roll #4.5 (Bumper Boat)08545-ZG921-11 $22.99 

52688180 Rope, Starter 200’ Roll #5.5(Go Karts Only) $26.27 

28461-Z5T-305 28461-Z5T-305 Grip, Starter $5.99 

9359142 28461-ZE2-W03 Grip, Starter $8.08 

#9359142 #28461-Z5T-305 

POND/POOL - INFLATABLES 


2-60-0056 Ball, 40” Black/White Soccerball $94.00 

2-60-0057 Ball, 40” (102cm) Beachball $94.00 

2-60-0136 Ball, 40” (102cm) Tennis Ball $94.00 

2-60-0137 Ball, 40” (102cm) VolleyBall (Blue/White) $94.00 

LIVEN UP YOUR BUMPER BOAT POND WITH THESE LARGE 

DIAMETER (40”), LIGHTWEIGHT BALLS. 

58 


ROPE - BUMPER BOAT 


00388 Rope, Yellow Bumper Boat (Sold By Ft) $0.51 

00036-S Hook, Snap Style Boat (Standard) $8.99 

00387 Fid, Rope Splicing 1/2” $2.24 

Each boat should be fitted with two Boat Hooks and 3 to 5 feet of 

bumper boat rope. (Note: bumper boat rope length is determined 

by how far the dock rails are spaced from the edge of the pool.) 

BUMPER BOATS 

Hollow Core Boat Rope 

Stainless Steel Boat Hook 

#00387, FID 

DOCK RAILS 

#00711SS 


A007145SS Dockrail Assy, S/S Powder Coated, (Rail,Cplr & Mount,”Wood”) $296.21 

A007146SS Dockrail Assy, S/S Powder Coated,(Rail, Tailpiece & Coupler) $155.00 

00716SS Dockrail, S/S Powder/Coated (Concrete or Wood) $120.05 

00711SS Dockrail, Coupler (S/S) 1 1/2” $10.20 

00713SS Dockrail, Tail Piece (S/S) $38.15 

#00716SS 

#00713SS 

DOCK RAILS ARE NOW FULLY STAINLESS STEEL WITH BLUE 

POWDER COAT. 

Don't sacrifice safety! Only FPX bumper boat pond dock rails should 

be used for any bumper boat pond. Swimming pool rails are not 

designed for this use. 

Stainless steel construction 

Powder coated 

2 per boat for safety 

DON’T LET YOUR BOATS DRIFT 


POND ACCESSORIES - INTERACTIVE POND SQUIRTER 


2-60-A0024 Pondside Squirter Assy, Coin Operated 24v 1.125 Token $1,200.00 

BUMPER BOATS 

2-60-A0028 Pondside Squirter Assy, Coin Operated 24v CAD Loonie $1,200.00 

2-60-A0008 Pondside Squirter Assy, Coin Operated 24v USD/CAD Quarter $1,200.00 

2-60-A0027 Pondside Squirter Assy, Coin Operated 24v NO COIN ACCEPTOR $1,200.00 

2-60-A0023 Pondside Squirter, Timing Box Assy Complete W/O Stand $799.95 

2-60-0093 Timer, Pond Side TL $140.25 

2-60-0112 Transformer, 120V to 24VDC Pond Side Squirter $39.99 

2-60-0078 Valve, Pond Side Squirt Direct-Act Mini Solenoid Valve 1/8” $65.00 

WANT MORE REVENUE FROM YOUR BUMPER BOAT POND? 

Try the coin operated Master Blaster from FPX. Just mount a few of the Master Blaster 

water squirters around your bumper boat pond and voila! A simple, rugged money maker. 

Easy installation with four, 1/2” anchor bolts on 10-1/2” centers and one half-inch NPT nipple 

to interface with the park’s fresh water supply system. Uses 24VAC current provided by 

transformer (included). Always check local codes. 

Metal parts protected by special double coating process for corrosion protection. Each unit 

can be adjusted (height, water flow and pivot arc) to meet your needs. Fitted with a quick 

change coin/token mechanism. 

The pondside squirter requires municipal fresh water supply. 

60 


POND CLEANING AGENTS 


#2-80-0001 

3-60-0019 Pool, Clean & Perfect 5Gal. (640oz) $236.22 

3-60-0018 Pool, Clean & Perfect (22oz Trigger Spray) $7.93 

3-60-0015 Pool, Perfect Cleaner Concentrate 3L (101.50 oz) $38.10 

3-60-0017 Pool, Phosfree 3L (101.50 oz) $31.37 

2-80-0001 Test Kit, Water Complete High K-2005 (Test Kit for Pools $109.43 

2-80-0002 Test Kit, Water Phosphate Only (0-1000 ppb) $52.73 

BUMPER BOATS 

3-60-0022 Pool, Cleaner Automatic Dosage Dispenser $359.04 

#2-80-0002 

#3-60-0022 

Clean & Perfect digests and biodegrades the oils and fuel that cause 

that unsightly black water line deposit on pond liners and boats 

and which also clogs the filter. Clean & Perfect turns oil into carbon 

dioxide and water so that it will not return to cause additional 

cleaning problems. 

Clean & Perfect works as a cure for an existing problem and can be 

used to maintain the oil-free condition of the water. 

Eliminates unsightly black water lines. 

Unclogs filters. 

100% biodegradable. 

Keeps bumper boats and liner cleaner. 

Non-flammable. 

Clears cloudy water. 

Non-toxic. 

Digests and converts oils to carbon dioxide and water. 

Reduces flammability of gasoline spills. 

Increases life of vinyl liner. 

Deodorizes pond water. 


BATTING CAGE BALLS 


5-60-0001 Baseball, Yellow Urethane ® (DZ) $43.00 

5-60-0002 Baseball, Orange Softflight ® (DZ) $45.00 

5-60-0003 Softball, Yellow Urethane ® (DZ) $52.46 

EXCLUSIVE DESIGN & MANUFACTURED BY AUTOMATED BATTING CAGES 

These batting cage balls are specifically designed for accuracy in ABC’s "wheel-style" pitching machines. Along with the "standard" 

Urethane® balls, we also carry the "Softflight"; this ball helps to reduce "bat sting" and pitches just like standard balls..right on track! 

BATTING CAGE MINI-GOLF 

MINI GOLF ACCESSORIES 


8-20-0010 Pencils, Miniature Hexagon No Eraser (Non Imprinted) Sorted $8.93 

8-01-0001 Ball Dispenser, Rack $62.72 

8-20-0001 Scorecards, Miniature Golf (White, Green or Yellow) qty:1000 $31.98 

8-00-8BALL Ball, Miniature Golf 8 Ball DZ $17.23 

8-00-BLUE Ball, Miniature Golf Standard Blue DZ $12.01 

8-00-BLUE-FLT Ball, Miniature Golf Standard Blue Floater $12.23 

8-00-GREEN Ball, Miniature Golf Standard Green DZ $12.01 

8-00-GREEN-FLT Ball, Miniature Golf Standard Green Floater DZ $12.23 

8-00-LAVENDER Ball, Miniature Golf Standard Lavender DZ $12.01 

8-00-ORANGE Ball, Miniature Golf Standard Orange DZ $12.01 

8-00-ORANGE-FLT Ball, Miniature Golf Standard Orange Floater DZ $12.23 

8-00-PINK Ball, Miniature Golf Standard Pink DZ $12.01 

8-00-PURPLE Ball, Miniature Golf Standard Purple DZ $12.01 

8-00-RED Ball, Miniature Golf Standard Red DZ $12.01 

8-00-RED-FLT Ball, Miniature Golf Standard Red Floater D $12.23 

8-00-STARSTRIPE Ball, Miniature Golf Stars & Stripes DZ $15.95 

8-00-TYE-DYE Ball, Miniature Golf Tye-Dye Marbleized DZ $15.66 

8-00-YELLOW Ball, Miniature Golf Standard Yellow DZ $12.01 

8-00-YELLOW-FLT Ball, Miniature Golf Standard Yellow Floater DZ $12.23 

8-00-CUP Cup, Practice Green 4” x 4 1/4” $8.16 

Ball Dispenser rack, 

#8-01-0001 

#8-00-8BALL # 8-00-STARSTRIPE #8-00-TYE-DIE #8-00-CUP 

62 


MINI GOLF PUTTERS - RUBBER CLUB 


8-10-BKMBL-HEAD Putter, Rubber End Shaft Replacement Head Black Marble $7.09 

Rubber end putters 

8-10-BLACK-HEAD Putter, Rubber End Shaft Replacement Head $7.09 

8-10-BLACK24 Putter, Rubber End Shaft 24” $12.47 





8-10-BLACKCU Putter, Rubber End Shaft Custom $20.35 

8-10-BLUE-HEAD Putter, Rubber End Shaft Replacement Head $7.09 

8-10-BLUE24 Putter, Rubber End Shaft 24” $12.47 



BATTING CAGE 




8-10-BLUECU Putter, Rubber End Shaft Custom $20.35 

8-10-GREEN-HEAD Putter, Rubber End Shaft Replacement Head $7.09 

MINI-GOLF 

8-10-GREEN24 Putter, Rubber End Shaft 24” $12.47 





8-10-GREENCU Putter, Rubber End Shaft Custom $20.35 

8-10-LAVEN-HEAD Putter, Rubber End Shaft Replacement Head $7.09 

8-10-LAVENDER24 Putter, Rubber End Shaft 24” $12.47 





8-10-LAVENDERCU Putter, Rubber End Shaft Custom $20.35 

8-10-RED-HEAD Putter, Rubber End Shaft Replacement Head $7.09 

8-10-RED24 Putter, Rubber End Shaft 24” $12.47 






8-10-REDCU Putter, Rubber End Shaft Custom $20.35 

8-10-YELLOW27 Putter, Rubber End Shaft 27” $12.47 

8-60-0001 Putter, Rubber End Fiberglass Shaft 35” $18.43 


MINI GOLF PUTTERS - PLASTIC 


8-10-PLASTIC-B Putter, Childs Plastic Putter (Blue) $5.60 

8-10-PLASTIC-G Putter, Childs Plastic Putter (Green) $5.60 

8-10-PLASTIC-R Putter, Childs Plastic Putter (RED) $5.60 

BATTING CAGE MINI-GOLF 

Childs plastic putters 

MINI GOLF PUTTERS - SATIN SHAFT/HEAD 


8-10-PSC-HEAD Putter, Satin Center Shaft Replacement Head $5.10 

8-10-PSC24 Putter, Satin Center Shaft 24” $8.11 



Satin shaft/end putters 



8-10-PSCCU Putter, Satin Center Shaft Custom Length $9.69 

8-10-PSE-HEAD Putter, Satin End Shaft Replacement Head $5.10 

8-10-PSE24 Putter, Satin End Shaft 24” $8.11 





8-10-PSECU Putter, Satin End Shaft Custom Length $9.69 

64 


PROTECTIVE CLOTHING/GEAR 


3-00-5000 Glove, Original 8 Small Mechanix Black $37.01 

3-00-5001 Glove, Original 9 Medium Mechanix Black $37.01 

3-00-5002 Glove, Original 10 Large Mechanix Black $37.01 

3-00-5003 Glove, Original 11 X-Large Mechanix Black $37.01 

3-00-5004 Glove, Original 12 XX-Large Mechanix Black $33.64 

Mechanix Wear 

original glove 

3-00-5005 Glove, Solvent 9 Medium Mechanix Green $14.74 

3-00-5006 Glove, Solvent 10 Large Mechanix Green $16.22 

3-00-5007 Glove, Solvent 11 X-Large Mechanix Green $16.22 

3-00-5012 Glove, Fast Fit 9 Medium Yellow $22.13 

Nitrile latex gloves 

3-00-5013 Glove, Fast Fit 9 Medium Blue $22.13 

3-00-5015 Glove, Fast Fit 10 Large Black $16.78 

3-00-5016 Glove, Fast Fit 9 Medium Black $16.78 

3-00-5018 Glove, Cold Weather Size 9 Medium $33.61 

3-00-5022 Glove, Cold Weather Size 10 Large $33.61 

Mechanix Wear 

support Belt 

3-00-5023 Glove, Fast Fit 10 Large Red $16.78 

3-00-5024 Glove, Kids Crew Red $15.25 

3-00-5031 Glove, Original 10 Large Mechanix Green $28.04 

Mechanix Wear 

kevlar knee pads 

Solvent gloves 

3-00-5032 Glove, Kids Crew Blue $15.25 

3-00-5033 Glove, H23 Series 2.3 Ultra-Grip Glove Size 9 $25.80 

6614804 Glove, 08865-MCX-700 Glove, Honda Medium $42.61 

6614812 Glove, 08865-MCX-710 Glove, Honda Large Size 10 $36.52 

3-00-5010 Belt, Support Mechanix Black Fits 30” to 40” Waist $59.16 

SHOP SUPPLIES 

AND ACCESSORIES 

3-00-5011 Belt, Mechanix Black/White Fits 28” to 42” Waist $23.62 

3-00-5008 Apron, Mechanix Black $36.94 

3-00-5017 Apron, Mechanix Red $28.00 

3-00-5009 Knee-Pad, Mechanix Black $75.46 

Mechanix Wear 

mechanics apron 

Mechanix Wear 

radio belt 

3-96-0028 Tool, Glove Boy Nitrile 6mil Large 100ea. $21.41 

3-96-0027 Tool, Glove Boy Nitrile 6mil XL 100ea. $21.41 

MECHANIX WEAR GLOVE SIZE CHART 

Place hand on gauge as shown for proper sizing. A snug fit is 

preferred for optimum glove performance. 


CORROSION PROTECTION 


3-60-0002 Corrosion Block, Grease 2 oz. Tube $6.25 

99101 Corrosion Block, Aerosol 12 oz. Protector/Penetrant $20.35 

99101S Corrosion Block, Pump Spray 4 oz. Protector/Penetrant $8.15 

99108 Corrosion Block, Grease 14oz Cartridge $14.99 

99109 Corrosion Block, Grease 16oz $14.79 

2-70-0112 Grease, Dielectric 5.3oz Tube Electrical Inulating & Protect $23.80 

DO YOU NEED A CORROSION CONTROL SOLUTION? CORROSION BLOCK SOLVES YOUR PROBLEMS! 

Experts estimate that protecting your equipment now is ten times cheaper than repairing it later. As a bonus, electrical and 

mechanical parts will run smoother and more efficiently. 

SO WHAT IS IT? 

Corrosion Block is a revolutionary product that: 

Kills corrosion on contact. 

Stops corrosion from ever coming back. 

Lubricates the area. 

Is safe to nearly all electronics. 

DID YOU KNOW THAT CORROSION BLOCK: 

Is the US military’s corrosion control product of choice? 

Was used during the filming of The Titanic? 

Was used during the filming of Water World? 

SHOP SUPPLIES 


THESE ORGANIZATIONS TRUST THEIR MULTI-MILLION DOLLAR EQUIPMENT WITH CORROSION BLOCK... SHOULDN'T YOU? 

THREAD LOCKERS & GLUES 


3-20-0001 Loctite, Threadlocker 10ml Bottle (Blue) $28.05 



3-20-0004 Loctite, Threadlocker 10ml Bottle (Red) $28.05 



4-95-0011 Loctite, High Strength “Red” 10ml. Bottle $29.17 

4-95-0044 Loctite, 50ML “Green” $94.07 

81790 Loctite, Blue 250 ml $217.14 

81793 Loctite, Red 250 ml $232.74 

013330 Glue, 3.7oz Tube (Goop) $10.81 

013331 Glue, Goop Cartridge $11.22 

A threadlocker is an anaerobic adhesive used on threaded 

metals that cures at room temperature in the absence of 

air. The adhesive completely fills the gaps between mating 

threads to lock and seal the threaded assembly. 

Marine Goop 

LOCTITE® Threadlockers come in a wide variety of strengths 

and specialty formulations, including permanent and 

removable threadlockers. 

66 


CLEANERS & PROTECTANTS 


00316 Cleaner, Protect All Cleaner $19.26 

00317 Cleaner, Protect All Wash $14.81 

00320 Cleaner, Protect All 13oz Aerosol Spray $14.81 

SFG-Q Cleaner, Fiberglass 32 fl oz $8.93 

SZP-Q Cleaner, Boat Zoap (1 Quart) $10.57 

3-60-0033 Protectant, 303 Aerospace 2 oz. pump sprayer $2.75 

3-60-0034 Protectant, 303 Aerospace 32 oz. trigger sprayer $24.43 

3-60-0035 Protectant, 303 Aerospace 128 oz. gallon refill $64.21 

3-60-0037 Protectant, 303 Aerospace 5 gallon Bucket $279.99 

3-60-0078 Cleaner, Spray Cleaner/Polish $9.99 

6985634 08732-0010 Cleaner Contact (Formulated for California) $4.75 

It is important to maintain your go karts and bumper boats and keep them clean. This will make them more attractive for your 

customers, prolong their life and keep them safe. 

Plastic Polish 

32 OZ SPRAY 

PROTECTANT 

1 GALLON 

PROTECT YOUR INVESTMENT AND KEEP YOUR GO KARTS LOOKING NEW. 

5 GALLON 

SHOP SUPPLIES 


Faded go kart bodies? Cracked seat pads? 

303 aerospace protectant is the answer. 

We’ve all witnessed what the sun’s damaging UV light can do to fiberglass, paint, vinyl, etc. Go karts, bumper boats and 

probably most of the products used at your facility use some or all of these components. So how do you protect and keep 

them looking fresh during their long service life? 

The answer is to protect the surface with sunscreen, and 303’s Aerospace Protectant has it, SPF 40! That’s Sun Protection Factor 

40! This non-silicone-based sunscreen is not a cleanser. 

1. Use mild soap and water to clean your fiberglass and seat pads first. 

2. Rinse with clean water. 

3. Then simply spray on and wipe in the 303, just like you would on your own body. 

WITH REGULAR USE, 303 WILL KEEP YOUR GO KARTS AND BUMPER BOATS LOOKING FRESH AND SHINY...YOUR 

CUSTOMERS WILL APPRECIATE IT TOO. 

JUST LIKE THE BIG WAREHOUSE STORES, AT J&J YOU CAN PURCHASE BULK QUANTITIES AND SAVE MONEY! 


LUBRICANTS & OTHER 


2874451 08732-0001 Stabilizer (8 oz.) $4.19 

7341688 08732-0033 Stabilizer (32 oz.) $17.58 

3-60-0028 Sealant, Permatex #2 1.5oz Tube $17.00 

7698384 08734-0007 Sealant, 1530C $8.83 

2843670 08209-0001 Silicone Spray $4.47 

2962629 08732-0003 Lube/Rust Penetrant $3.81 

2963825 08713-0001 Hondalock 1 (10cc) Low Strength $3.81 

#29638661 

2963833 08713-0002 Hondalock 2 (10cc) Medium Strength $3.81 

2963841 08713-0003 Hondalock 3 (10cc) High Strength $3.81 

2963858 08713-0004 Hondalock 2HT (10cc) Medium Strength High Temp $3.81 

29638661 80734-0001 Molly 60 Paste $13.04 

2963809 08717-0004 Honda Bond 4 $7.92 

2963817 08718-0001 Honda Bond 4 HT $15.15 

#29638661 

3088127 08732-00232 Honda Brite Refill 32 oz. $13.27 

4075172 08732-0020B Honda Brite 20 oz $11.06 

2963882 08712-0002 Weatherstrip Cement $5.89 

SHOP SUPPLIES 


2963718 08732-0005 White Lithium Grease $3.91 

2963890 08798-0001 Grease Dielectric (.5oz) $9.99 

29637421 08208-0080 Shaft Oil, 8 0Z $3.64 

#2963718 

#2963817 #2963817 #3-60-0028 

#29637421 

#2843670 

#2963825 

68 


HELI COIL KITS 


3-60-0011 Tool, Heli-Coil Kit M6 x 1.0 $78.52 

3-60-0030 Tool, Heli-Coil Kit M14 x 1.25 Go-Kart Spark Plugs $89.99 

3-60-0032 Tool, Heli-Coil 3/8-24 Refill $2.05 

THE SIMPLE, COST-EFFECTIVE SYSTEM FOR REPAIRING OR CREATING STRONGER 

THREADS. 

THREAD REPAIR KITS - Recoil thread repair kits contain a quality HSS tap, installation 

tool, precision stainless steel inserts and instructions in a sturdy reusable container. 

Recoil has a full range of problem-solving repair kits, available in single or multiple size 

format. 

INSERTS - Recoil stainless steel inserts are manufactured in a full range of thread forms 

and lengths, and are available in convenient replacement packets, or bulk. 

TOOLING - Features the simple Recoil repair kit installation tool for general maintenance 

use. 

CABLE CARE 


00122 Cable Lubricator Luber $20.74 

3-60-0029 Cable Life (Lube Only) $11.99 

SHOP SUPPLIES 


For more information about cable care and use instructions see 

our video by scanning the QR code or visit our website at: 

http://www.jjamusements.com/videos/cable-luber-fpx/ 

Protects sleeved cables and prolongs cable life 


SHOP LIFTS 


1031 Lift, Assy Air Operated 24” x 80” $1,590.00 

1032 Lift, Assy Electric Operated 24” x 80” $1,725.00 

Electric Lift, #3-60-0043 

These small electric or 

manual lifts are perfect for 

maintaining small equipment. 

Lawn mowers. 

Track blasters. 

And more. 

3-60-0043 Lift, Multi-Lift(Electric) $1,222.98 

#1031, Air-operated lift 

SHOP SUPPLIES 


#1032, Electric lift 

THE AIR LIFT IS DESIGNED FOR ALL SHOPS. IT IS IDEAL FOR RAISING UP TO 

1000 POUNDS TO A 30-1/4” LEVEL FOR WORKING ON AN INFINITE NUMBER OF 

PRODUCTS. 

Go karts, Lawn Mowers, Appliance Repair, Motors, Air Conditioners and more. 

Easy, all around access for vehicle repair. Finish your work quickly and comfortably. 

Change tires, work on brakes, tune engines, change oil, clean, tear down and assembly. 

If you need more than the standard 24” width, take a look at our optional side extensions. 

Utilizing the quick detachable side extensions, you can turn your air lift into a versatile allpurpose 

lifting tool for a multitude of different items. 

AIR LIFT SPECIFICATIONS: 

Height - up 31”(78.7cm), down 7”(17.8cm) 

Length - Table 80”(203.2cm), ramp 20”(50.8cm) 

Width - Table 24”(61cm), with ext 40”(101.6cm) 

Weight - 310lbs(140kg) 

Air lift shown with optional double extensions 

70 


SHOP LIFT ACCESSORIES 


3-60-0049 Lift, Extension Side, 12” x 80” W/Ramps (Pair of 2) $360.00 

3-60-0041 Lift, Tool Tray $127.50 

3-60-0042 Lift, Handy Pole $76.50 

3-60-0039 Tool, Auxiliary Fuel Tank $48.96 

3-96-0020 Tool, Fuel Tank Aux $61.60 

Auxiliary fuel tank for lifts, 

#3-96-0020 

Lift extensions, #3-60-0049 

SHOP SUPPLIES 


#3-60-0039, auxiliary fuel 

tank for lifts, 

Pole attachment for lifts (lift not included), 

#3-60-0042 

#3-60-0041, Tool tray 

SHOP LIFT REPLACEMENT PARTS 


1-60-0028 Lift, Wheel Clamp (Used on Air/Electric Lifts) $160.45 

1-60-0064 Lift, Cylinder Repair Kit (Lift 1031) $85.00 

3-60-0031 Lift, Valve Stem Assembly Pedal $18.99 

#3-60-0031 

3-60-0004 Lift, Air Pedal $179.99 

#3-60-0004 


SHOP TOOLS 


3-60-0046 Tool, Parts Washer 30Gal. $1,222.98 

9-60-0012 Generator, GX200-196cc (2,966 rated watts)/(3,707 max watts) $699.99 

3-96-0011 Tool, Magnetic Parts Dish $14.03 

3-96-0001 Tool, Rotor & Sprocket Holder $38.04 

3-96-0012 Tool, T-Handle 10 slot Rack $27.94 

3-96-0026 Tool, Ball End Allen Set 9pc Metric $19.37 

3-60-0011 Tool, Heli-Coil Kit M6 x 1.0 $78.52 

#3-60-0046, 

30 gallon parts washer 

3-60-0030 Tool, Heli-Coil Kit M14 x 1.25 Go-Kart Spark Plugs $89.99 

3-60-0032 Tool, Heli-Coil 3/8-24 Refill $2.05 

1-60-1000 Tool, Hub Puller (5/16 or 3/8 Studs Rear or Front) $99.86 

01336 Tool Wrench, Nub Style Oil Plug Remover $14.81 

01337 Tool Wrench, Flat Style Oil Plug Remover $13.46 

SHOP SUPPLIES 


# 9-60-0012, 

Top Current generator 

shown with handle extended 

(extension cord not included) 

#1-60-A1000, hub 

puller 

#3-96-0011, magnetic parts 

dish, 

#2-70-0076, 

spanner wrench 

#3-96-0026, 

ball end allen set (metric) 

Metric or standard 

socket T-Handle set 

Metric #3-96-0002 

Standard #3-96-0003 

Flat-style oil plug wrench 

Nub-style oil plug wrench 

#3-96-0012, 

T-handle tool holder, 

#OTC-7403, 

gear puller 

#3-96-0001, rotor & 

sprocket holder 

72 


SHOP TOOLS 


3-96-0025 Tool, Chain Press Tool Kit (Side Plate) $63.39 

#3-96-0025, chain 

press tool, 

3-96-0031 Tool, Chain Alignment $29.57 

3-96-0017 Tool, Chainbreaker, CPT $34.17 

3-96-0018 Tool, Chain Riveting Tool and Riveting Tool $106.03 

3-96-0023 Tool, Chain Jumbo Chain Breaker #520 to #630 $156.97 

3-96-0019 Tool, Pliers, Master Link Clip $31.98 

3-96-0009 Tool, Compression Tester $163.70 

3-96-0021 Tool, Degree Wheel, Eng Timing $22.33 

3-96-0007 Tool, Dual Drive Mini 1/4” T-Handle $13.35 

#3-96-0023 

3-96-0008 Tool, Dual Drive Mini 3/8” T-Handle $15.37 

3-60-0069 Tool, Electric Cord Reel (15amp, 40’, 12awg) $104.01 

1-60-1000 Tool, Hub Puller (Center and Stand Offs) Sell: 1-60-A1000 $99.86 

3-96-0010 Tool, Hydraulic Brake Bleeder One Man $17.84 

#3-96-0031, chain 

alignment tool 

3-96-0006 Tool, Ignition Tester $12.23 

3-96-0013 Tool, L-Handle 3/8 Drive (250mm) $17.50 

3-96-0014 Tool, L-Handle 3/8 Mini Drive (195mm) $17.05 

#3-96-0019, master link 

pliers, 

3-96-0015 Tool, L-Handle 1/4 Drive (250mm) $15.37 

3-96-0016 Tool, L-Handle 1/4 Mini Drive (195mm) $15.37 

3-96-0001 Tool, Rotor & Sprocket Holder $38.04 

2-70-0076 Tool, Spanner Wrench (MTW or TPG Gearbox) $53.00 

1-60-0192 Tool, Sprocket Alignment $11.17 

2-60-0123 Tool, Super Tube Valve Tightener (Plastic Style) $5.56 

SHOP SUPPLIES 


#3-96-0018, chain riveting tool, 

3-96-0002 Tool, T-Handle Metric Set $78.43 

3-96-0003 Tool, T-Handle Standard Set $106.48 

3-96-0004 Tool, T-Handle 1/4” Drive $11.11 

3-96-0005 Tool, T-Handle 3/8” Drive $11.78 

3-96-0024 Gauge, Low Pressure 0-15 (Super Tube & Poly Tube(Motion Pro) $95.00 

#3-96-0006, ignition tester, 

#3-96-0010, hydraulic 

brake bleeder, 

#3-96-0009, compression tester, 

1/4" mini L handle #3-96-0016 

1/4" L handle drive #3-96-0015 

3/8" mini L handle #3-96-0014 

3/8" L handle drive #3-96-0013 

T-handle drives in 1/4" & 3/8" 

1/4" #3-96-0004 

3/8" #3-96-0005 

#3-96-0024 


OIL CHANGING SUPPLIES 


011060 Oil Extractor, 6.3 Gal (W/Probes) Air $689.99 

1-60-0130 Oil Extractor, FPX 20L (5.2 gal) 6mm & 8mm Probes Gear Pump $585.00 

5958434 07999-ZW7-000AH Oil Extractor, 6.5 litr $110.15 

011050 Oil Dispenser, 6.3 Gal (W/LD250 Non-Preset Meter) $576.00 

1-60-A0141 Oil Extractor Assy, FPX 5.2Gal W/Probes Drain Kit Ready $585.00 

1-60-A0140 Oil Dispenser, 6.3 Gal W/Meter Drain Kit Ready $576.00 

OIL CHANGE KITS SAVE TIME & MONEY! 

YOUR GO KARTS LARGEST EXPENSES: 

Tires, engines & clutches. 

#1-60-0130 

NUMBER ONE REASON ENGINES AND CLUTCHES FAIL. 

The lack of consistent oil changes. Oil should be changed every 50 to 100 hours 

(commercial/go kart) use. That’s once a week for some FEC’s! 

SHOP SUPPLIES 


#1-60-A0140 

Do a complete oil change in less than a minute with no need to remove kart body or 

dipsticks. Change oil in 30 karts in 1 hour; ask your mechanic how long it takes now. Will 

work on most karts. 

AIR OPERATED OIL DISPENSER 

Air operated oil dispenser makes oil changes fast and clean. This dispenser comes equipped 

with a 6.3 gallon tank and digital quart calibration valve meter with flex spout. Flow can 

be set at 1-26 quarts per minute with a typical accuracy of +/- 1.0% and repeatability of 

+/- 0.3%. Batteries are replaceable and retain calibration information in case of power loss. 

Shuts off at the tip and eliminates spillage. This unit is accurate down to .100 Qts. Accurate, 

clean, used at the factory! 

CHECK OUT THE NEW FPX ELECTRIC OPERATED OIL EXTRACTOR: 

Industrial quality 

Operator can safely and quickly remove hot oil from any small engine. 

Waste oil is evacuated either through dipstick probes or Xpress change kit. 

No air needed to operate. 

Fast and accurate. 

GREAT PRODUCT FOR SMALLER FLEETS! 

Requires just 4 to 15 strokes to create a powerful vacuum. 

The integrated container (6.5 liters) then neatly captures the 

oil, preventing messy spills. The calibrated walls allow easy 

measurement of the oil extracted. A built-in float switch 

automatically stops extraction as soon as capacity is reached. 

A pour spout facilitates emptying. The Big PELA is a durable, 

maintenance-free unit. It is ideal for professional use. 

#011060 

#5958434, Hand operated 

oil extractor 

See page 13 for more products and 

information about oil changing drain kits. 

74 


GAS CADDY 


00223 Gas Caddy, Complete 30 Gal. $565.00 

3-60-0066 Pump, Gas Caddy (Blackmer) Optional for Gas Caddy One Way Fl $209.59 

C200 Pump, Gas Caddy $202.00 

C203 Gas Caddy, Vent Dome Assy $28.65 

C204 Hose, Assembly (Gas Caddy) $58.14 

C205 Gas Caddy, Gauge Assembly $63.21 

C206 Gas Caddy, Ground Wire Assembly $21.45 

C207 Gas Caddy, Filler Neck $16.07 

3-60-0047 Gas Caddy, Wheel Kit (two wheels per kit) $37.99 

C618 Gas Caddy, Cap $12.24 

C629 Gas Caddy, O-Ring (Large) $4.55 

002172 Gas Caddy, Repair Kit For Tank Gauge $33.66 

3-60-0071 Gas Caddy, Wheel Retaining Clip $1.12 

#00223 

GAS CADDY 

UL-approved, 2-way, heavy-duty rotary pump. 

Non-conductive aluminum feet for proper grounding and spark resistance. 

8ft. suction/discharge hose with anti-static ground. 

2in. fill neck for safe addition of outside fuel/fluids. 

Fill level gauge shows tank levels. 

10in. heavy-duty steel wheels with semi-pneumatic tires. 

30 gallons capacity. 

Durable, powder-coat finish. 

SHOP SUPPLIES 


#C200 

#002172 

Note: Nozzle is not included with Gas Caddy 


MAINTENANCE & GROUND TOOLS 


3-00-0006 Blower, Track Blaster 9HP Honda F902H Force 2 $1,629.99 

3-00-0006 Blower, Track Blaster 16hp 2400cfm Call 

9-60-0010 Pressure, Washer GX200 2900 PSI $719.99 

9-60-0011 Pressure, Washer GX270 3500 PSI $1,049.99 

#3-60-0010, pressure 

washer 

The Track Blaster 

IMAGINE CLEANING AND DRYING YOUR GO KART TRACK IN THE TIME IT TAKES TO WALK IT. 

WELL, NOW YOU CAN WITH THE TRACK BLASTER FROM FPX! 

GENERAL PARK 

ACCESSORIES 

We offer the most powerful walk-behind blower on the market today. The hurricane-force wind is created by a Honda 13 hp or 

Honda/Robin 9hp commercial grade engine. The Track Blaster is capable of producing wind speeds of up to 180mph and over 

2,400cfm which allows you to get the job done fast. 

The Track Blaster is easy to start and operate. Its large 15-inch pneumatic rear tires make pushing it a breeze. There is also a 

self-propelled version for tracks with bridges. 

The Track Blaster is great for all your cleaning and drying needs. Use it on your track, parking lots, or your landscape. With a 

throttle control arm, you can adjust the wind speed to fit any of these cleaning tasks. 

Order yours today, and don’t let the rain shut you down. 

When comparing the blowing force of FPX Track Blaster blowers to other blowers on the market that claim more “CFM”, Track 

Blaster blowers move debris farther. Here’s the rest of the story: 

A ceiling fan puts out a lot of CFM but does little work. 

It’s the combination of CFM and Pressure that does work. 

For example: 

- Pneumatics (cfm x psi = work) 

- Hydraulics (flow x pressure = work) 

The combination of CFM and Track Blasters’ necked-down discharge creates the highest pressure and discharge velocity in 

the industry, which produces the most work when compared to other blowers on the market. 

76 


SIGNS 


#00475, Attention, No Insurance sign 

KITKARTSIGN Sign Package, Go-Kart Start Up $598.94 

00475 Sign, ATTENTION No Liability Insurance 24x8 $41.39 

00476 Sign, ATTENTION No Liability Insurance 60x24 $277.96 

00500 Sign, Attn: Stay Out (12 x 9) $45.00 

00502 Sign, Attn: For Your Safety 14x7 $16.49 

00504 Sign, Attn: Helmets Must Be Worn In All Batting Cages $303.21 

#00502, For your safety... 

00483 Sign, Absolutely No Alcohlic $121.89 

004830 Sign, Absolutely No Bump 50 x 18 (black on white) $299.00 

00510 Sign, Absolutely No Food Or Drink 16x9 $66.37 

004950 Sign, Ball Near Concrete Edge $28.84 

00484 Sign, Bumper Boat Rules, Please Read Before Riding 36x24 $123.71 

00517 Sign, Bumper Boat Rules (24x36) $177.15 

00493 Sign, Caution - Due To The Nature Of 18x12 $69.74 

#00483, NO Alcohol 

00478 Sign, Entrance Only 17 3/4 x 12 $36.64 

004780 Sign, Entrance 16 x 8 $87.51 

00474 Sign, Go-Karts Ride At Your Own Risk (44 x 9) $78.43 

00474S Sign, Go-Karts Ride At Own Risk (Spanish) 44x9 $65.97 

004802 Sign, Go-Kart Track Rules (Please Read Before Riding) $49.26 

004802G Sign, Go-Kart Track Rules $52.19 

#00510 

00482 Sign, Go-Kart Instructions $72.82 

J&J signs are made of tough, weather-resistant fiberglass and are made to withstand 

the abuse of day-to-day use at entertainment centers. All signs have the text 

laminated inside to prevent scratching. 

#00493 

SIGNS & DECALS 

#004830 

#004780 

#00516 

#00517 

phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899 parts@funpartsxpress.com www.funpartsxpress.com 

77

SIGNS 

00488SGL Sign, Go-Kart Track Rules Single Karts $72.82 

00512 Sign, Golf Balls Lost 12x8 $28.61 

00516 Sign, Go-Kart Rules (24x36) Rev:1 $204.00 

00516-S Sign, Go-Kart Rules (24x36) Spanish $185.47 

#00506 

00515 Sign, Long Hair 16x9 $69.74 

00480 Sign, No Smoking This Area (14 x 10) $39.99 

00481 Sign, No Smoking In This Area 14x10 $35.77 

00506 Sign, No One Under 18 Allowed 12x12 $22.66 

00508 Sign, No Bicycles Or Skateboards 18x10 $47.07 

#00508 

00492 Sign, Reward Given For Information 18x12 $36.64 

004810 Sign, Span. No Smoking In This Area 14x10 $21.43 

00487 Sign, Slick Track Rules 24x18 $52.19 

00505 Sign, Swing Bats In Cages Only (16 x 7) $20.64 

1-60-0114 Sign, Stop and Slow Paddle 18” Plastic $99.99 

00509 Sign, Thank You For Not Smoking $24.81 

00513 Sign, Truancy - In Cooperation With The Police 4x4 $11.00 

#00507 

00514 Sign, Truancy - In Cooperation With The Police 8x8 $16.61 

00496 Sign, Warning- Drivers Will Be Held 24x14 $95.37 

00507 Sign, Keep Hands Inside Boats 12x8 $28.56 


1-60-0282 Decal, Warning Hair/Rotating Parts 8.5” x 11” $7.99 

#00496 

IMPORTANT 

Worn or damaged signs & warning decals should always be replaced. Do not put into 

service any go kart or bumper boat that does not have legible warning decals. 


#00515 

QUEUE LINE WARNING TO BE PROMINENTLY DISPLAYED SO GUESTS 

ARE AWARE OF POTENTIAL HAZARDS. 

It is strongly urged that go kart operators adopt the “graphic” warning advising 

guests of the potential hazards and dangers of long hair, loose clothing and 

the proximity to rotating machinery. Guest with hair longer than shoulder 

length MUST be secured above shoulder. 

Rubber bands, hair pins etc, should be provided for this purpose. Particular 

attention must be paid to items of loose clothing such as draw strings that 

could become entangled in moving parts. If a guest refuses to comply, they 

should not be allowed to operate the kart. 

USE DECAL #1-60-0288 on each go kart where it is easily read by each patron. 

USE DECAL #1-60-0282 in the pit area where it is easily read by each patron. 

WARNING! 

Go-karts have rotating parts. 

For your safety, longer hair 

must be secured above 

the shoulder and any 

personal items (clothing, 

jewelry, etc) must be 

secured and contained 

within the seating area. 

Serious injury or 

death could occur! 

#1-60-0282 

78 


DECALS - BUMPER BOAT -SAFETY & WARNING 


00169 Decal, Warning-Keep Hands And Feet In Boat At All Time $1.99 

00170 Decal, Warning-Never Stand Up While Boat Is Operating $1.41 

001717 Decal, Warning-Gas Bumper Boat Motor $1.41 

2-60-0025 Decal, Warning-Gas Bumper Boat Motor BF2D $1.41 

2-40-0006 Decal, Weight Limit 450LB $2.24 

#00169 

#2-60-0025 

#2-40-0006 

#00170 

#001717 

DECALS - BUMPER BOAT - GENERAL 


#00168 

00168 Decal, Waterbug Top Front $6.73 

0097101 Decal, “GO” Button EBB $2.13 

00981 Decal, Gas & Brake 4.25” x 1” $1.89 

00156 Decal, “Stars & Stripes” $13.92 

0097102 Decal, “SQUIRT” Button EBB $2.13 

009815 Decal, Stop & Go 4.25” x 1” $1.41 

001686 Decal, Blaster Boat Motor 8” $13.46 

001687 Decal, Blaster Boat Motor 4” $6.73 

001688 Decal, Blaster Boat Hull 7.5” $7.99 

#0097101 

#0097102 

2-40-0001 Decal, Blaster Boat Motor Arrow $4.74 

2-60-0071 Decal, Squirter Master Blaster 8” $12.50 

2-60-0082 Decal, Squirter Master Blaster Coin/Minutes 4” x 6” $9.69 


#001686 

#2-60-0071 

#001688 #00156 

#2-40-0001 #2-60-0082 


79

DECALS - GO KART - SAFETY & WARNING 


00980 Decal, Warning-Keep Hands And Arms in Car At All 6.75” x 3” $1.99 

#00980 

00980S Decal, Spanish Warning-Keep Hands And Arms In Car 6.75” x 3” $1.41 

001711 Decal, Warning Gasoline 5.25” x 3.25” $1.99 

001715 Decal, Important Information 6” x 3.50” $1.16 

1-60-0020-EAGLE Decal, Eagle Dash Hair longer shoulder, Brake Gas 6” x 5.25” $6.99 

#00980S 

1-60-0020 Decal, F-22 Dash Danger Hair Longer than shouldr 4.25” x 2.5 $2.99 

001712R Decal, Warning (Yellow Safety Procedures) GoKarts 6.75” x 3” $2.75 

001712S Decal, Spanish (Yellow) Warning-Driver Must Be 148cm Tal $2.36 

001716 Decal, Warning “Check Axle” $1.41 

00180 Decal, Warning Engine Exhaust (California) 3.75” x 2” $1.50 

1-60-0282 Decal, Warning Hair/Rotating Parts 8.5” x 11” $7.99 

#001711 


00978 Decal, Remain Seated Until (RED) 5” $1.99 

1-40-0123 Decal, “Remain Seated” Red 3” Falcon $12.24 

00978S Decal, Spanish Remain Seated Til All Cars Stop 5” $1.41 

00979S Decal, Spanish No Bumping Allowed 5” $3.58 

00981S Decal, Spanish Brake & Gas $1.41 

#001715 

001713 Decal, Use Dot 3 or 4 2.50” x 3.75” $1.50 

009810 Decal, Use Dot 4 Brake Fluid $1.41 

009811 Decal, Use Dot 5 Brake Fluid $1.41 

1-40-0122 Decal, “No Bumping” Blue 3” Falcon $12.24 

00981 Decal, Gas & Brake 4.25” x 1” $1.89 

009815 Decal, Stop & Go 4.25” x 1” $1.41 


#1-60-0020-EAGLE 

#00981 

#009815 

#00180 

#1-60-0020 #001716 

#001713 

#009810 

#00979 #00979S 

#001712R #001712S 

#009811 

#00978 #00978S 

80 


DOUBLE EAGLE 

#1-40-0114 

EAGLE 

#1-40-0116 

DECALS - FOR EAGLE & F-22 WINGS 


1-40-0130 Decal, Number 0 Eagle, White 3 1/4” x 3 7/8” $3.37 






F-22 

#1-40-0164 





1-40-0114 Decal, Name Double Eagle Black (Small) $5.61 

1-40-0113 Decal, Name Double Eagle White (Small) $7.99 

1-40-0116 Decal, Name Eagle Black (Small) $5.61 

1-40-0115 Decal, Name Eagle White (Small) $6.99 

3-1/4”x3-7/8” white numbers 

1-40-0164 Decal, F22 Wing $3.99 

DECALS - HOOD 

#1-40-0106 


1-40-0106 Decal, Name King Scorpion Black (Large) $6.73 

1-40-0105 Decal, Name King Scorpion White (Large) $6.73 

#1-40-0104 

1-40-0104 Decal, Name Scorpion Black (Large) $6.73 

1-40-0103 Decal, Name Scorpion White (Large) $6.73 

1-40-0108 Decal, Name Sidekick Black (Large) $5.61 

#1-40-0108 

1-40-0107 Decal, Name Sidekick White (Large) $6.50 

1-40-0102 Decal, Name Can Am Black (Large) $6.73 

#1-40-0102 

#1-40-0144 

1-40-0101 Decal, Name Can Am White (Large) $6.73 

DECALS - SIDE 


1-40-0112 Decal, Name Sidewinder with Logo Black (Small) $5.61 

1-40-0111 Decal, Name Sidewinder with Logo White (Small) $6.50 

1-40-0144 Decal, Eagle, “Electric” Right Side “Eagle Head” $33.79 


#1-40-0143 

1-40-0143 Decal, Eagle, “Electric” Left Side “Eagle Head” $33.79 

1-40-0140 Decal, Eagle, “Red, White, Blue” Left Side “Eagle Head” $49.37 

1-40-0141 Decal, Eagle, “Red, White, Blue” Right Side “Eagle Head” $49.37 

Sidewinder 

#1-40-0112 #1-40-0141 #1-40-0140 


81

DECALS - NUMBERS, 7” 


1-40-0061 Decal, Number 1 Stock-Car 7” Black with White Outline(Right) $5.61 

1-40-0062 Decal, Number 1 Stock-Car 7” Black with White Outline (Left) $5.61 

1-40-0063 Decal, Number 1 Stock-Car 7” White with Black Outline(Right) $5.61 

1-40-0064 Decal, Number 1 Stock-Car 7” White with Black Outline (Left) $5.61 





HEAVY-DUTY NUMBERS WITH 

UV PROTECTION. 

WHITE WITH BLACK OUTLINE 

OR BLACK WITH WHITE 

OUTLINE. 

Try these new, heavy-dutythickness 

decals with UV 

protection for long-lasting color 

and fade resistance. These “Tuff- 

Cover” laminate decals have 

nine years of test data proving 

the steadfastness against color 

fading. These decals are an 8 

mil film with velvet texture that 

have double the UV inhibitors of 

most film decals. These are the 

most impressive decals we’ve 

ever encountered. We think you’ll 

be pleased with their look and 

performance as well. 


































82 


All parts guides & shop manuals 

are posted on line except for 

Honda manuals. Honda manuals 

are copyrighted material and 

cannot be reproduced. 

http://funpartsxpress.com/ 

partsbook.htm 

MANUALS - OWNERS 


06316630 Manual, Owners #3188300 G150 & G200 $10.94 

26535411 Manual, Owners (BF2A) 31ZV0600 $19.39 

KDZ3514 Manual, Owners “Kidzkart” $2.04 

44757861 Manual, Owners (BF2AM) Spanish $14.00 

45757410 Manual, Owners, GX240, GX270, GX340, GX390 $19.68 

52513920 Manual, Owners 31ZH7621 (GX120-GX160-GX200) $15.37 

6050066 Manual, Owners 31ZW6600 BF2D $11.83 

MANUALS - SERVICE 


SERV-KART-2014 Manual, Service J&J Go-Kart 2014 (Free Download) $0.00 

SERV-EBB-2014 Manual, Service J&J EBB 2014 (Free Download) $0.00 

SERV-FALCON2015 Manual, Service J&J Falcon 2015 (Free Download) $0.00 

MANUALS - PARTS GUIDES 


1-60-0057 Parts Guide, Stinger $0.00 

1-60-0058 Parts Guide, KidzKart $0.00 

1-60-0059 Parts Guide, Go-Kart $0.00 


Scan the QR code to open a link 

to the manuals on our website or 

visit our website at: 

http://www.jjamusements. 

com/service-and-technicalinformation/ 

1-60-0061 Parts Guide, GX240 & GX270 RA2 (Free Download) $0.00 

2-60-0027 Parts Guide, Blaster Boats (Free Download Online) $0.00 

2-60-0028 Parts Guide, BF2A $0.00 

2-60-0029 Parts Guide, BF2D $0.00 

MANUALS - SHOP 


49332890 Manual, Shop 61ZH910 (GX270/340-240/390K1) $48.03 

50300690 Manual, Shop 61ZH700YE3 (GX160/200) $48.56 

6142129 Manual, Shop 61ZW600E3 (BF2D BF2.3D) $62.99 

61Z5F00E3 Manual, Shop 61Z5F00E3 (GX270/340-240/390K1)UT2 $50.00 

48223751 Manual, Shop 61ZV010 (BF2A) $38.68 

MANUALS & 

VIDEOS 


VIDEOS, DVD’S & MUCH MORE 

VIDEO 


1-60-0029 Video, GBA Go-Kart GBA TS #5 $163.20 

1-60-0105 Video, Pre-Ride Briefing Go-Kart (DVD) $56.10 

1-60-0106 Video, Operations Go-Kart (DVD) $56.00 

1-60-0119 Video, Kartrol How To (DVD) 18min $56.10 

2-60-0066 Video, Operations Bumper Boats (DVD) $51.00 

K0001 Video, Honda GX series Maintenance & Repair Training (IR $199.72 

K0003 Video, GBA The Americans With Disabilities Act (3 W/Manu $300.90 

K0004 Video, GBA Fun Centers Training System (5 video & manual) $550.00 

T0800 Video, Honda Marine Outboard Motor Pre-Delivery Inspecti $11.22 

T0893 Video, Service Go-Kart Service “Preventive Maintenance” (DVD $53.86 

T0894 Video, Service Bumper Boat Service & Setup (DVD) $48.96 

BE SURE TO VISIT OUR WEBSITE TO VIEW MORE INFORMATIVE VIDEOS OF PRODUCTS, MAINTENANCE, 

OPERATIONS AND MORE. 

Just go to jjamusements.com, select the customer service tab, then videos. 

MANUALS & 

VIDEOS 

84 


COMING SOON! 

SUPER TUBE TECHNOLOGY FOR YOUR BUMPER CAR. That’s right, we’ve listened to your repeated requests to introduce 

a tough replacement tube for bumper cars. Hey, we don’t make bumper cars but we make the best bumper boat tube in the 

industry and applied that knowledge in the design of this tube. 

We’ve been busy testing prototypes since January 2015 and are nearing the debut of the final product. Come see the unveiling 

at IAAPA 2015 in Orlando, Florida. 


85

J&J Amusements began as nothing more than something fun between twin brothers in 1957 who decided to open the first 

miniature golf center in Utah. 

Their love of amusements moved them to begin building some of the first fun centers and amusement parks throughout 

southern and central California. They would build rides and try things, all with the goal of providing more fun to those who 

visited their centers. 

When they invented the bumper boat in 1975, they were in love. They patented the bumper boat in the US and became US 

Coast Guard Certified. In 1990 J&J brought on new partners and began manufacturing concession go karts. And just like the 

bumper boat, J&J’s line of innovative and durable go karts took off. 

In 1993, the company was moved from southern California to Salem, Oregon. 

Today, J&J Amusements’ family of go kart and bumper boat attractions allows us to meet the evolving needs of the amusement 

industry with our safe and durable amusement products. We are 100% owned by employees – most of whom have been with 

the company 10+ years – who provide master planning, custom design, manufacturing and theming for complete amusement 

solutions. 

For 40 years, J&J Amusements has been manufacturing fun and entertainment attractions that are loved by the entire family. At 

J&J, we believe one of our advantages is the understanding that at the end of the day, we’re creating fun. 

Each go kart and bumper boat we manufacture will see sunshine and rain, hear laughter and play, and be enjoyed by families 

across the world. Our products must be built durable to last and safe to take care of each passenger they hold. 

86 


IAAPA works on behalf of family entertainment centers just like yours 24/7/365. Whether you are interested in learning 

opportunities that are easy to access, exclusive events and conferences, or special communications designed specifically for the FEC 

community, IAAPA has the answers you need to stay safe and competitive, grow your operations, and boost your bottom line. 

WORLD-CLASS EDUCATION 

BUILD A STRONGER NETWORK 

IAAPA Webinars –This members-only, free benefit offers monthly online 

learning programs that cover a full range of topics critical to FECs. 

Rookies and Newcomers: FEC 101 at IAAPA Attractions Expo – Designed for 

new operators, this program shows you how to safely and responsibly 

increase efficiency. 

Institute for Executive Education – This high-level learning opportunity is 

your connection to a better career. 

CRITICAL COMMUNICATION AND INFORMATION 

FunExtra – This bi-monthly e-newsletter, exclusively for IAAPA FEC members, 

is filled with articles and information to help you grow your business. 

IAAPA Benchmark Study: Family Entertainment Centers – Free for IAAPA 

members, this study offers valuable insight and data about operating 

schedules, expenses, revenue, facility size, human resources, and much 

more. 

News Flash – For members only, this is a daily e-mail highlighting industry 

news from around the world. 

Funworld – IAAPA’s monthly magazine features articles focused on the 

industry at-large and FECs in general. 

IAAPA Bookstore – Access discounted training materials specifically written 

for FECs. 

IAAPA Expos – With Expos in Asia, Europe, and the United States, IAAPA 

offers hundreds of hours of seminars and access to the latest innovative 

products for your FEC business. 

FEC Annual Conference – Designed by FEC operators for FEC operators, this 

members-only conference is your annual opportunity to exchange with other 

operators eager to talk about what’s working for their businesses. 

Regional Networking Events – IAAPA is coming to a place near you! IAAPA 

Regional Networking Events are designed to give you the opportunity to 

meet other facility owners and operators, exchange ideas, and learn about 

new trends in the industry. Visit www.IAAPA.org for more information as 

they become available. 

SAFETY AND ADVOCACY 

Lobbying on Your Behalf – IAAPA is committed to protecting the interests of 

the industry. 

IAAPA Safety Institutes – The industry’s best safety experts share best 

practices from around the world. 

AIR ELITE – IAAPA’s endorsed insurance and risk management program for 

FECs, Britton Gallagher/AIR Insurance & Risk Services offers IAAPA FEC 

members quality insurance at competitive prices. 

GLOBAL NETWORK, LOCAL RESULTS 

For more information, contact 

Leslie Hutcheson 

1448 Duke Street • Alexandria, VA 22314 USA 

+1 703/299-5761 • Fax: +1 703/299-5761 

E-mail: lhutcheson@iaapa.org 

IAAPA is committed to providing members with real results. In addition to 

these great benefits, IAAPA members have access to our staff, including a 

dedicated FEC programs manager, available to answer your toughest FECrelated 

questions.

IAAPA CERTIFICATION 

The Mark of Professional Achievement in the Attractions Industry 

IAAPA 

Certification 

IAAPA’s new certification program helps set your career apart from others in the industry. Let your years of experience and professional development 

training work for you by earning one of IAAPA’s three professional designations: 

IAAPA Certified Attractions Manager (ICAM) 

IAAPA Certified Attractions Leader (ICAL) 

IAAPA Certified Attractions Executive (ICAE) 

FIVE REASONS TO EARN IAAPA CERTIFICATION 

Professional Advancement: Certified Attractions Professionals can use the designation as a competitive advantage when it comes to applying for 

positions or negotiating salaries. 

Recognition: As the premier industry recognition, IAAPA Certification distinguishes holders as career professionals who have demonstrated a high 

level of experience, skill and knowledge as well as a commitment professional development. 

Peer Acceptance: Holders of IAAPA Certification are immediately recognized by their peers as fellow professionals committed to the advancement 

of the profession and the global attractions industry. 

Personal Achievement: Being awarded an IAAPA Certification provides a sense of personal and individual achievement as an experienced and 

skilled professional. 

Commitment: Successful completion of the certification process conveys that the recipient is committed and goal-driven in their career. 

Path to IAAPA’s Certification 

Credit Hours 

Work Experience 

200 

Continue earning credit hours 

10 years experience in the industry with 

7 years experience at a leadership level, 

industry leadership position (served on 

IAAPA committee). 

Professional Development 


A minimum of 200 credit hours of recognized 

professional development training within 

10 years or ICAL plus 60 credit hours 

professional development training. 

140 

Continue earning credit hours 

5 years full time work experience. 

Minimum of 3 years experience in the 

attractions industry. 

2 years supervisory experience. 

Certified 

Attractions 

Executive 


60 


3 years full time work experience. 

1 year supervisory experience. 


60 credit hours of recognized professional 

development training earned within 5 years. 

140 credit hours within 7 years or ICAM 

plus 80 credit hours within 4 years. 

Certified 

Attractions 

Leader 

5 credit hours must be earned in each of 

5 education domains. 

Certified 

Attractions 

Manager 

Years of experience 

3 4 5 6 7 8 9 10 

To register go to www.iaapa.org//events-education/education/iaapa-certification to download a application.

Fax Order Form 

Photocopy this order form. If you wish to confi rm receipt call or e-mail: 

Phone:1-503-304-8899 or 1-800-854-3140 E-mail: parts@jjamusements.com 

Fax Anytime - Day or Night 

Toll Free (USA) 1-800-366-7505 

International 1-503-304-1899 

For the latest information visit www.funpartsxpress.com and www.jjamusements.com 

Date:_____________ Time:______AM/PM Customer #________________(Required for all orders) 

E-mail:______________________@_________________________________________ 

Bill to: ___________________________ 

___________________________ 

___________________________ 

___________________________ 

Ship to:__________________________ 

__________________________ 

__________________________ 

__________________________ 

Phone# ( ) Ext: Fax # ( ) 

PO# or Contact Name:____________________ 

Visa________ M/C_______ Discover______ AMEX______ Verfi cation Code__________ 

Card Number: 

Expires:__________ 

Name on card:_____________________________ Signature:_______________________ 

(Print name exactly as it appears on the credit card.) 

Ship via UPS 

(please one) 

UPS Ground (3-7 days) 

UPS Orange (3 days) 

UPS Blue (2 days) 

UPS Red (1 days) 

UPS Red Saturday (Select areas only) 

International 

1 

Part# Qty Description Price 

2 

3 

4 

5 

6 

7 

8 

9 

Special instructions: ______________________________________________________________ 

______________________________________________________________ 

______________________________________________________________

Fax Order Form 

Page 2 

Photocopy this order form. If you wish to confi rm receipt call or e-mail: 

Phone:1-503-304-8899 or 1-800-854-3140 E-mail: parts@jjamusements.com 

Fax Anytime - Day or Night 

Toll Free (USA) 1-800-366-7505 

International 1-503-304-1899 

For the latest information visit www.funpartsxpress.com and www.jjamusements.com 

Company Name:____________________________ Customer #___________________________ 

10 

Part# Qty Description Price 

11 

12 

13 

14 

15 

16 

17 

18 

19 

20 

21 

22 

23 

24 

25 

26 

27 

28 

29 

Double check all part numbers and descriptions before placing order. 

All prices are subject to change without prior notice. 

Parts guides are available on the internet. Get the latest news & updates: 

www.funpartsxpress.com or www.jjamusements.com 

Thank you for your order, your business is appreciated!

You as an operator and 

 

 

 

 

 

ment, we here at FPX 

 

manufacturer demand 

 

are proud to introduce 

rials. Constructed with 

 

 

 

welded seams (not glued) 

 

 

product to enter our 

and reinforced with seam 

 

Honda parts can 

 

 

 

maintain the original 

 

 

manufacture the 

 

clutch plates. 

with a scrim of 1000 denier. 

Bigfoot from the 

 

A wide wear strip is added 

ground up to be the 

 

 

best of the best. 

 

rough pool surfaces.

www.funpartsxpress.com 

USA AND CANADA: 

phone: 1-800-854-3140 

fax: 1-800-366-7505 

INTERNATIONAL: 

phone: 1-503-304-8899 

fax: 1-503-304-1899 

HEADQUARTERS: 

4897 Indian School Road NE, Suite 150 

97305-1126 USA 

TIRE DISTRIBUTION: 

East Coast 

Atlanta, Georgia 

Go Kart/Bumper Boat 2015 - Parts & Accessories 

ACCBOOK15

Fun Parts Xpress Catalog

Create successful ePaper yourself

Delete template?

Save as template?