ARCHITECTURAL BUILDERS HARDWARE CATALOG - Cal-Royal

More documents

Recommendations

Info

FULL MORTISESWING CLEAR HINGESUsed in hospitals or other institutional typebuildings. Swings door completely clear ofopening when door is opened 95°. Swing clearhinges are designed so that when the door isopened to 90 degrees, the door itself iscompletely out of the opening. 2-ball bearing isrecommended for average frequency doors while4-ball bearing for high frequency usage.ANSI Products StandardsCAL-ROYAL HINGES complies with ANSI A156.1 (Butts and Hinges),A156.7 (Template hinge dimensions), A156.17 (Self Closing Hinges and Pivots),A 156.18 (materials and Finishes).TYPES OF MATERIALSSteel – Durable, has great strength but is highly corrosive. Rusting will result if the material is used in an uncontrolledenvironment, like places near the sea where the atmosphere is salty. Steel is best to use in a stable containedsurroundings such as inside a building where the temperature and humidity are controlled. Steel hinges can be used onlisted fire rated or labeled door openings.Stainless Steel – This material is also durable and has great strength, but does not corrode like steel. This is best touse on highly corrosive areas. A 316 grade stainless steel or clear coat over 304L is recommended. Stainless steel canalso be polished to a satin or bright finish. Stainless steel hinges can also be used on listed fire rated or labeled dooropenings.Brass – Like stainless steel, brass is also non-corrosive and rust resistant. And although brass has less strengthcompared to steel and stainless steel, it is very decorative. It is often used in applications where appearance is takeninto consideration over strength as it can be polished and plated in various finishes. But due to its low melting point,brass may not be used on listed fire rated door openings.TYPES OF FINISHESAll steel and brass material hinges can be plated to match the available finishes that are listed in the AmericanNational Standards Institute or ANSI, standard ANSI/BHMA A156.18 Materials and Finishes.Hinges are available in Steel, Stainless Steel and Solid Brass base. Other sizes and finishes available upon request.Cal-Royal Part #SizeLength ofJoint( Inches )MinimumClearanceRequired,Dimension AGauge ofMetalTypeNo ofHolesMachineScrew SizeWoodScrew SizeFinishesInner BoxQuantityPieces/CaseBB350(2-Ball Bearing)STANDARD WEIGHT3 ½” 2 ⅛” (54mm) .123 SC 6 10-24 x ½10 X 1F.H.US15, US26D, US4,US3, US26, US10B2 Ea. 50BB35058(2-Ball Bearing)⅝” round cornerSTANDARD WEIGHTBB400(2-Ball Bearing)STANDARD WEIGHTBB40058(2-Ball Bearing)⅝” round cornerSTANDARD WEIGHT3 ½” 2 ⅛” (54mm) .123 RC 6 10-24 x ½4” 2 ⅛” (54mm) .130 SC 8 12-24 x ½4” 2 ⅛” (54mm) .130 RC 8 12-24 x ½10 X 1F.H.12 x 1F.H.12 x 1F.H.US15, US26D, US4,US3, US26, US10BUS15, US26D, US4,US3, US26, US10BUS15, US26D, US4,US3, US26, US10B2 Ea. 502 Ea. 502 Ea. 50CAL-ROYAL PRODUCTS , INC. 6605 Flotilla Street, City of Commerce, California 90040 U.S.A.Phone: (323) 888-6601; (800) 876-9258 ● Fax: (323) 888-6699; (800)222-3316Email: sales@cal-royal.com ● Website: www.cal-royal.com
ARCHITECTURAL HINGE COMPARISON CHARTTYPE CAL-ROYAL ANSI HAGER STANLEY MCKINNEY PBBSteel /Stainless2 BallBearingsBB55 5” x 5”BB545 5” x 4½”BB54 5” x 4”BB31 4½” x 4½”BB454 4½” x 4”BBSC56 4” x 4”BBRC45 4” x 4” ( ¼” Rad. )BBSC77 3½” x 3½”Stainless Steel, add 32D after part#A8112A5112(StainlessSteel)BB1279BB1191(StainlessSteel)FBB179FBB191(StainlessSteel)TB2714TB2314(StainlessSteel)BB81BB51(StainlessSteel)Steel /StainlessPlain BearingTBH30 4½” x 4½”TBH454 4½” x 4”TBHSC55 4” x 4”TBHRC44 4” x 4” ( ¼” Rad. )TBHSC77 3½” x 3½”TBHRC66 3½” x 3½” (¼” Rad. )Stainless Steel, add 32D after part#A8133A5133(StainlessSteel)12791191(StainlessSteel)F179F191(StainlessSteel)T2714T2314(StainlessSteel)PB81PB51(StainlessSteel)Brass, 2 BallBearingsBrass, PlainBearingSteel, HalfMortise, 2BallBearingsSteel, HalfSurface, 2BallBearingsSteel, SwingClear, 2 BallBearingsSteel,BearingConcealedSBBB31 4½” x 4½” A2112 BB1191 FBB191 TB2314 BB21SBTBH30 4½” x 4½” A2133 1191 F191 T2314 PB21HMBB4100 4½” A8212 BB1129 FBB167 TB2774 BB82Stainless Steel, add 32D after part #HSBB4900 4½” A8412 BB1173 FBB173 TB2772 BB84Stainless Steel, add 32D after part #BB600 4½” A8122 BB1260 FBB248 TB2895 SC81BB2200 4½” x 4½” A8112 BB700 CB1900 TA714 CB81Stainless Steel, add 32D after part #“UL” SpringHinge,Commercial“UL” SpringHinge,Commercial /ResidentialSH140SH4544½” x 4½”4½” x 4”Stainless Steel, add 32D after part #SH4458R 4” x 4”, (⅝” Rad. )SH44R 4” x 4”, (¼” Rad.)SH35R 3½” x 3½” (¼” Rad. )SH3558R 3½” x 3½” (⅝” Rad. )K8107-IF 1250 2060 1502 SP81K8107IF 1251 2060 1502 RS81Steel, 4 BallBearings,Heavy GaugeBB5210 5” x 4½” A8111 BB1168 FBB168 T4B3786 4B81BB5254 5” x 4” A5111 BB1199 FBB199 T4B3386 4B51BB5200 4½” x 4½” (Stainless (Stainless (Stainless (Stainless (StainlessBB52454 4½” x 4” Steel) Steel) Steel) Steel) Steel)Stainless Steel, add 32D after part #◊◊◊ All hinges above are available in steel, brass and stainless steel. Brass base prefix “SB” before part #. Stainless steeladd US32D after part #. Consult factory for more information on hinge comparisons not shown.116605 Flotilla St. Commerce, CA 90040 USATel: (323) 888-6601 ♦ Fax: (323) 888-6699Website: www.cal-royal.com ♦ Email: sales@cal-royal.com
Page 1:
ARCHITECTURAL BUILDERSHARDWARECATAL
Page 4 and 5:
PIONEER SERIES GRADE (2) CYLINDRICA
Page 6 and 7:
EXIT DEVICES9800 GRADE (1) SERIESSI
Page 8 and 9:
June 1, 2011To Whom It may Concern,
Page 10 and 11:
As most projects covered by the BA
Page 13:
CAL-ROYAL Products, Inc.is nowFlori
Page 16 and 17:
CARE FOR CAL-ROYAL PRODUCTSMERCHAND
Page 18 and 19:
CARE FOR CAL-ROYAL PRODUCTSotherwis
Page 20 and 21:
Cal-Royal Products, Inc.INDEX TO US
Page 22 and 23:
Company NameCAL--ROYAL PRODUCTS,, I
Page 25 and 26:
CAL-ROYAL’S FINEST HYDRAULIC DOOR
Page 27 and 28:
* SAME HOLE PATTERN AS LCN 4040/404
Page 29 and 30:
CR801S CR801S CR801SPRING POWERADJU
Page 31 and 32:
LifetimeWarranty300 SeriesANSI Grad
Page 33 and 34:
* CAN BE USED FOR RETROFIT OF NORTO
Page 35:
STANDARD DUTY COMMERCIAL HYDRAULIC
Page 39 and 40:
Meets ADA requirementsSpecially des
Page 41 and 42:
CR6000 SERIESDIGITAL TOUCH SCREEN D
Page 43 and 44:
DIGITAL TOUCHPAD LOCKFOR RESIDENTIA
Page 45 and 46:
DOOR AND FRAME HANDING CHARTSINGLE
Page 47 and 48:
UL-LISTEDUL10C, UBC 7-2-1997Availab
Page 49 and 50:
TRIMS & FINISHESSECTIONALITEMRoseLe
Page 51 and 52:
OutsideInsideREFER TO PRICELISTFOR
Page 53 and 54:
REFER TO PRICELISTFOR STOCK FINISHE
Page 55 and 56:
Electrically Locked FS (Fail Safe)N
Page 57 and 58:
GENESYS SERIES FINISHES AND FUNCTIO
Page 59 and 60:
GENESYS SERIES FINISHES AND FUNCTIO
Page 61 and 62:
CALYPSO CAL SERIES FINISHES AND FUN
Page 63 and 64:
OMEGA GRB SERIES FINISHES AND FUNCT
Page 65 and 66:
PIONEER SL SERIES FINISHES AND FUNC
Page 67 and 68:
COMMANDER SERIES FINISHES AND FUNCT
Page 69 and 70:
EXPLORER XP SERIES FINISHES AND FUN
Page 71 and 72:
CHALLENGER SERIES FINISHES AND FUNC
Page 73 and 74:
TUSCANY “TUSL” SERIES FINISHES
Page 75 and 76: BARRINGTON BA SERIES FINISHES AND F
Page 77 and 78: COLUMBUS SERIES FINISHES AND FUNCTI
Page 79 and 80: HIL SERIES FINISHES, FUNCTIONS AND
Page 81 and 82: JHIL SERIES FINISHES, FUNCTIONS AND
Page 84 and 85: CRB800 SERIES GRADE 1 HEAVY DUTY DE
Page 86 and 87: T300 MAXIMUM SECURITY HEAVY DUTY DE
Page 88 and 89: T400 SERIESHEAVY DUTY DEADBOLTANSI
Page 90 and 91: CB160 / GL160 SERIESANSI A156.5 GRA
Page 92 and 93: T220 / GL220 SERIESANSI A156.5 GRAD
Page 94 and 95: LSD SERIESANSI A156.2 GRADE 3STANDA
Page 96 and 97: RIM AND MORTISE CYLINDERS6 PIN SCHL
Page 98 and 99: The CRP Securities High Security Ke
Page 100 and 101: SMALL FORMAT INTERCHANGEABLE CORE (
Page 102 and 103: KEY BLANKS AND CONTROL KEYSITEM COD
Page 104 and 105: ESQUIRE DESIGN“ESQ” SERIES15/8
Page 106 and 107: OPTIONALU LCHELSIE SERIES TUBULAR L
Page 108 and 109: ADATHUMBTURNOPTIONALU LCHELSIE SERI
Page 110 and 111: 3 HOUR FIRE RATEDADA 4-3/16”4-11
Page 112: HINGES
Page 116 and 117: BASIC INFORMATIONTypes of Hinges:Fu
Page 118 and 119: BASIC INFORMATIONARCHITECTURAL HING
Page 120 and 121: HINGESFULL MORTISE TYPE HINGES ●
Page 122 and 123: HINGESSPRING HINGES (Commercial)Ful
Page 124 and 125: HINGES¼” RadiusRESIDENTIAL WEIGH
Page 128 and 129: ARCHITECTURAL HINGE COMPARISON CHAR
Page 130 and 131: FULL MORTISE TEMPLATE HINGESBall Be
Page 132: FULL MORTISE REVERSE ACTIONSpring H
Page 135 and 136: Continuous Geared HingesDimensionin
Page 137 and 138: Continuous Geared HingesConcealed /
Page 139 and 140: Continuous Geared HingesHalf Surfac
Page 141: EXIT DEVICES
Page 144 and 145: 7700 & F7700 SeriesGrade 1 Rim Type
Page 146 and 147: LBR 7760 & F7760 SeriesGrade 1 Vert
Page 148 and 149: 7700 Series Delayed Egress ModelsFo
Page 150 and 151: Trim SelectionLEVER DESIGNNon-hande
Page 152 and 153: Trim SelectionPULL DESIGN7700 NLIC7
Page 154 and 155: (ELR) Electrical Latch RetractionOu
Page 156 and 157: POWER SUPPLIES FOR ELECTRIFIED EXIT
Page 158 and 159: WCVR7700 & FWCVR7700 SeriesOptional
Page 160 and 161: MR7700 and FMR7700 SeriesGrade 1 Mo
Page 162 and 163: GLS7700 SeriesGrade 1 Rim Type, Nar
Page 164 and 165: Trim SelectionESCUTCHEON LEVER DESI
Page 166 and 167: Strikes & AccessoriesStrikes for us
Page 168 and 169: 7700 & F7700 Rim Type and Fire Exit
Page 171 and 172: 9800 & F9800 Rim Type Panic and Fir
Page 173 and 174: 9860 & F9860 SeriesGrade 1 Vertical
Page 175 and 176: Alarm Exit HardwareRim Type Exit De
Page 177 and 178:
Trim SelectionESCUTCHEON LEVER DESI
Page 179 and 180:
Electrified Lever TrimCal-Royal’s
Page 181 and 182:
Heavyduty Keyless LocksMECHANICAL C
Page 183 and 184:
MCVR9800 & FMCVR9800 SeriesOptional
Page 185 and 186:
MCVR9800, FMCVR9800, WCVR9800 & FWC
Page 187 and 188:
MR9800 and FMR9800Grade 1 Mortise L
Page 189 and 190:
GLSCVR9800 SeriesGrade 1 Concealed
Page 191 and 192:
Trim SelectionPULL DESIGN - FOR GLS
Page 193 and 194:
AccessoriesMULLIONS418 - Removable
Page 195 and 196:
9800 & F9800 Rim Type and Fire Exit
Page 197 and 198:
2200 & F2200 Rim Type Panic and Fir
Page 199 and 200:
2260 & F2260 SeriesVertical Rod Typ
Page 201 and 202:
Alarm Exit HardwareFeatures 1-, 3-,
Page 203 and 204:
Trim SelectionESCUTCHEON LEVER DESI
Page 205 and 206:
Electrified Lever TrimCal-Royal’s
Page 207 and 208:
POWER SUPPLIES FORELECTRIFIED EXIT
Page 209 and 210:
AccessoriesMULLIONS418 - Removable
Page 211 and 212:
2200 & F2200 Rim Type and Fire Exit
Page 213 and 214:
®5000 & F5000 Rim Type Panic And F
Page 215 and 216:
Casted TopChassis Ass’yTop Rod500
Page 217 and 218:
Trim SelectionPULL DESIGN5000NL5 ¼
Page 219 and 220:
Fire Exit Hardware SelectorAPPLICAT
Page 221 and 222:
4400 Series • • • • • •
Page 223:
AUTO FLUSHBOLTSMAGNETIC DOOR HOLDER
Page 226 and 227:
AUTO FLUSHBOLTSCONSTANT AND SELF LA
Page 228 and 229:
7 /16“X” and “Y” dimensions
Page 231:
SIGNS
Page 234 and 235:
AMERICANS WITH DISABILITY ACT (ADA)
Page 237:
THRESHOLDS
Page 240 and 241:
THRESHOLD COMPARATIVE CHARTSIZE CAL
Page 244 and 245:
NUMBERS AND LETTERSILLUSTRATION ITE
Page 246 and 247:
ILLUSTRATION ITEM SIZE ITEM # FINIS
Page 248 and 249:
Page 250 and 251:
Easy OperationModel No…………
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
show all

ARCHITECTURAL BUILDERS HARDWARE CATALOG - Cal-Royal

Create successful ePaper yourself

Delete template?

Save as template?