INSTALLATION GUIDE - K-Flex USA
INSTALLATION GUIDE - K-Flex USA
INSTALLATION GUIDE - K-Flex USA
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>INSTALLATION</strong> OF CONTINUOUS SECTIONSA.B.A.B.Use K-FLEX ® Contact Adhesive (orequivalent) for sealing all butt seams.NOTE: K-FLEX Clad ® systems are providedwith insulation extending beyond the cladsurface to ensure a good vapor seal. Applyto both surfaces. Wait until tacky andapply pressure. Apply K-FLEX Clad ® Tapeover butt seam for maximum vapor barrierand appearance.Seal all butt seams with high grade(marine) silicone sealant (Bostik #70-05A)for watertight applications.<strong>INSTALLATION</strong> OF ELBOWSK-Fit prefabricated fittings can be usedwith the pre-formed K-FLEX Clad ® Elbowcovers to complete any fitting sectionneeded. (Pre-formed K-FLEX Clad ® AL andWT Elbows are available.)A. B. C.A.B.C.Apply K-Fit Elbow to pipe covering.Apply K-FLEX ® Contact Adhesive to closeseam of K-Fit Elbow.Apply K-FLEX Clad ® Elbow and sealseam with PSA and mechanical fastener(K-FLEX ® Rivets).K-FLEX CLAD ® PAGE 4
Change language