564 Diamond-Fyre Gas Fireplace - FireplaceX | Fireplaces

Installation SpecificationsAlways refer to the and use the Installation Manual for complete install information.Performance: • Variable Input: 20,500 BTUs/hr to 5,100 BTUs/Hr (NG), 4,200 BTUs/Hr (LP)• Heating Capacity: Up to 950 square feet with fan• Steady State Efficiency: 76.5% (NG), 74.2% (LP)• Canadian P4.1 Efficiency: 67.7% (NG), 70.1% (LP)Minimum Framing Dimensions:Top VentRear VentIncluded Firestop (required) Part #250-00747Vent Clearances for 8”(203mm) dia. Vent: 1”(25mm) to the sides,1” (25mm) below, and4” (102mm) above thevent to combustibles.Route the electricalline to the positionto the left rear ofthe fireplace. 33-1/2”851 mmMinimumenclosure height = 38”Rear Vent OnlyRoute the electricalline to theposition to theleft rear of thefireplace.33-1/2”851 mm19-1/4”489 mm24-1/4”826 mm32-1/2”826 mm36-1/2””927 mm16-1/2”419 mm36-1/2”927 mm16-1/2”419 mmHearth Requirements:A non-combustible hearth extension is not required.However, if the heater is installed next to the floor, werecommend a hearth to protect the flooring surface fromdiscoloration.Listings:This appliance was listed by OMNI Test Labs to ANSIZ21.88 - report # 028-F-80c-5. The listing label is attachedto the appliance near the gas control valve.8” (203mm) Diameter Vent4-3/4”121 mm34-1/4”794 mm32-1/2”826 mm18-4/4”476 mm33-1/4”845 mm30-1/4”768 mm28-3/4”730 mm8” (203mm) Diameter VentIAS (ICBO) ApprovalThis appliance was listed by OMNI Test Labs - IAS # TL130.Massachusetts ApprovalSubmitted to the Massachusetts Board of StateExaminers of Plumbers and Gas Fitters30”762 mm16-1/4”413 mm36-1/4”921 mm1”25 mm24-1/4”616 mmWeight: 155 Lbs. (70.4 kg)See our complete line of fireplacesVisit us online: www.fireplacex.comPhotos and illustrations are for descriptive purposes only. We reserve the right to improve or change our products without prior notification.Diamond-Fyre and all other trademarks belong to Travis Industries, inc. Consult the Owner’s Manual for complete installation requirements.© Copyright T. I. 2011/08 Printed in the U. S. A. 98800502