View - AccuStandard

Water Pollution (WP) Inorganic & Petroleumfor AccuTest & AccuValueSelf-TestWP-PT CyanideIPE-CN-002-ATIPE-CN-002-AVSample conc. after prepContains analyte listed belowAnalyte ListTotal CyanideWP-PT Inorganic HardnessIPE-HARD-002-ATIPE-HARD-002-AVSample conc. after prepContains 4 analytes listed belowAnalyte ListCalciumMagnesiumTotal Hardness as CaCO 3Ca Hardness as CaCO 3WP-PT Trace MetalsIPE-MET-003-AT$ 47 / 2 x 20 mLIPE-MET-003-AV$ 47 / 2 x 20 mLSample conc. after prepContains 23 analytes listed belowAnalyte ListAluminumAntimonyArsenicBariumBerylliumBoronCadmiumChromiumCobaltCopperIronLeadManganeseMercuryMolybdenumNickelSeleniumSilverStrontiumThalliumTitaniumVanadiumZinc$ 32 / 20 mL$ 32 / 20 mLSample range0.02-1.2 mg/L$ 35 / 20 mL$ 35 / 20 mLSample range3.5-150 mg/L0.5-50 mg/L15-600 mg/L15- 575 mg/LSample range50-4500 µg/L10-1000 µg/L10-1000 µg/L50-3500 µg/L5-1000 µg/L50-2500 µg/L5-1000 µg/L15-1500 µg/L10-1500 µg/L10-1000 µg/L25-4500 µg/L30-4000 µg/L50-4500 µg/L0.5-40 µg/L20-700 µg/L50-3500 µg/L20-2500 µg/L10-750 µg/L2-1000 µg/L10-1000 µg/L25-500 µg/L50-11500 µg/L25-2500 µg/LWater Pollution (WP) / DMR-QA Inorganic ParametersWP-PT Inorganic MineralsIPE-MIN-005-AT$ 53 / 2 x 20 mLIPE-MIN-005-AV$ 53 / 2 x 20 mLSample conc. after prepContains 12 analytes listed belowAnalyte ListAlkalinity as CaCO 3CalciumChlorideConductivityTotal Dissolved SolidsFluorideTotal Hardness as CaCO 3Ca Hardness as CaCO 3MagnesiumPotassiumSodiumSulfateWP-PT DemandIPE-MIN-006-ATIPE-MIN-006-AVSample conc. after prepContains 4 analytes listed belowAnalyte ListCODBODcBODTOCWP-PT Nutrients #1IPE-MIN-007-ATIPE-MIN-007-AVSample conc. after prepContains 3 analytes listed belowAnalyte ListNitrate-NAmmonia-NOrthoPhosphate-PWP-PT Nutrients #2IPE-MIN-008-AT$ 22 / 20 mLIPE-MIN-008-AV$ 22 / 20 mLSample conc. after prepContains both analytes listed belowAnalyte ListTotal PhosphorousTotal Kjeldahl nitrogen as NSample range5-150 mg/L2-150 mg/L10-500 mg/L25- 2500 µmhos25-2400 mg/L0.2-10 mg/L15- 600 mg/L15- 575 mg/L0.5-50 mg/L2-250 mg/L5 -500 mg/L2-600 mg/L$ 42 / 20 mL$ 42 / 20 mLSample range10-500 mg/L10-275 mg/L10-275 mg/L5-125 mg/L$ 22 / 20 mL$ 22 / 20 mLSample range0.2-50 mg/L0.1-20 mg/L0.01-6 mg/L✦ Designed for NELAC/CASample range0.10-15 mg/L0.3-40 mg/LWP-PT Oil & Grease & TotalPetroleum Hydrocarbon (TPH)IPE-OILG-001-AT ✦IPE-OILG-001-AV ✦Sample conc. after prepContains 2 analytes listed belowAnalyte ListTotal Oil & GreaseTPHWP-PT pHIPE-PH-001-ATIPE-PH-001-AVSample conc. after prepContains analyte listed belowAnalyte ListpHWP-PT Total PhenolicsIPE-PHEN-001-ATIPE-PHEN-001-AVSample conc. after prepContains analyte listed belowAnalyte ListTotal PhenolicsWP-PT Inorganic SolidsIPE-SOL-002-ATIPE-SOL-002-AVSample conc. after prepContains 3 analytes listed belowAnalyte ListSuspended SolidsDissolved SolidsTotal Solids$ 32 / 5 mL$ 32 / 5 mLSample range5-100 mg/L5-100 mg/LTechnical NoteTo be used by gravimetric oil and greasemethods. In addition, this PT sample cannow be used for TPH analysis by gravimetricmethods including the EPA method 1664. Thesample contains analytes typically present inthe environment.$ 27 / 20 mL$ 27 / 20 mLSample range2-12 units$ 32 / 20 mL$ 32 / 20 mLSample range0.03-6 mg/L$ 37 / 4 mL$ 37 / 4 mLSample range5-200 mg/L25-2400 mg/L30-3000 mg/LWP-PT Total Residual ChlorineIPE-TRC-002-AT$ 32 / 20 mLIPE-TRC-002-AV$ 32 / 20 mLSample conc. after prepContains analyte listed belowAnalyte ListSample rangeTotal Residual Chlorine 0.10-6.0 mg/LPT Water Supply Inorganic & PetroTel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • AccuStandard.com13